Specifications

Weights

Operating Weight

8688 lb

3940 kg

Maximum Weight at Front Drum

4278 lb

1940 kg

Maximum Weight at Rear Drum

4410 lb

2000 kg

Operating Specifications

Standard Compaction Width

51 in

1300 mm

Curb Clearance

23.5 in

602 mm

Turning Radius Inside Drum Edge

9.83 ft

3000 mm

Ground Clearance

11 in

284 mm

Static Linear Load

86 lb/in

15.2 kg/cm

Travel Speed – Maximum

8 mph

12.5 km/h

Engine

Gross Power

46 hp

34.1 kW

Engine Model

C2.2

C2.2

Dimensions

Overall Length

123 in

3120 mm

Wheelbase

91 in

2320 mm

Height at Steering Wheel

72 in

1840 mm

Overall Width

55 in

1390 mm

Drum Diameter

31 in

800 mm

Drum Width

51 in

1300 mm

Maximum Machine Height

100 in

2560 mm

Vibratory System

Centrifugal Force per Drum – Maximum

7448 lb

33.1 kN

Frequency

69/61 Hz (4,140/3,660 vpm)

69/61 Hz (4,140/3,660 vpm)

Nominal Amplitude – High

0.015 in

0.37 mm

Service Refill Capacities

Fuel Tank Capacity

15 gal

57 L

Water (Spray) Tank Capacity

79 gal

300 L

Benefits & Features

Power The liquid-cooled C2.2 engine provides a gross power of 34.1 kw(46 hp) with a torque of 143 Nm for good performance and reliability on grades and in tough conditions. Large Cooling System The large cooling system with integrated water and oil coolers keep engine temperatures low in order to maximize fuel efficiency and minimize emissions. High Ambient Cooling The high ambient cooling system provides efficent operation in high ambient temperatures. Low Sound Levels Low sound levels are achieved in both operating speeds. An intermediate throttle position enables even quieter operation for optimu operator comfort. Cat® C2.2 Engine The C2.2 engine provides efficient power while meeting U.S. EPA Tier 4a engine emission requirements. » Learn More Operator's Station The operator's station incorporates a fully-equipped console and an adjustable suspension seat. Arm and wrist rests provide better operator comfort for day-long productivity. The steering wheel includes a steering knob for easy maneuverability in turns. Instrument Panel The easy-to-understand instrument panel integrates a fuel level indicator, hour meter and light indicators for machine functions. The key switch includes an automatic engine pre-heat feature that improves cold-weather starting. Smooth Operation The hydraulic propel lever's two step regulating curve provides smooth and precise control at low speed. Machine speed increases gradually in the first half of lever stroke for optimum control in confined areas. The second half of lever stroke enables the maximum propel speed to be reached quickly. Foldable ROPS (Optional) The foldable ROPS includes two gas shocks that assist the operator and folds forward or backward without the use of special tools. Operator’s Station The convenient, comfortable operating environment with three-position seating provides good visibility and promotes day-long productivity. » Learn More Dual Frequency Vibratory System The standard vibratory system incorporates two frequencies of 61 Hz (3,660 vpm) and 69 Hz (4,140 vpm) in order to provide application versatility. Vibratory Selection A vibratory selection switch provides standard front, rear and both drum vibratory capabilities. Automatic Vibratory Control The vibratory system includes an automatic start feature that activates whenever the propel lever is moved from the neutral position. Rear Drum Vibratory Delay The rear drum vibratory delay feature controls the start of the rear drum in order to assist power management on slopes. Pod-style Eccentric Weights The eccentric weights are enclosed in a pod-style housing providing cleanliness that extends bearing life. Vibratory System The vibratory system provides good balance between frequency and amplitude in order to meet various job site conditions. » Learn More Water Tank A 300L (79 gal) high-capacity polyethylene water tank is enclosed within the machine frame, providing extended operation. the large water tank fill and drain allow the system to be filled or drained within minutes. Spray Capabilities The standard pressurized water spray system with constant or intermittent capabilities provides extended operation between refills. Water Pump and Filters The extended life water pump and filters are conveniently located for easy access while providing optimum spray and flow. Water Filtration Triple water filtration reduces machine downtime caused by system clogs. Water Spray System Corrosion-proof components provide long life and reliable operation. » Learn More Vertical Lift Engine Enclosure The vertical lift engine enclosure allows fast access to routine service points. Oil-bath Lubrication An oil-bath lubricates the eccentric weight bearings, extending routine maintenance to 3 year/3000 hour intervals. Water Spray System The filters can be easily removed without the use of special tools. Extended Life Oils Extended life oils increase maintenance intervals for the engine oil, hydraulic system and vibratory system. Remote-mounted drains provide simplified collection of fluids. Quick-Connect Hydraulic Test Ports The quick-connect hydraulic test ports simplify system diagnosis. Color-coded Electrical System Electrical wiring is color-coded and numbered for simple troubleshooting. Nylon-braided wrap and all-weather connectors ensure electrical system integrity. Reliability and Serviceability The CB34 provides the reliability and serviceability that you've come to expect from Caterpillar. » Learn More

Optional Equipment

CB34 Optional Equipment

Roll Over Protective Structure(ROPS)

Sun Canopy

Working Light Package

Roading and Working Light Package

Rotating Beacon

Suspension Seat

Suspension Seat with Seat Switch

Spark Arrestor Muffler

Engine Tachometer

High Ambient Cooling

Non-Machined Drum Edges

Drum End Guards

Cocoa Mats

Water Distribution Mats

Tire Wetting System

Traction Control