The Cat® C15 ACERT™ Industrial Power Unit is offered in ratings ranging from 354-433 bkW (475-580 bhp) @ 1800-2100 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
|Emissions||U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards. U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.||More Less|
|Engine Configuration||Inline 6, 4-Stroke-Cycle Diesel Inline 6, 4-Stroke-Cycle Diesel||More Less|
|Bore||137 mm (5.39 in) 137 mm (5.39 in)||More Less|
|Stroke||171 mm (6.73 in) 171 mm (6.73 in)||More Less|
|Displacement||15.2 L (927.6 in³) 15.2 L (927.6 in³)||More Less|
|Aspiration||Turbocharged Aftercooled (TA) Turbocharged Aftercooled (TA)||More Less|
|Compression Ratio||17:1 17:1||More Less|
|Rotation (from flywheel end)||Counterclockwise Counterclockwise||More Less|
|Cooling System Capacity||26.9 L (28.4 qt) 26.9 L (28.4 qt)||More Less|
|Lube System (refill)||38-72 L (40-76 qt) 38-72 L (40-76 qt)||More Less|
|Length||2172-2488 mm (85.5-98 in) 2172-2488 mm (85.5-98 in)||More Less|
|Width||1180-1229 mm (46.5-48.4 in) 1180-1229 mm (46.5-48.4 in)||More Less|
|Height||1912-2006 mm (75.3-79 in) 1912-2006 mm (75.3-79 in)||More Less|
|Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)||2113-2650 kg (4658-5842 lb) 2113-2650 kg (4658-5842 lb)||More Less|
|Diameter||330.2-355.6 mm (13-14 in) 330.2-355.6 mm (13-14 in)||More Less|
|Width||779.8-1112 mm (30.7-43.8in) 779.8-1112 mm (30.7-43.8in)||More Less|
|Height||451.3-654 mm (17.8-25.7 in) 451.3-654 mm (17.8-25.7 in)||More Less|
|Weight||180-268 kg (397-590.8 lb) 180-268 kg (397-590.8 lb)||More Less|
|Volume Capacity||48.4 L (51.1 qt) 48.4 L (51.1 qt)||More Less|
|Length||854 mm (33.6 in) 854 mm (33.6 in)||More Less|
|Width||287 mm (11.3 in) 287 mm (11.3 in)||More Less|
|Height||551 mm (21.7 in) 551 mm (21.7 in)||More Less|
|Weight||19.42 kg (42.8 lb) 19.42 kg (42.8 lb)||More Less|
Meets U.S. EPA Tier 4 Final, EU Stage IV emission standards. Designed to meet proposed EU Stage V emission standards (As of publishing date, Stage V regulations have not been finalized). U.S. EPA Tier 4 Interim, EU Stage IIIB configurations are also available using EPA or EU Flex Provisions.
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.
Simple and efficient turbocharger with balance valve provides optimal air management and improved fuel efficiency.
Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.
Tier 4 Interim or Tier 4 Final, Stage IIIB or Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 10 ppm sulfur (EU) and 15 ppm sulfur (U.S.), and new oil formulations to support the new technology. Cat® engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil.
Industry leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications.
Exceptional power density enables standardization across numerous applications. Available factory-installed configurations: full package, including radiator and Clean Emissions Module (CEM); package with CEM, but no radiator; and package with radiator installed, but CEM shipped loose.
Worldwide service delivers ease of maintenance and simplifies the servicing routine. If applicable, minimum 5000-hour diesel particulate filter (DPF) ash service interval enables low-cost maintenance. Capable of optimal oil change intervals of up to 500-hours, depending on rating, application, operating conditions, and maintenance practices. Engine B10 life up to 10000 hours for Tier 4 Final, Stage IV. The S·O·SSM program is available from your Cat dealer to determine oil change intervals and provide optimal performance.
Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.
Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Flexible regeneration options maximize uptime.
Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Transparent regeneration maximizes uptime. Aftertreatment life is twice as long as engine rebuild