CB14 Full Flush Utility Roller

Specifications

Weights

Operating Weight

3527 lb

1600 kg

Maximum Weight at Front Drum

1587 lb

720 kg

Maximum Weight at Rear Drum

1940 lb

880 kg

Operating Specifications

Standard Compaction Width

35 in

900 mm

Curb Clearance

14.5 in

370 mm

Turning Radius Inside Drum Edge

8.5 ft

2600 mm

Ground Clearance

10 in

250 mm

Static Linear Load

56 lb/in

9.4 kg/cm

Travel Speed – Maximum

5 mph

8.5 km/h

Engine

Gross Power

22 hp

16.1 kW

Engine Model

C1.1

C1.1

Dimensions

Overall Length

80 in

2050 mm

Wheelbase

51 in

1300 mm

Height at Steering Wheel

64 in

1630 mm

Overall Width

37 in

960 mm

Drum Diameter

22.5 in

575 mm

Drum Width

35 in

900 mm

Maximum Machine Height

94 in

2400 mm

Vibratory System

Frequency

3200 vpm

53.3 Hz

Centrifugal Force per Drum – Maximum

2565 lb

11.4 kN

Centrifugal Force per Drum – Minimum

2318 lb

10.3 kN

Nominal Amplitude – High

0.016 in

0.4 mm

Service Refill Capacities

Fuel Tank Capacity

7.9 gal

30 L

Water (Spray) Tank Capacity

39.6 gal

150 L

Benefits & Features

Power The liquid-cooled C1.1 engine provides a gross power of 16.1 kW (21.6 hp) at 2400 rpm. The low engine rpm results in low sound levels that benefits the operator and surrounding environment. Optimum Fuel Efficiency The operating engine speed of 2400 rpm maximizes fuel efficiency, providing more time spent on the job and less time spent refueling. High Capacity Cooling System The high capacity cooling system with an integrated water and oil cooler keeps engine temperatures low in order to maximize fuel efficiency and minimize emissions. Cat® C1.1 Engine The C1.1 engine provides efficient power with low sound levels while meeting U.S. EPA Tier 2 Engine Emission requirements. » Learn More Fully-Equipped Console An easy-to-understand instrument panel integrates an hour meter and light indicators for machine functions. The key switch integrates an automatic engine pre-heat feature to assist in cool-weather starting. The steering wheel utilizes a steering knob that simplifies maneuverability in turns. Isolated Platform Vibration transmitted to the operator is limited due to the rubber isolation mounts located on the base of the operator’s station and under the seat. Smooth Operation The hydraulic propel lever provides smooth and precise control when working in tight quarters. Good Visibility The sloped engine enclosure and low profile rear frame provide good visibility. Foldable ROPS (Optional) The foldable ROPS can be lowered forward or rearward without the use of tools; providing easy transport. Operator’s Station The operating environment provides easy-to-use controls and good visibility for day-long comfort. » Learn More Balanced Frequency and Amplitude The machines incorporate a frequency of 53.3 Hz (3,200 vpm), and an amplitude of 0.4 mm (0.016"), providing a smooth mat finish. Vibration Selection The CB14 full flush version utilizes a rear-drum-only vibratory selection. Automatic Vibratory Control The vibratory system automatically starts whenever the propel lever is moved from the neutral position. Dual Drum Drive The dual driving drums provide continuous full drum traction with hydraulic motors fitted in series. Drum Scrapers Each drum utilizes a spring-loaded, self-adjusting scraper, and a fixed position scraper to prevent material build-up. Vibratory System and Drum The vibratory system provides good balance between frequency and amplitude in order to meet various job site conditions. » Learn More Visibility Visibility to the drum edges provides the operator with complete control when working near objects. Flush Compaction The CB14 Full Flush incorporates a 900 mm (35") offset front drum. The drum is offset on the right side providing flush compaction near walls, curbs, and other vertical obstructions. » Learn More Large Capacity Water Tank The 150 L (39.6 gal) water tank is protected within the machine frame. The large tank design provides extended operation and a single fill point for easy refills. Efficient Drum Coverage The standard gravity-fed water spray system utilizes perforated plastic spray bars that provide complete drum coverage. Pressurized Water Spray System (Optional) The optional pressurized water spray system utilizes a three-mode spray system with constant, off, or intermittent capabilities. This system provides triple filtration, and the filters and spray nozzles can be easily removed without the use of special tools. Water Spray System Corrosion-proof components system provides long life and reliable operation. » Learn More Vertical Lift Engine Enclosure The vertical lift engine enclosure allows fast access to routine service points. Grouped Service Points External engine components, hydraulics, and routine service points are grouped for easy access. Extended Life Oils Extended life oils increase service intervals for the vibratory system, hydraulic system, and engine. Remote-mounted drains provide simplified collection of fluids. Quick-Connect Hydraulic Test Ports The quick-connect hydraulic test ports simplify system diagnosis. Protected Electrical System The electrical system utilizes color-coded wires, all-weather connections, and nylon-braided wrap to provide reliability. Serviceability The CB14 Full Flush provides the reliability and serviceability that you’ve come to expect from Caterpillar. » Learn More

Optional Equipment

CB14 Full Flush Optional Equipment

Backup Alarm

Battery Disconnect Switch

Biodegradable Hydraulic Oil

Foldable ROPS

Light Protector Grids

Pressurized Water Spray System

Roading and Working Lights

Single Lifting Point

Spark Arrestor Muffler

Suspension Seat with Switch

Warning Beacon

Working Lights