Producing reliable power from 500 ekW to 600 ekW at 60Hz, our C18 ACERT® diesel generator sets are made to meet your standby and prime applications. Each is designed to ISO 8528-5 transient response requirements and built accept 100 percent rated load in one step. Our C18 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certified. Seismic certification is also available for select models, so you can deliver power despite disturbances. Our integrated control system, including Cat® UPS, ATS and switchgear ensure a consistent power supply and connection to your fleet through on-site and remote monitoring options. We offer a wide range of EMCP 4 control panel options, with a simple screen display, consolidating all your management and diagnostics tools. The EMCP 4.4 controller provides on package paralleling capability, allowing you to use multiple generator sets to power your facility, providing added capacity and redundancy. We've made our generator sets adaptable to your demands with a broad range of accessories and bolt-on system expansion attachments. Find flexible packaging to fit your spatial restrictions and environmental conditions. Even choose UL 2200 and CSA certified package options for added safety.
|Minimum Rating||500 ekW (550 kVA) 500 ekW (550 kVA)||More Less|
|Maximum Rating||600 ekW (700 kVA) 600 ekW (700 kVA)||More Less|
|Voltage||208 to 600 Volts 208 to 600 Volts||More Less|
|Frequency||50 or 60 Hz 50 or 60 Hz||More Less|
|Speed||1500 or 1800 RPM 1500 or 1800 RPM||More Less|
|Emissions/Fuel Strategy||Low Fuel Consumption, EPA ESE Low Fuel Consumption, EPA ESE||More Less|
|Engine Model||C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel||More Less|
|Bore||145 mm (5.71 in) 145 mm (5.71 in)||More Less|
|Displacement||18.13 L (1106.36 in3) 18.13 L (1106.36 in3)||More Less|
|Stroke||183 mm (7.2 in) 183 mm (7.2 in)||More Less|
|Compression Ratio||14.5:1 14.5:1||More Less|
|Aspiration||Air to Air Aftercooled Air to Air Aftercooled||More Less|
|Governor Type||Adem™A4 Adem™A4||More Less|
|Fuel System||Electronic unit injection Electronic unit injection||More Less|
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.
The generator set accepts 100% rated load in one step per NFPA 110 and meets ISO 8528-5 transient response.
Fully prototype tested with certified torsional vibration analysis available
Cat Dealers provide extensive post sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Cat® S•O•SSM program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products.