Cat® Dealer Service
Buy any piece of Cat® equipment and also get the full support and commitment of your local Cat Dealer.Contact your local dealer
The Cat® C9.3 ACERT™ Industrial Diesel Power Unit is offered in ratings ranging from 224-298 bkW (300-400 bhp) @ 1800-2200 rpm and meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
|Emissions||U.S. EPA Tier 4 Final, EU Stage IV U.S. EPA Tier 4 Final, EU Stage IV||More Less|
|Engine Configuration||Inline 6, 4-Stroke-Cycle-Diesel Inline 6, 4-Stroke-Cycle-Diesel||More Less|
|Bore||115 mm (4.53 in) 115 mm (4.53 in)||More Less|
|Stroke||149 mm (5.87 in) 149 mm (5.87 in)||More Less|
|Displacement||9.3 L (567.5 in³) 9.3 L (567.5 in³)||More Less|
|Aspiration||Turbocharged Aftercooled (TA) Turbocharged Aftercooled (TA)||More Less|
|Compression Ratio||17:1 17:1||More Less|
|Rotation (from flywheel end)||Counterclockwise Counterclockwise||More Less|
|Cooling System Capacity||64 L (68 qt) 64 L (68 qt)||More Less|
|Lube System (refill)||30 L (31.7 qt) 30 L (31.7 qt)||More Less|
|Length||1845-2042 mm (72.6-80.4 in) 1845-2042 mm (72.6-80.4 in)||More Less|
|Width||1094-1118 mm (43.1-44 in) 1094-1118 mm (43.1-44 in)||More Less|
|Height||1554-1741 mm (61.2- 68.5 in) 1554-1741 mm (61.2- 68.5 in)||More Less|
|Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)||1678-1839 kg (3699-4055 lb) 1678-1839 kg (3699-4055 lb)||More Less|
|Diameter||304.8-330.2 mm (12-13 in) 304.8-330.2 mm (12-13 in)||More Less|
|Width||714.4-870 mm (28.12-34.25 in) 714.4-870 mm (28.12-34.25 in)||More Less|
|Height||392.21-570 mm (15.44-22.4 in) 392.21-570 mm (15.44-22.4 in)||More Less|
|Weight||130-212 kg (287-467 lb) 130-212 kg (287-467 lb)||More Less|
|Volume Capacity||48.4 L (51.1 qt) 48.4 L (51.1 qt)||More Less|
|Length||854 mm (33.6 in) 854 mm (33.6 in)||More Less|
|Width||287 mm (11.3 in) 287 mm (11.3 in)||More Less|
|Height||551 mm (21.7 in) 551 mm (21.7 in)||More Less|
|Weight||19.42 kg (42.8 lb) 19.42 kg (42.8 lb)||More Less|
Meets U.S. EPA Tier 4 Final, EU Stage IV emission standards. U.S. EPA Tier 4 Interim, EU Stage IIIB configurations are also available using EPA or EU Flexibility Process.
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
Simple and efficient turbocharger with balance valve provides optimal air management and improved fuel efficiency.
Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.
Tier 4 Interim or Tier 4 Final, Stage IIIB or Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 15 ppm sulfur, and new oil formulations to support the new technology. Cat® engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil.
Industry leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.
Exceptional power density enables standardization across numerous applications. Available factory-installed configurations: full package, including radiator and Clean Emissions Module (CEM); package with CEM, but no radiator; and package with radiator installed, but CEM shipped loose.
Worldwide service delivers ease of maintenance and simplifies the servicing routine. If applicable, minimum 5000-hour diesel particulate filter (DPF) ash service interval enables low-cost maintenance. Capable of optimal oil change intervals of up to 500-hours, depending on rating, application, operating conditions, and maintenance practices. Engine B10 life up to 10000 hours for Tier 4 Final, Stage IV. The S·O·SSM program is available from your Cat dealer to determine oil change intervals and provide optimal performance.
Every Cat engine is manufactured to stringent standards in order to assure customer satisfaction.
Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Flexible regeneration options maximize uptime.
Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Transparent regeneration maximizes uptime. Aftertreatment life is twice as long as engine rebuild