Since its introduction into the market, the MaK long-stroke engine series M 43 has achieved an outstanding position on the marine applications market as an in-line engine in 6, 7, 8 and 9 cylinder versions. More than 650 engines with a total power of more than 6,500 MW have already been sold making the M 43 the market leader in the 5–9 MW power class. All the cylinder configurations have contributed to this market success. More than 90% of the marine engines run on heavy fuel within IMO regulatory limits.
|Speed Range||500-514 rpm 500-514 rpm||More Less|
|Emissions||IMO II IMO II||More Less|
|Aspiration||Turbocharged Turbocharged||More Less|
|Bore||16.93 in 430.0 mm||More Less|
|Stroke||24.02 in 610.0 mm||More Less|
|Rotation (from flywheel end)||Counterclockwise / Clockwise Counterclockwise / Clockwise||More Less|
|Configuration||6,7,8,9 Cylinder 6,7,8,9 Cylinder||More Less|
|Swept Volume||5406.7 in3 88.6 l/cyl.||More Less|
|Minimum Dry Weight||200620.7 lb 91.0 t||More Less|
|Minimum Length||325.6 in 8271.0 mm||More Less|
|Maximum Length||414.5 in 10528.0 mm||More Less|
|Minimum Height||202.0 in 5130.0 mm||More Less|
|Maximum Height||216.6 in 5501.0 mm||More Less|
|Minimum Width||113.3 in 2878.0 mm||More Less|
|Maximum Width||113.3 in 2878.0 mm||More Less|
The M 43 C is an engine with a high safety level, not only inside in terms of component life and availability but also with regard to external peripheral safety. SOLAS regulations are consistently observed. There is an explosion protection cover for the engine block, cladding for the complete fuel system from fuel filter to injection pump, while the exhaust gas and turbine casing, including the exhaust gas outlet casing, is in stainless steel - all part of an overall safety concept for the exhaust gas manifold.
The cast charge air cooler casing forms a secure foundation for the turbocharger. The rigidity of the casing and a 40% increase in the base area for the turbo - charger fastening ensure reliable, low vibration operation.
The governor drive is of simple and robust design. The straight-tooth gearwheel drive is safe and requires no further adjustment. Designed as a complete module.
The media duct system is integrated into the components wherever possible. External pipework has been reduced to a minimum. Maintenance requirements have been cut and work simplified by plug-in pipe connections.
The turning device is of compact construction, safely flanged onto the engine block. An irreversible gear and an engagement unit ensure simple operation and increased operational safety.
The engine block consists of compact nodular cast iron components. There is a large inspection opening for sideways removal of the crankshaft vibration damper. Increased rigidity has been achieved by means of an integrated pump mounting plate. Fewer components mean fewer areas for sealing.
All the engine performance data can be simply inspected on a new control stand arrangement with reliable, analog displays. The monitoring components are arranged centrally, directly above the control stand. This ensures increased operating convenience and simplified maintenance.
Lower valve drive and injection pump drive “Keep it simple” - this design prin ciple is consistently applied in this component. Of modular construction, the component is of simple and robust design and boasts increased operational safety because no ad justment work is necessary.
Cooled injection nozzles The design of the cooled injection nozzle provides a number of advantages, particularly during heavy fuel operation.