C7.1 ACERT™

< Atrás

Financiamiento y seguros
Vea nuestras Ofertas
Ver descargas de productos
Responda para continuar. Responda para continuar Introduzca una dirección de correo electrónico válida.
Sí, deseo recibir futuras comunicaciones de Caterpillar y su red de distribuidores

Información general

La Unidad de Energía Industrial C7.1 ACERT™ se ofrece en clasificaciones que van desde 151-205 bkW (202-275 bhp) a 1.800-2.200 rpm. Estas clasificaciones cumplen con los estándares de emisiones Tier 4 Interim de la EPA de EE.UU., Stage IIIB de la Unión Europea, y están diseñadas para cumplir con los estándares de emisiones Tier 4 Final de la EPA de EE.UU. y Stage IV de la Unión Europea.La unidad de energía industrial Cat®, preconfigurada para una amplia gama de aplicaciones para mayor comodidad, es un completo paquete de energía que contiene un radiador, un volante, un alternador y cableado de alternador completamente premontado para una instalación rápida y sencilla en una serie de aplicaciones OEM, de cliente y de empaquetador. Estas unidades eficientes en el consumo de combustible están listas para la irrigación, el uso industrial, la minería y otras aplicaciones de bombas.

Power Rating

Unidades:
Minimum Power 202.0 bhp 151.0 bkW Less
Maximum Power 275.0 bhp 205.0 bkW Less
Frequency 1.800-2.200 rpm 1.800-2.200 rpm Less

Emission Standards

Emissions Norma Tier 4 Interim de la EPA de EE.UU., o Tier 4 Final de la EPA de EE.UU., Stage IIIB o Stage IV de la Unión Europea Norma Tier 4 Interim de la EPA de EE.UU., o Tier 4 Final de la EPA de EE.UU., Stage IIIB o Stage IV de la Unión Europea Less

General

Engine Configuration Diesel con ciclo de 4 tiempos, 6 en línea Diesel con ciclo de 4 tiempos, 6 en línea Less
Bore 105 mm (4,13") 105 mm (4,13") Less
Stroke 135 mm (5,3") 135 mm (5,3") Less
Displacement 7,01 L (427,7 pulg³) 7,01 L (427,7 pulg³) Less
Aspiration Serie con turbocompresor y posenfriador (TTA) Serie con turbocompresor y posenfriador (TTA) Less
Compression Ratio 16.5:1 16.5:1 Less
Rotation (from flywheel end) Hacia la izquierda Hacia la izquierda Less
Cooling System Capacity 15,2 L (16 qt) 15,2 L (16 qt) Less
Lube System (refill) 13-16 L (13,7-16,9 qt) 13-16 L (13,7-16,9 qt) Less

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length 1.804-1.902 mm (71-74,9") 1.804-1.902 mm (71-74,9") Less
Width 916 mm (36,06") 916 mm (36,06") Less
Height 1.474-1.617 mm (58,03-63,7") 1.474-1.617 mm (58,03-63,7") Less
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 1.000-1.200 kg (2.204-2.645,5 lb) 1.000-1.200 kg (2.204-2.645,5 lb) Less

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Diameter 287-337,8 mm (11,3-13,3") 287-337,8 mm (11,3-13,3") Less
Width 714,4 mm (28,1") 714,4 mm (28,1") Less
Height 618,5-643,9 mm (24,3-25,3") 618,5-643,9 mm (24,3-25,3") Less
Weight 124-134 kg (273,4-295,4 lb) 124-134 kg (273,4-295,4 lb) Less

Emissions

Designed to meet U.S. EPA Tier 4 Interim or U.S. EPA Tier 4 Final, EU Stage IIIB or EU Stage IV emission standards.

Reliable, Quiet and Durable Power

World-class manufacturing capability and processescoupled with proven core engine designs assurereliability, quiet operation, and many hours ofproductive life.

High Performance

Series turbocharging with smart wastegate available on specific ratings for fast response, high power, and increased torque.

