Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3306B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3306B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3306B gas engine. Ratings: 108-157 bkW (145-211 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar or customer-provided air-fuel ratio control and aftertreatment.
|Minimum Rating||145.0 bhp 108.0 bkW||More Less|
|Maximum Rating||211.0 bhp 157.0 bkW||More Less|
|Emissions||NSPS 2010 NSPS 2010||More Less|
|Displacement||638.0 in3 10.5 L||More Less|
|Compression Ratio||10.5:1 10.5:1||More Less|
|Aspiration||Naturally Aspirated or Turbocharged-Aftercooled Naturally Aspirated or Turbocharged-Aftercooled||More Less|
|Rotation (from flywheel end)||Counterclockwise Counterclockwise||More Less|
|Flywheel and Flywheel Housing||SAE No. 1 SAE No. 1||More Less|
|Flywheel Teeth||156 156||More Less|
|Weight (dry)||2450.0 lb 1111.0 kg||More Less|
|Oil Change Interval||750 hours 750 hours||More Less|
|Ignition, Protection||ADEM A4 ADEM A4||More Less|
|Air/Fuel Ratio Control||ADEM A4 ADEM A4||More Less|
|Stroke||6.0 in 152.0 mm||More Less|
|Bore||4.8 in 121.0 mm||More Less|
- Tough and durable, built on industry standard G3300 platform - Caterpillar supplied air/fuel ratio control and threeway catalyst designed specifically for this engine to provide superior emissions control with NSPS and NonAttainment zone compliance - 0.5 g and 1 g NOx settings available - Integrated operator interface panel, TWC and AFRC reduces hands-on time with the engine - Operator interface panel allows setup and servicing without a laptop - Runs on a broad range of fuels and speeds at any emissions level - Factory installed components with single connection point eases packaging
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Air/Fuel Ratio Control (AFRC) • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection & monitoring
Large variety of factory-installed engine attachments reduces packaging time
GERP is a PC-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site’s altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Catepillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
For all your petroleum power requirements, visit www.catoilandgasinfo.com.