|Throat Force||1405.0 Sh Ton 12509.0 kN||More Less|
|Apex Force||528.0 Sh Ton 4696.0 kN||More Less|
|Tip Force||279.0 Sh Ton 2481.0 kN||More Less|
|Shear Arm Torque||2050000.0 lb ft 2779.0 kN·m||More Less|
|Cycle Time, open||5.0 Seconds 5.0 Seconds||More Less|
|Cycle time, close||5.0 Seconds 5.0 Seconds||More Less|
|Weight, boom-mount||17580.0 lb 8320.0 kg||More Less|
|Weight, stick-mount||18345.0 lb 7975.0 kg||More Less|
|Jaw Opening||34.0 in 879.0 mm||More Less|
|Jaw Depth||35.0 in 903.0 mm||More Less|
|Jaw Width, moving||6.0 in 150.0 mm||More Less|
|Jaw Width, fixed||18.0 in 466.0 mm||More Less|
|Length||168.0 in 4260.0 mm||More Less|
|Height||84.0 in 2121.0 mm||More Less|
|Width||55.0 in 1400.0 mm||More Less|
Piercing tip is bolt-on for rapid maintenance and low operating cost. Tip is fully reversible, giving two uses per set.
Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.
Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.
The four main, side and front knives are fully reversible with four effective cutting edges.
Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.
Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.
Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.