ATC Service Entrance Rated MCCB & Power Breaker Based ATS

< Back

Financing & Insurance
See our Offers
View Product Downloads
Please answer to continue. Select an option to continue. Enter a valid email address.
Yes, I would like to receive future communications from Caterpillar extended enterprise and dealer network

Overview

Cat® Service Entrance Rated (SER) automatic transfer switches (ATS) are designed to provide standby power emergency power to entire installation loads to protect against utility power interruption; yet allow the ATS to be as close as possible to the point of service entrance. By safely and in code compliance, integrating the necessary overcurrent protection and service disconnecting means into the automatic transfer switch, a single installation can be made at the service entrance. This design eliminates the need for a separate upstream fault protection and respective interconnections, which in turn reduces installation space, time, and cost. Breaker-based Service Entrance Rated transfer switches are available from 30A to 5000A.

Technical Summary

Units:
Rating Range 30-5000A 30-5000A Less
Transfer Type Open / Closed / Delayed Open / Closed / Delayed Less
Switch Type Molded Case and Power Breaker Molded Case and Power Breaker Less

Ratings

MCCB 30-1000A 2, 3, or 4 Pole 30-1000A 2, 3, or 4 Pole Less
Fixed Mount Power Breaker 200-3200A 2, 3, 4-Pole 200-3200A 2, 3, 4-Pole Less
Drawout Power Breaker 200-5000A 2, 3, or 4-Pole 200-5000A 2, 3, or 4-Pole Less
System Voltage Application 120-600 Vac 50/60 Hz 120-600 Vac 50/60 Hz Less
Withstand (Power Breaker) Up to 100 kAIC at 600V 3 cycles (Power Breaker) Up to 100 kAIC at 600V 3 cycles Less
Applicable Testing
UL 1008 listed up to 3200A

4000A, and 5000A UL 891 listed

UL 1008 listed up to 3200A

4000A, and 5000A UL 891 listed
Less

Product Features

  • ATC-100 on Residential & Light Commercial MCCB based, ATC-300+ or ATC-800 on MCCB & Power Breaker ATS products
  • UL 1008 service entrance listed (up to 3200A)
  • Service disconnect (both off) capability
  • Integral over current protection
  • Lockout when in disconnected position (only)
  • Service entrance labeled
  • Integrated Design
  • Disconnecting neutral assembly
  • Ground fault protection capability (all ratings)
    (Required by code on rating 480V, and 1000A or higher)
  • Keyed service entrance switch
  • Draw-out type breakers (available on Power Breaker ratings)
  • UL 891 for 4000-5000A
  • Loads protected against extended power loss
  • Quick restoration of the circuit after a trip (versus a fused circuit that requires fuse availability)
  • Trip on a fault prohibits transfer to the emergency source
  • Fused circuit allows switch testing by simulating an actual power failure
  • Lockable disconnect position permits safe downstream maintenance

ATC Service Entrance Rated MCCB & Power Breaker Based ATS Standard Equipment

Controls and Wiring
  • All controls relays and industrial grade relays are totally encapsulated to minimize exposure to dust and dirt. Lugs are 90º rated and all control wire is #16 AWG, type XLPE with a 125º temperature rating.

Enclosure
  • Durable powder-coated steel NEMA 1, 3R or 12 enclosures with three door hinges to ensure proper support of the door and door mounted devices. The hinges have removable hinge pins to facilitate door removal for easy wall mounting or service and are supplied with pad-lockable latches.

ATC Service Entrance Rated MCCB & Power Breaker Based ATS Optional Equipment

Available Options
  • Open, closed or delayed transition
  • Integral overcurrent protection
  • 4-position test switch
  • Multi-meter options available
  • Selectable automatic or non-automatic operation
  • Space heaters
  • Load sequencing contacts
  • Surge suppression
  • Remote communications
  • Seismic Zone 4 Qualified (BOCA, CBC, IBC, UBC and OSHPD)
  • Field selectable, multi ratio, control voltage transformer 50/60 Hz
  • Communications for the ATC-300+ controller via RS-232 or Modbus through an integrated RS-485 port

Optional Delayed Transition includes:
  • Time delay neutral
  • Pre-transfer signal with 1 N.O. and 1 N.C. contacts

Cat® Dealer Service

Buy any piece of Cat® equipment and also get the full support and commitment of your local Cat Dealer.

Contact your local dealer
Financing & Insurance

You can count on Cat Financial to provide the best financial solutions, built just for you.

See our Offers