|
These buckets are ideal for utility trenching, general excavating and back-filling in soft to moderate ground.
- Width,
9 in 230 mm
to 28 in 711 mm
- Struck Capacity,
.02 yd3 .02 m3
to .09 yd3 .07 m3
- Heaped Capacity,
.018 yd3 .014 m3
to .12 yd3 .092 m3
» View Full Product Line
These buckets are designed for cleaning ditches, sloping, grading and other finish work. Their shallow depth and compact size make working in confined areas easier. Drainage holes allow liquid to empty so material dumps more easily.
Tilt Buckets feature a full 45° of tilt in each direction, powered by two double-acting cylinders.
- Width,
45 in 1142 mm
to 72 in 1800 mm
- Capacity,
.44 yd3 .34 m3
to 2.5 yd3 1.91 m3
» View Full Product Line
These buckets are ideal for cleaning wide trenches, loading materials, slope cutting, grading and finishing work in construction, landscaping and road maintenance applications.
- Width,
32 in 800 mm
to 63 in 1600 mm
- Struck Capacity,
.04 yd3 .031 m3
to .46 yd3 .35 m3
- Heaped Capacity,
.035 yd3 .027 m3
to .55 yd3 .42 m3
» View Full Product Line
For very high abrasion conditions including high quartzite granite.
* Corner (or heel) shrouds, Base Edge End Protectors (BEEPs), liners, base edge segments, and Mechanically Attached Wear Plates (MAWPs) protect the bucket from wear.
* Side wear plates are larger; and
* Sidebar protection has been added for protection against abrasion and gouging wear.
* Adapters are sized to accommodate higher abrasion conditions.
* Tips are up-sized (over the General Duty bucket) for enhanced performance and durability.
- Width,
48 in 1200 mm
to 88 in 2240 mm
- Capacity,
1.84 yd3 1.4 m3
to 7.1 yd3 5.4 m3
- Weight,
3519 lb 1596 kg
to 16230 lb 7362 kg
» View Full Product Line
For digging in low impact, lower abrasion materials such as dirt, loam, and mixed compositions of dirt and fine gravel.
Example: Digging conditions in which General
Duty tip life exceeds 800 hours.
Typically larger General Duty Buckets are the most popular sizes, and are used by site developers to mass excavate in low abrasion applications.
* Lighter structures decrease load time and increase the weight that can be lifted.
* Standard size adapters and tips.
* Sidebars are pre-drilled for optional sidecutters and sidebar protectors.
- Width,
18 in 450 mm
to 96 in 2440 mm
- Capacity,
.27 yd3 .2 m3
to 7.9 yd3 6 m3
- Weight,
504 lb 229 kg
to 12912 lb 5858 kg
» View Full Product Line
High Capacity Buckets are designed and built for use in high production truck loading applications.
With proper application and set up, these buckets will move more material in a minimal amount of passes — maximizing production.
- Width,
79 in 2000 mm
to 101 in 2575 mm
- Capacity,
5 yd3 3.82 m3
to 8.5 yd3 6.5 m3
- Weight,
5232 lb 2373 kg
to 13210 lb 5992 kg
» View Full Product Line
Wide Tip Buckets are intended to perform best in low-impact materials such as dirt and loam where leaving a smoother floor and minimal spillage is necessary. The bucket is engineered to be used exclusively with Cat Wide Tips. Corner adapters face straight forward to create a smooth edge.
- Width,
18 in 450 mm
to 78 in 1950 mm
- Capacity,
.35 yd3 .27 m3
to 4.46 yd3 3.41 m3
- Weight,
699 lb 317 kg
to 5335 lb 2420 kg
» View Full Product Line
General Purpose Buckets for use in low-impact, moderately abrasive materials such as dirt, loam, gravel, and clay.
- Width,
18 in 458 mm
to 78 in 1981 mm
- Capacity,
.33 yd3 .25 m3
to 4.39 yd3 3.34 m3
- Weight,
503 lb 227 kg
to 5330 lb 4075 kg
» View Full Product Line
The most popular excavator bucket style. A good “center line” choice, or starting point, when application conditions are not well known.
For a wide range of impact and abrasion conditions including mixed dirt, clay and rock. Example: Digging conditions where Penetration Plus tip life ranges from 400
to 800 hours.
Heavy Duty Buckets are recommended for trenching in utilities work, and for the general contractor working in a variety of different situations.
