Specifications

Weights

Operating Weight

3351 lb

1520 kg

Maximum Weight at Front Drum

1676 lb

760 kg

Maximum Weight at Rear Drum

1675 lb

760 kg

Operating Specifications

Standard Compaction Width

39 in

1000 mm

Curb Clearance

16 in

400 mm

Ground Clearance

9 in

220 mm

Static Linear Load

42.9 lb/in

7.6 kg/cm

Travel Speed – Maximum

6 mph

9 km/h

Engine

Gross Power

22.5 hp

16.8 kW

Engine Model

Kohler KDW1003

Kohler KDW1003

Dimensions

Overall Length

77 in

1950 mm

Overall Width

43 in

1102 mm

Drum Diameter

22 in

560 mm

Drum Width

39 in

1000 mm

Maximum Machine Height

100 in

2545 mm

Vibratory System

Frequency

3900 vpm

65 Hz

Centrifugal Force per Drum – Maximum

3400 lb

15 kN

Nominal Amplitude – High

0.036 in

0.92 mm

Service Refill Capacities

Fuel Tank Capacity

6.1 gal

23 L

Water (Spray) Tank Capacity

26.4 gal

100 L

Benefits & Features

Roomy Operating Station The roomy operating station with abundant leg room and standard, adjustable seat improves visibility. The seat is equipped with an operator presence sensor for enhanced safety and water drainage capability. Instrument Panel The controls are centrally located for operator ease and safety. Key controls such as drum vibe selection, water spray on/off and intermittent settings are logically placed and easy to adjust. The easily observed warning lights provide quick feedback to the operator. Visibility The sloped engine hood enables excellent forward visibility and minimal side clearance creates direct sight lines to working areas. Comfort and Control Operators appreciate added comfort, and paving contractors increasingly realize its value, too. Comfortable operators stay fresh and alert throughout their shifts, providing both safety and productivity benefits. » Learn More Powerful Engine The Kohler KDW1003 4-cycle, 3-cylinder liquid cooled diesel engine delivers 16.8 kW (22.5 hp) of power @ 2850 rpm. It meets U.S. EPA Tier 4 Final engine emissions standards, has a pre-heat starting system, and is serviced and supported by Cat® Dealers. Cooling System The cooling system with integrated water and oil cooler utilizes an aluminum radiator that provides corrosion resistance and reliability. Large space between cores provide efficient cooling and easy cleaning. The system is effective in high-ambient temperatures up to 50º C (122º F). Smooth, Efficient Powertrain The CB14B delivers plenty of power to keep the roller productive, even on steep grades. The engine is quiet thanks in part to the belt-driven, overhead camshaft and low turbulence. The large cooling system provides efficient performance in normal and high ambient temperatures. » Learn More Size and Steering The articulated frame with sealed articulation bearings has a low center of gravity that provides optimum stability on asphalt or soil/aggregate. Transportability The foldable ROPS facilitates machine transportability and can be folded forward without the use of tools. The short machine length allows it to fit crosswise on a trailer, while high ground clearance facilitates driving up trailer ramps. The machine is equipped with four lifting points for attaching an optional spreader bar. Maneuverability and Transport The size of the CB14B helps it go where other rollers can’t. The CB14B’s minimal side clearance enables optimal maneuverability next to curbs and obstacles, while the low center of gravity provides stability when operating in open areas or tight locations. » Learn More Vibratory System and Drums The CB14B utilizes 1000 mm (39") tandem vibratory drums. Vibratory selection includes front drum only or both drums for versatility on the job site. The system automatically starts when the propel lever is engaged. Dual Drum Drive Powertrain The dual-drum drive powertrain provides continuous full-drum traction on soft base materials, uneven surfaces and steeper grades. The rounded drum edge prevents cutting into mat for better mat quality. Perfectly Matched The CB14B is designed and built to provide options that precisely match your applications. The vibratory frequency and amplitude are optimized to provide a smooth mat in a variety of jobsite conditions. » Learn More Pressurized System The standard 100 L (26 gal) tank maximizes time between refills. Eight intermittent spray settings optimize usage, while four nozzles at rear and front of each drum evenly distributes water coverage. Easy Service The system is equipped with corrosion-proof materials that are easy to clean. The spray bars and spray nozzles can be removed by hand, without the use of tools. The system is double-filtered system to help prevent clogging and a single drain port simplifies clean-out. Consistent Water Spray Coverage Preventing asphalt pickup is key to keeping a fresh mat in place. The water spray system on the CB14B Utility Roller includes many features that ensure quality. » Learn More Easy Component Access The engine hood and operating platform are equipped with lift assist for quick access and servicing. The battery and water pump are easy to reach with the operator platform in the raised position. External engine components, hydraulics and routine service points are grouped for simplified access and ecology-minded draining. Effortless Maintenance Large space between radiator and oil cooler core provide easy cleaning. The fuel and water tanks are also conveniently located for fast cleaning. The electrical system utilizes color-coded wires, all-weather connections and nylon braiding to provide reliability and protection. Serviceability Productivity isn’t just found while the roller is moving. Maintenance and service efficiencies also impact your bottom line. » Learn More

Optional Equipment

CB14B - 1000 mm (39") Drums Optional Equipment

Foldable ROPS

Fixed ROPS

Suspension Seat

Lifting Bar

Warning Beacon

Working Lights