Heavy-Duty Boom and StickThe heavy duty reach boom and heavy duty 10.5 ft stick are more robust than the standard reach boom and stick. The "heavy-duty" features include thicker plates throughout the design to handle the increased loading experienced in transfer station applications.
The front linkage has a maximum horizontal reach of 9.4 m (31 ft) and maximum vertical pin height of 8.8 m (29 ft). Thus, the working range of the machine provides an excellent match for loading hauling units from a platform or from level ground.
Welded Box-Section StructuresThe boom and stick are designed and built for maximum durability and performance. Efficient design of welded box-section structures with thick, multi-plate fabrications and internal baffle plates in high stress areas maximizes strength and durability provided the loading conditions of transfer stations.
Stress Relieved Boom and StickThe boom and stick are stress relieved to maximize the strength of the weld joints. The process of stress relieving also allows for the structure weight to be minimized, allowing heavier payload capacity.
Front Linkage The 330C MH Waste Handler front linkage is designed to provide the excellent reach and durability necessary to meet the requirements of transfer station applications. » Learn More
Heavy-Duty Upper FrameBox-section reinforcement of the cab outrigger frames support cab risers for improved durability.
Horizontal mounting plate provides more surface area for swing drive and swing bearing mounting bolts to handle increased loading.
The heavy-duty upper frame has many specifically designed features for added strength and improved durability in waste handling applications. It is composed of higher strength material and thicker steel sections to handle the increased loading activity seen in waste transfer stations.
Boom tower double plates add thick steel reinforcements to handle the greater stresses caused by increased loading.
Box-section cylinder mounts allow for improved resistance against increased torsional loads and payloads.
Waste Handler Structures The 330C MH Waste Handler has many structural components that add strength to the machine to improve it's durability. » Learn More
Rubber BumpersThe rubber bumpers provide much needed guarding to protect the sheet metal of the machine from being damaged while maneuvering in tight areas.
Swivel GuardThe swivel guard, designed specifically for waste applications, protects the swivel from the wrapping of debris. This will allow more uptime through the decrease in maintenance associated with removing video tape and wire from the swivel.
Swing Bearing GuardThe swing bearing guard is a bolt on guard that protects the swing bearing from any damage by shielding it from any potential sources of wrapping such as video tapes and wire. It also prevents packing of debris around the swing bearing.
Falling Object GuardsThe optional falling object guard protects the cab and front windshield from debris in transfer stations.
Waste Handler Guarding The 330C MH Waste Handler is equipped with special guarding, designed specifically for the challenges faced in waste handling applications. » Learn More
Trash Resistant Cooling SystemA Trash Resistant Cooling arrangement reduces cooling system maintenance and downtime when operating in environments with large amounts of airborne debris such as feeding shredders in scrap applications, waste transfer stations, demolition and forestry applications. This package will also help avoid costly engine and hydraulic repairs and downtime resulting from overheating caused by a plugged cooling system. This arrangement is standard on the 330C L MH Waste Handler and can be ordered as a custom attachment on 330C L excavators.
Trash Resistant Cooling Features- Debris Filters – These stainless steel mesh filters trap debris before it enters the house, keeping it out of the radiator and oil cooler. These filters can be easily removed and cleaned. A second set of filters minimizes downtime, allowing the operator to keep working while the first set is cleaned.
- 6 fpi straight fin Oil Cooler and Radiator Cores.
- Flexxaire Automatic Reversing Fan on the radiator.
- Hydraulic Automatic Reversing Fan on the oil cooler.
- Access doors for cleaning the back side or the oil cooler and radiator cores.
Heavier CounterweightThe 330C MH Waste Handler has been outfitted with a counterweight that is 25% heavier than a standard 330C L counterweight for better stability while handling waste.
Cab RiserThe optional 1.2 m (4 ft) cab riser provides for elevated operating height to improve visibility while loading waste into a hauling unit and allows the operator to see over obstructions in the transfer station.
Turbine PrecleanerThe standard turbine precleaner helps keep debris away from the cooling system by removing debris from the air intake.
