RB230 – Roof Bolter

Specifications

Specifications

Operating Height

54 in

1372 mm

Boom

Dual

Dual

Frame

Articulated

Articulated

Dimensions (approximate)

ATRS reach – with 32x12.5-15 tires

9.88 ft

3010 mm

ATRS reach – with 35x15-15 tires

10 ft

3048 mm

Bolt tightening torque (adjustable)

190 ft-lb

258 N·m

Chassis height – with 32x12.5-15 tires

2.42 ft

737 mm

Chassis height – with 35x15-15 tires

2.54 ft

775 mm

Chassis overall width

9.04 ft

2756 mm

Drill boom feed

7.33 ft

2235 mm

Drilling feed thrust (maximum)

10000 lb

4536 kg

Drilling torque (variable)

310 ft-lb

420 N·m

Ground clearance – with 32x12.5-15 tires

8 in

203 mm

Ground clearance – with 35x15-15 tires

9.5 in

241 mm

Inside turn radius

9.5 ft

2896 mm

Maximum boom separation

17.67 ft

5385 mm

Minimum boom separation

3.83 ft

1168 mm

Minimum tramming height – with 32x12.5-15 tires

3.87 ft

1181 mm

Minimum tramming height – with 35x15-15 tires

4 ft

1219 mm

Outside turn radius

21.5 ft

6553 mm

Overall length with ATRS

25.17 ft

7671 mm

Steering articulation

80° total

80° total

Tram speed – fast

2.38 m/sec (0-130 fpm)

2.38 m/sec (0-130 fpm)

Tram speed – slow

1.19 m/sec (0-65 fpm)

1.19 m/sec (0-65 fpm)

Wheelbase

6.67 ft

2032 mm

Drive Train

Type

Four wheel planetary drive; each drive consists of a Fairfield W3B torque hub along with a Char-Lynn series 2000 hydraulic motor

Four wheel planetary drive; each drive consists of a Fairfield W3B torque hub along with a Char-Lynn series 2000 hydraulic motor

Automatic Parking Brake

Type

Two spring applied, hydraulic released, fail safe brakes at front of machine.

Two spring applied, hydraulic released, fail safe brakes at front of machine.

Hydraulics

Boom Feed Cylinder

Two (2) 165 mm (6.5 in) bore, double acting cylinder on each boom with in line check valve, one per drilling assembly.

Two (2) 165 mm (6.5 in) bore, double acting cylinder on each boom with in line check valve, one per drilling assembly.

Boom Swing Cylinder

Two (2) 89 mm (3.5 in) bore, double acting cylinders, one per drilling assembly.

Two (2) 89 mm (3.5 in) bore, double acting cylinders, one per drilling assembly.

Pump

Four stage gear pump rated at 132/132/57/57 L/min (35/35/15/15 gal/min) at 1,770 rpm with spline fit to pump motor.

Four stage gear pump rated at 132/132/57/57 L/min (35/35/15/15 gal/min) at 1,770 rpm with spline fit to pump motor.

Reservoir

568 L (150 gal) capacity reservoir with 7 micron return filtration, filter by-pass and “in tank” strainer.

568 L (150 gal) capacity reservoir with 7 micron return filtration, filter by-pass and “in tank” strainer.

Stab Foot Cylinder

Two (2) 101 mm (4 in) bore, double acting cylinders, one per drilling assembly.

Two (2) 101 mm (4 in) bore, double acting cylinders, one per drilling assembly.

Steering Cylinder

Two (2) 101 mm (4 in) bore, double acting cylinders.

Two (2) 101 mm (4 in) bore, double acting cylinders.

Sumping Cylinder

Four (4) 38 mm (1.5 in) bore, double acting cylinders two per drilling assembly.

Four (4) 38 mm (1.5 in) bore, double acting cylinders two per drilling assembly.

Valve Banks

One (1) ATRS and vertical articulation valve bank.

One (1) ATRS and vertical articulation valve bank.

Valve Banks

One (1) inch tram valve bank at rear of operator's side drilling assembly.

One (1) inch tram valve bank at rear of operator's side drilling assembly.

Valve Banks

One (1) steering valve bank controlled by means of a joy stick valve.

One (1) steering valve bank controlled by means of a joy stick valve.

Valve Banks

One (1) cable reel and vertical articulation valve bank

One (1) cable reel and vertical articulation valve bank

Valve Banks

All valve banks are spring returned, bi-directional with main relief set at 13.79 Mpa (2,000 psi).

All valve banks are spring returned, bi-directional with main relief set at 13.79 Mpa (2,000 psi).

Valve Banks

All other pressures are set for each function accordingly.

All other pressures are set for each function accordingly.

Valve Banks

Two (2) boom function valve banks, one per drilling assembly.

Two (2) boom function valve banks, one per drilling assembly.

Valve Banks

One (1) tram valve bank controlled by means of a joystick valve in operator's compartment

One (1) tram valve bank controlled by means of a joystick valve in operator's compartment

Electrical

Start

Push buttons at tram and drill stations.

Push buttons at tram and drill stations.

Stop

Tape switch (panic strip) at tram and drill stations that de-energize electrical system and applies automatic brake.

Tape switch (panic strip) at tram and drill stations that de-energize electrical system and applies automatic brake.