Fuel Efficiency

Fuel consumption optimized to match operating cycles of a wide range of equipment and applications. No additional fluids or additives are required, which lowers operating costs.

Fuel & Oil

Los motores Tier 4 Interim o Tier 4 Final, Stage IIIB o Stage IV requieren combustible diesel ultra bajo en azufre (ULSD, Ultra Low Sulfur Diesel) que contenga un máximo de 15 ppm de azufre y nuevas formulaciones de aceite que respalden la nueva tecnología. Los motores Cat® están diseñados para adaptarse al biocombustible B20. Su distribuidor Cat puede entregarle más información sobre el combustible y el aceite.

Broad Application Range

Industry leading range of factory configurable ratingsand options for agricultural, material handling,construction, mining, aircraft ground support, and otherindustrial applications.

Package Size

Exceptional power density enables standardization across numerous applications. Multiple installation options minimize total package size. Ideal for equipment with narrow engine compartments.

Low Cost Maintenance

Worldwide service delivers ease of maintenance and simplifies the servicing routine. Hydraulic tappets, multi-vee belts, minimum 5000-hour diesel particulate filter (DPF) ash service interval and 500-hour oil change intervals enable low-cost maintenance. Many service items have a choice of location on either side of the engine to enable choice of service access. The S·O·SSM program is available from your Cat dealer to determine oil change intervals and provide optimal performance.

Calidad

Cada motor Cat está fabricado para cumplir con estándares estrictos para garantizar la satisfacción del cliente.

Respaldo al producto de clase mundial ofrecido a través de la red global de distribuidores Cat

  • Mantenimiento programado, incluido muestra S•O•SSM
  • Convenios de respaldo al Cliente (Customer Support Agreements, CSA)
  • Cobertura de servicio extendido (Extended Service Coverage, ESC) de Cat
  • Red de servicio superior del distribuidor
  • Red de servicio del distribuidor extendido a través delprograma de Distribuidor de servicio industrial (Industrial Service Distributor, ISD) de Cat

Tier 4 Interim, Stage IIIB Aftertreatment Features


Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration.


Mounting. Remote installation options provide OEM flexibility for many applications.
Service. Minimum 5000 hour DPF ash service interval.

Tier 4 Final, Stage IV Aftertreatment Features


Regeneration. Passive regeneration completely transparent to the operator.


Mounting. Extensive range of inlets and outlets, as well as remote and on-engine installations, provide flexibility for many installations.
Service. Service-free DPF for the emissions life of the engine.

C7.1 ACERT™ Equipos estándar

Admisión de aire
  • Standard air cleaners

Sistema de control
  • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
  • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines

Sistema de enfriamiento
  • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
  • 50:50 water glycol mix
  • Guidance on cooling system design available through your dealer to ensure equipment reliability

Volantes y caja del volante
  • Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations

Sistema de combustible
  • Electronic high pressure common rail
  • ACERT™ Technology
  • Innovative filter design to ensure maximum protection of the engine

Sistema de lubricación
  • Amplia variedad de sumideros para diferentes aplicaciones

Toma de fuerza
  • SAE A or SAE B flanges on left-hand side. Right-hand side twin PTO also available. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.

Generalidades
  • Paint: Cat yellow, with optional colors available at request

U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
  • Cat Regeneration System
  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • NOx Reduction System (NRS)
  • 3" flex pipe connection kit with straight, 45°, and 90° options for flexibility

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • NOx Reduction System (NRS)
  • Selective Catalytic Reduction (SCR)
  • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Cat® Dealer Service

Compre las piezas que necesite para sus equipos Cat® y obtenga todo el apoyo y compromiso de su distribuidor Cat local.

Póngase en contacto con su distribuidor local
Financiamiento y seguros

Usted puede contar con Cat Financial para proporcionar las mejores soluciones financieras, construidas sólo para usted.

Vea nuestras Ofertas
Engine Warranty Registration

We are committed to providing our customers with the finest products and product support available in the market today.

Register Today