The 330C MH Waste Handler is also equipped with the SyKlone Optimax dual stage engine precleaner which purges remaining debris from intake air, providing longer air filter and engine life.
SyKlone Gideon Cab Air PrecleanerThis cab air precleaner extends cab air filter life, increases operator comfort by effectively eliminating dust and odor, and keeps evaporator and heater coils clean.
Cab Mounted BeaconThe cab mounted beacon flashes whenever the master disconnect is on.
In-cab Master DisconnectAn additional master disconnect switch is provided in the cab for easier operator access.
Waste Handling Features The waste handler has been designed with many benefit adding features to enhance its performance in waste applications. » Learn More
C-9 EngineThe six-cylinder, turbocharged engine is EPA Tier 2 and EU Stage II emissions compliant and is built for power, reliability, and fuel economy.
Automatic Engine Speed ControlThe two-stage, one-touch control maximizes fuel efficiency and reduces sound levels.
Low Sound, Low VibrationThe C-9 design improves operator comfort by reducing sound and vibration.
HEUI™ Fuel SystemThe HEUI fuel system provides improved emissions to meet EPA Tier 2 and EU Stage II regulations and lowers fuel consumption.
Hydraulic Cross Sensing SystemImproves productivity with faster implement speed and quick, strong pivot turns.
Fine Swing ControlFine swing control cushions swing start and stop for better implement control.
Hydraulic Cylinder SnubbersThe hydraulic cylinder snubbers at the rod-end of the boom cylinders and both ends of the stick cylinders cushion shock to improve cylinder life.
ControllabilityThe hydraulic system offers very precise operator control to reduce fatigue and improve operator efficiency translating into enhanced machine performance and productivity.
Boom and Stick Regeneration CircuitBoom and stick regeneration circuit increases efficiency and reduces cycle time for higher productivity and lower operating costs.
Engine and Hydraulics Caterpillar designed engine and hydraulics work together to give the 330C MH Waste Handler an exceptional combination of speed and power required in waste applications. » Learn More
Trash GrappleThe Cat Work Tools trash grapple has been designed to meet the requirements of waste handling. Powered by the bucket cylinder, the trash grapple mechanically works to compact trash while placing it into the bed of the hauling unit. This helps to maximize the amount of waste that can be placed into one unit, maximizing efficiency.
Sorting GrappleThe Sorting Grapple is hydraulically controlled to facilitate the ease of handling and sorting waste materials. The grapple is 360° rotational to aid in sorting and placing waste in tighter areas. As the grapple is closed, waste is compacted, allowing more waste to be fit into the hauling/processing unit.
Work Tools Mechanical and hydraulic work tools are offered by Caterpillar to maximize machine performance in waste applications. » Learn More
Cat DealersYour Cat Dealer offers a wide range of services that can be set up under a customer support agreement when you purchase your equipment. To help you get the best return on your investment, the dealer will help you choose a plan that can cover everything from machine and attachment selection to replacement.
SelectionMake detailed comparisons of the machines your are considering before you purchase. What are the job requirements? What production is needed? What is the cost of lost production? Your Cat Dealer can help you find precise answers to these questions.
PurchaseLook past the initial purchase price of the machine. Consider the financing options available as well as day-to-day operating costs. This is also the time to look at dealer services that can be included in the cost of the machine to yield lower equipment owning and operating costs over the long run.
MaintenanceWhat is the cost of preventative maintenance? More and more equipment buyers are planning for effective maintenance before buying equipment. Choose from your dealer's wide range of maintenance services at the time you purchase your machine. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as Scheduled Oil Sampling and Technical Analysis help you to avoid unscheduled repairs.
ReplacementRepair, rebuild, or replace? Your Cat Dealer can help you evaluate the costs involved so you can make the right choice.
Product SupportYou will find nearly all parts at our dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. You can also save money with remanufactured components.
Complete Customer Support Cat Dealer services help you operate longer with lower costs. » Learn More
| 
United States / Canada [change]
Visit Caterpillar.com
.png){kind=icon}
Social Media