Controller

Type

Size 4 vacuum contactors, 1.5 KVA transformer and 150 amp circuit breaker.

Size 4 vacuum contactors, 1.5 KVA transformer and 150 amp circuit breaker.

Frame

Type

Low profile with bends utilized where applicable to reduce the number of indeterminate stresses introduced by welding.

Low profile with bends utilized where applicable to reduce the number of indeterminate stresses introduced by welding.

Operator’s Drill Station Area

Components

Hydraulically operated drill boom and stab foot functions.

Hydraulically operated drill boom and stab foot functions.

Components

ATRS function control and all other positioning function control.

ATRS function control and all other positioning function control.

Components

Vertical articulation function control.

Vertical articulation function control.

Components

Storage tool tray on each boom for drill steel, starter steel, drill bits and etc.

Storage tool tray on each boom for drill steel, starter steel, drill bits and etc.

Components

Inch tram function control (left hand drilling assembly only).

Inch tram function control (left hand drilling assembly only).

Components

25 mm (1 in) thick, hydraulically adjustable drill station canopy on each drilling assembly.

25 mm (1 in) thick, hydraulically adjustable drill station canopy on each drilling assembly.

Tram Station Area

Components

25 mm (1 in) thick manually adjustable canopy.

25 mm (1 in) thick manually adjustable canopy.

Components

Heavy duty seat.

Heavy duty seat.

Components

Full tram function control.

Full tram function control.

Components

Power fill function control.

Power fill function control.

Components

Vertical articulation function control.

Vertical articulation function control.

Components

Cable reel function control.

Cable reel function control.

Components

Four pressure gauges.

Four pressure gauges.

Components

Steering function control.

Steering function control.

Reservoir Fill System

Type

Power hydraulic fill, allows hydraulic oil to be added to reservoir without hand pumping.

Power hydraulic fill, allows hydraulic oil to be added to reservoir without hand pumping.

Manuals

Types

Two parts manuals.

Two parts manuals.

Types

One LinkOne CD which includes all above manuals in electronic format.

One LinkOne CD which includes all above manuals in electronic format.

Types

Two operation/maintenance manuals/troubleshooting guides.

Two operation/maintenance manuals/troubleshooting guides.

Miscellaneous

Kits

Seven (7) oil sampling kits.

Seven (7) oil sampling kits.

Optional Equipment

RB230 Optional Equipment

Voltage/Blower Option

• 440 Volt AC, Roots Whispair Blower – electrical system with pump motor rated at 80 hp; blowers rated at flows to 81 CFM at 508 mm (20") Hg. Each vacuum blower is directly belt driven from the electric motor by means of sheaves and “v” belts.

Lighting Option

• MCI Fluorescent Lighting, High – area lighting with one headlight on front and rear for high seam applications up to 3048 mm (10 ft).

Cable Reel Option

• 610 mm (24 in) diameter for #2/3C Round Cable – 106 680 mm (350 ft) capacity horizontal type reel with free payout and hydraulic motor, chain drive wind in for recommended #2/3C, GGC round trailing cable. Unit is supplied with 6096 mm (20 ft) of recommended cable.

Tram Canopy Option

• Tram Canopy, 1117 mm (3 ft 8 in) minimum height – manually adjustable tram canopy with a minimum height of 1168 mm (3 ft 10 in) and a maximum height of 1397 mm (4 ft 7 in) at 216 mm (8.5 in) ground clearance.

Drill Chuck Option

• Universal, Extended Dry/Deep Splined Chuck – chuck protrudes above drill head by 61 mm (2.375 in) with no need for drill chuck retention.

ATRS Option

• 3226 mm (10 ft 7 in) Reach, 3480 mm (11 ft 5 in) to 4115 mm (13 ft 6 in) Wide Sumping Crossbeam – T-Bar with hydraulic sump roof support contact rocker arms to allow crossbeam to extend from 3480 mm (11 ft 5 in) to 4115 mm (13 ft 6 in). This T-Bar consists of a primary and secondary cylinder along with two 305 mm (12 in) sumping cylinders.

Tire/Wheel Option

• Four 35x15-15, 889 mm (35 in) Foam Filled Tires – 20 ply, 889 mm (35 in) maximum form diameter foam filled tires mounted on rim assemblies.

Drill Speed Option

• 650 RPM Maximum Drill Speed – generated by means of a 32 mm (1.25 in) gear width hydraulic motor.

Controller Cover/Oil Level Switch Option

• Oil Level Switch, Light Only – above cover assembly with the addition of a low oil warning light.

Oil Filter Brand Option

• Schroeder “Spin-On” Oil Filter – 7 micron return side filter. The filter is equipped with by-pass and external dirty filter indication.

Blower Exhaust Location Option

• Left Side, Operator’s Side – at rear of machine.

Roof Bolter Accessories

• Pre-Duster Installation – remote tank with a 122 m3 (0.4 ft3) capacity that removes larger dust particles automatically, when stab cylinder is activated.

• One Hand Rotation/Drill Feed Control Installation.

• Schroeder Test Mate Installation – four test ports, one for each stage of the main hydraulic pump.

• Grease Zone Lubrication Installation

• Torque Gauge Installation – monitor the amount of torque being applied to the roof bolts during installation (one gauge for each drilling assembly).