Specifications

Weights

Operating Weight – Max Ballast

59525 lb

27000 kg

Operating Weight - Standard Machine Empty

22050 lb

10000 kg

Operating Weight - Max Water Ballast

28660 lb

13000 kg

Operating Weight - Max Wet Sand Ballast

35275 lb

16000 kg

Average Weight per Wheel

3571 lb

1620 kg

Average Weight per Wheel – Max Ballast

7451 lb

3380 kg

Average Weight per Wheel – No Ballast

2755 lb

1250 kg

Operating Weight – No Ballast

22050 lb

10000 kg

Operating Specifications

Compaction Width

82 in

2090 mm

Turning Radius - Inside

240 in

6100 mm

Rolling Width

82 in

2090 mm

Turning Radius - outside

342 in

8700 mm

Ground Clearance

10 in

260 mm

Number of Wheels

8

8

Travel Speed – Maximum

12 mph

19 km/h

Turning Radius – Inside

20 ft

6.1 m

Engine

Gross Power

133 hp

98 kW

Bore

4.13 in

105 mm

Stroke

5 in

127 mm

Engine Model

C4.4

C4.4

Dimensions

Overall Length

210 in

5350 mm

Overall Width

85 in

2160 mm

Height at Steering Wheel

96 in

2450 mm

Height at ROPS

118 in

3000 mm

Maximum Machine Height

118 in

3000 mm

Tires

Tires

13/80 R20

13/80 R20

Service Refill Capacities

Fuel Tank Capacity

71 gal

270 L

Water (Spray) Tank Capacity

100 gal

380 L

Benefits & Features

Compaction Width Eight 13/80 R20 rubber tires provide overall compaction width of 2090 mm (82") with 25 mm (1") overlap. Flexible Ballast Ballast options include modular and non-modular steel, sand, and water. The 6.5 metric ton (7.1 U.S. ton) modular steel can be easily added or removed through bolt-on side panels. The internal, non-modular steel consists of 6.1 metric tons (6.7 U.S. ton). Also, a 3 cubic meter (793 gal) water-tight chamber with baffled compartments prevent surge, and balance weight. Oscillating Tires Oscillating front and rear tires deliver vertical and horizontal forces that reduce air voids, providing surface uniformity. Heat retention covers trap heat to keep the tires warm and prevent pick-up. They can be easily stored when not in use. Air-on-the-Run The 13/80 R20 rubber tires can be equipped with the optional air-on-the-run system that enables the operator to quickly adjust tire pressures to increase or decrease static loads for optimal surface quality. Versatile Compaction Performance Versatile Compaction Performance due to the flexible ballast system, oscillating front wheels, and optional air-on-the-run. Flexible ballast options include modular and non-modular steel, sand, and water. The modular steel ballast system can be easily added or removed, making it easy to adjust operating weights and match job site requirements. » Learn More Operating Environment The sliding and pivoting operator station rotates 90° to either side for ultimate comfort and control. The new console design includes an LCD display and push button machine controls that simplify operation for an all-around comfortable operating environment. Exceptional Visibility and Control Exceptional Visibility and Control with sliding and rotating operator’s station, LCD display, touch-pad machine functions, and optional Compaction Control. This machine can be equipped with a Cab or ROPS. » Learn More Dual Infrared Temperature Sensors Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range. Pass-Count Mapping Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short. Temperature Mapping Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range. Cat® Compaction Control Cat® Compaction Control keeps the operator informed for higher performance and efficiency. Infrared temperature sensors combined with mapping keep the operator informed of when optimal conditions exist and where compaction has taken place. Temperature Mapping records data for future analysis, while Pass-Count Mapping keeps the operator informed of the number of passes made. » Learn More C4.4 Engine The C4.4 engine meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards and provides 98 kW (133.2 metric hp). ECO-mode Standard ECO-mode provides fuel efficiency and reduces sound levels. Smooth Operating Powertrain Smooth Operating Powertrain with electronic propel control and smooth braking system. The three speed hydrostatic propel system delivers excellent gradeability with speeds up to 19 km/hr (11.8 mph). » Learn More Best Lifetime Value Best Lifetime Value with ECO-mode operation, efficient engine, and durable rubber tires minimize life-time operating costs and maximize profit.