Cat® Dealer Service
Buy any piece of Cat® equipment and also get the full support and commitment of your local Cat Dealer.Contact your local dealer
G3600 engines provide a wide range of power options to fit your gas compression application. G3600 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance.Ideal applications for G3600 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3612 gas engine with ratings: 1647-2822 bkW (3550-3785 bhp) @ 1000 rpm. NSPS site compliant capable.
|Minimum Rating||3550.0 bhp 2647.0 bkW||More Less|
|Maximum Rating||3785.0 bhp 2822.0 bkW||More Less|
|Emissions||NSPS Site Compliant Capable NSPS Site Compliant Capable||More Less|
|Displacement||15528.0 in3 254.0 L||More Less|
|Compression Ratio||9.2:1 9.2:1||More Less|
|Aspiration||Turbocharged-Aftercooled Turbocharged-Aftercooled||More Less|
|Rotation (from flywheel end)||Counterclockwise Counterclockwise||More Less|
|Flywheel Teeth||255 255||More Less|
|Weight (dry)||55300.0 lb 25084.0 kg||More Less|
|Oil Change Interval||5000 hours 5000 hours||More Less|
|Ignition, Protection||ADEM™ A3 ADEM™ A3||More Less|
|Stroke||11.8 in 300.0 mm||More Less|
|Bore||11.8 in 300.0 mm||More Less|
- Proven reliability and durability- Ability to burn a wide spectrum of gaseous fuels- Robust diesel strength design prolongs life and lowers owning and operating costs- Broad operating speed range
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010/11 with the use of an oxidation catalyst
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.
- High-strength pan and rails for excellent mounting and stability- Side covers on block allow for inspection of internal components
ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.
Large variety of factory-installed engine attachments reduces packaging time.
Every engine is full-load tested to ensure proper engine performance.
GERP is a PC-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site’s altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
More than 2,200 dealer outletsCat factory-trained dealer technicians service every aspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Over 60 years of natural gas engine productionOwnership of these manufacturing processes enables Caterpillar to produce high quality, dependable products- Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components- Assemble complete engine
For all your petroleum power requirements, visit www.catoilandgas.cat.com.