* Thicker bottom and side wear plates than General Duty Buckets for more durability.
* Adapters and tips are up-sized for enhanced performance and durability.
* Sidebars are pre-drilled for optional sidecutters and sidebar protectors.
- Width,
24 in 600 mm
to 79 in 2000 mm
- Capacity,
.5 yd3 .38 m3
to 5.49 yd3 4.2 m3
- Weight,
745 lb 338 kg
to 10218 lb 4635 kg
» View Full Product Line
Power Buckets are for use in abrasive applications
where breakout force and cycle times are critical — and for use in materials such as tightly compacted mixed dirt and rock. (Not recommended for clay.) Breakout force is maximized due to decreased tip radius and increased pin spread. Machine cycle times in most material is improved over a standard bucket in a similar application.
- Width,
36 in 900 mm
to 60 in 1500 mm
- Capacity,
1.03 yd3 .79 m3
to 2.43 yd3 1.86 m3
- Weight,
1781 lb 808 kg
to 3441 lb 1561 kg
» View Full Product Line
High strength buckets designed for maximum performance and value over a broad range of applications in abrasive applications such as mixed dirt, clay, and rock.
- Width,
12 in 300 mm
to 36 in 914 mm
- Capacity, struck,
1.5 ft3 .04 m3
to 10.5 ft3 .3 m3
- Capacity, heaped,
1.7 ft3 .05 m3
to 13.7 ft3 .39 m3
» View Full Product Line
Designed to optimize the performance of the Cat® Mini Hydraulic Excavator in a wide variety of applications and materials. Well suited for moving large quantities of material, such as during truck loading applications, and are capable of moving greater volumes of material than the Heavy Duty Buckets. These buckets are machine-specific and are not interchangeable between machine model sizes.
- Width,
12 in 300 mm
to 36 in 914 mm
- Capacity, struck,
2.5 ft3 .07 m3
to 8.2 ft3 .23 m3
- Capacity, heaped,
2.9 ft3 .08 m3
to 10.6 ft3 .3 m3
» View Full Product Line
Rock Buckets for Cat® Mini Excavators are built for aggressive bucket loading in highly abrasive applications such as severe rock.
- Width,
24 in 610 mm
to 30 in 762 mm
- Capacity, struck,
6.7 ft3 .19 m3
to 8.4 ft3 .24 m3
- Capacity, heaped,
8.1 ft3 .23 m3
to 10.9 ft3 .31 m3
» View Full Product Line
This bucket is designed with a patented recessed pin to provide maximum digging performance while keeping the versatility and convenience of a Center-Lock Pin Grabber coupler. Tip radius is reduced and allows up to 10% improvement in breakout force when compared to a conventional pin on bucket and coupler combination.
Center-Lock Pin Grabber Performance Buckets are available in General Purpose, Heavy Duty and Heavy Duty Rock durability.
- Width,
24 in 600 mm
to 74 in 1850 mm
- Capacity,
.43 yd3 .33 m3
to 3.34 yd3 2.56 m3
- Weight,
910 lb 413 kg
to 5514 lb 2501 kg
» View Full Product Line
For higher abrasion conditions such as well shot granite and caliche.
* Bottom wear plates are about 50% thicker than Heavy Duty Buckets.
* Side wear plates are about 40% larger than Heavy Duty Buckets for added protection against abrasive and gouging wear.
* Heavy Duty and Severe Duty Buckets use same size adapters.
* Adapters are sized to accommodate higher abrasion conditions.
* Tips are up-sized (over the General Duty bucket) for enhanced performance and durability.
* Sidebars are pre-drilled for optional sidecutters and sidebar protectors.
- Width,
24 in 600 mm
to 96 in 2440 mm
- Capacity,
.39 yd3 .3 m3
to 7.9 yd3 6 m3
- Weight,
588 lb 267 kg
to 15163 lb 6878 kg
» View Full Product Line
These buckets are ideal for cleaning wide trenches, loading materials, slope cutting, grading and finishing work in construction, landscaping and road maintenance applications.
- Width,
43 in 1100 mm
to 63 in 1600 mm
- Heaped Capacity,
3.8 ft3 .11 m3
to 9.89 ft3 .28 m3
- Bucket Weight,
293 lb 133 kg
to 550 lb 250 kg
» View Full Product Line
|
United States / Canada [change]
Visit Caterpillar.com
.png){kind=icon}
Social Media