Financiamiento y seguros
Vea nuestras Ofertas
Ver las descargas de productos
Por favor, conteste para continuar. Responda para continuar Introduzca una dirección de correo electrónico válida.
S�, en el futuro deseo recibir comunicaciones de la empresa extendida y la red de distribuidores de Caterpillar.

Generalidades

La Unidad de Energía Industrial Cat® C13 ACERT™ se ofrece en clasificaciones que van desde 287-388 bkW (385-520 bhp) a 1.800-2.100 rpm. Estas clasificaciones cumplen con los estándares de emisiones Tier 4 Interim de la EPA de EE.UU., Stage IIIB de la Unión Europea, y están diseñadas para cumplir con los estándares de emisiones Tier 4 Final de la EPA de EE.UU. y Stage IV de la Unión Europea.La unidad de energía industrial Cat®, preconfigurada para una amplia gama de aplicaciones para mayor comodidad, es un completo paquete de energía que contiene un radiador, un volante, un alternador y cableado de alternador completamente premontado para una instalación rápida y sencilla en una serie de aplicaciones OEM, de cliente y de empaquetador. Estas unidades eficientes en el consumo de combustible están listas para la irrigación, el uso industrial, la minería y otras aplicaciones de bombas.

Power Rating

Unidades:
Minimum Power 385.0 bhp 287.0 bkW Less
Maximum Power 520.0 bhp 388.0 bkW Less
Frequency 1.800-2.100 rpm 1.800-2.100 rpm Less

Emission Standards

Emissions Norma Tier 4 Interim de la EPA de EE.UU., o Tier 4 Final de la EPA de EE.UU., Stage IIIB o Stage IV de la Unión Europea Norma Tier 4 Interim de la EPA de EE.UU., o Tier 4 Final de la EPA de EE.UU., Stage IIIB o Stage IV de la Unión Europea Less

General

Engine Configuration Diesel con ciclo de 4 tiempos, 6 en línea Diesel con ciclo de 4 tiempos, 6 en línea Less
Bore 130 mm (5,12") 130 mm (5,12") Less
Stroke 157 mm (6,18") 157 mm (6,18") Less
Displacement 12,5 L (762,8 pulg³) 12,5 L (762,8 pulg³) Less
Aspiration Con turbocompresor y posenfriador (TA) Con turbocompresor y posenfriador (TA) Less
Compression Ratio 17:1 17:1 Less
Rotation (from flywheel end) Hacia la izquierda Hacia la izquierda Less
Cooling System Capacity 60,7 L (64.2 qt) 60,7 L (64.2 qt) Less
Lube System (refill) 34 L (35,9 qt) 34 L (35,9 qt) Less

Power Unit Dimensions (Approximate. Final dimensions dependent on selected options)

Length 2.085-2.122 mm (82,1-83,5") 2.085-2.122 mm (82,1-83,5") Less
Width 1.157-1.247 mm (45,6-49") 1.157-1.247 mm (45,6-49") Less
Height 1.928-2.082 mm (75,9-81,97") 1.928-2.082 mm (75,9-81,97") Less
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C) 2.085-2.304 kg (4.596-5.080 lb) 2.085-2.304 kg (4.596-5.080 lb) Less

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

Diameter 330,2 mm (13") 330,2 mm (13") Less
Width 779,8-1.069 mm (30,7-42,1") 779,8-1.069 mm (30,7-42,1") Less
Height 451,3-654 mm (17,8-25,7") 451,3-654 mm (17,8-25,7") Less
Weight 248-259 kg (547-571 lb) 248-259 kg (547-571 lb) Less

PETU Dimensions (Tier 4 Final, Stage IV Only)

Volume Capacity 48,4 L (51,1 qt) 48,4 L (51,1 qt) Less
Length 854 mm (33,6") 854 mm (33,6") Less
Width 287 mm (11,3") 287 mm (11,3") Less
Height 551 mm (21,7") 551 mm (21,7") Less
Weight 19,42 mm (42,8 lb) 19,42 mm (42,8 lb) Less

Emissions

Designed to meet U.S. EPA Tier 4 Interim or U.S. EPA Tier 4 Final, EU Stage IIIB or EU Stage IV emission standards.

Reliable, Quiet and Durable Power

World-class manufacturing capability and processescoupled with proven core engine designs assurereliability, quiet operation, and many hours ofproductive life.

High Performance

Simple and efficient turbocharger with balance valve provides optimal air management and improved fuel efficiency.

Fuel Efficiency

Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs.

Fuel & Oil

Los motores Tier 4 Interim o Tier 4 Final, Stage IIIB o Stage IV requieren combustible diesel ultra bajo en azufre (ULSD, Ultra Low Sulfur Diesel) que contenga un máximo de 15 ppm de azufre y nuevas formulaciones de aceite que respalden la nueva tecnología. Los motores Cat® están diseñados para adaptarse al biocombustible B20. Su distribuidor Cat puede entregarle más información sobre el combustible y el aceite.

Broad Application Range

Industry leading range of factory configurable ratingsand options for agricultural, material handling,construction, mining, aircraft ground support, and otherindustrial applications.

Package

Exceptional power density enables standardization across numerous applications. Available factory-installed configurations: full package, including radiator and Clean Emissions Module (CEM); package with CEM, but no radiator; and package with radiator installed, but CEM shipped loose.

Low Cost Maintenance

Worldwide service delivers ease of maintenance and simplifies the servicing routine. If applicable, minimum 5000-hour diesel particulate filter (DPF) ash service interval enables low-cost maintenance. Capable of optimal oil change intervals of up to 500-hours, depending on rating, application, operating conditions, and maintenance practices. Engine B10 life up to 10000 hours for Tier 4 Final, Stage IV. The S·O·SSM program is available from your Cat dealer to determine oil change intervals and provide optimal performance.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.

World-class Product Support Offered Through Global Cat Dealer Network

  • Mantenimiento programado, incluida una muestra S•O•SSM< /li>
  • Convenios de respaldo al cliente (CSA, Customer Support Agreements)< /li>
  • Cobertura de servicio extendido (ESC, Extended Service Coverage) Caterpillar
  • Red de servicio superior del distribuidor
  • Red de servicio extendido del distribuidor a través del programaDistribuidor de servicio industrial (ISD, Industrial Service Distributor) Cat

Tier 4 Interim, Stage IIIB Aftertreatment Features


Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Flexible regeneration options maximize uptime.


Mounting. Remote installation options provide OEM flexibility for many applications, including horizontal and vertical mounting, with and without muffler.
Service. Minimum 5000 hour DPF ash service interval.

Tier 4 Final, Stage IV Aftertreatment Features


Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Transparent regeneration maximizes uptime. Aftertreatment life is twice as long as engine rebuild


Mounting. Industrial power units have standard horizontal mounting.
Service. Minimum 5000-hour diesel particulate filter ash service interval. PETU filter service is 5000 hours.

C13 ACERT™ Equipos estándar

Sistema de admisión de aire
  • Turbocharged
  • Air-to-Air Aftercooled
  • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)

Sistema de control
  • Electronic control system
  • Over-foam wiring harness
  • Automatic altitude compensation
  • Power compensated for fuel temperature
  • Configurable software features
  • Engine monitoring system SAE J1939 broadcast and control
  • Integrated Electronic Control Unit (ECU)
  • Remote fan control

Sistema de enfriamiento
  • Vertical or RH thermostat outlet
  • Centrifugal water pump
  • Guidance on cooling system design available through your dealer to ensure equipment reliability

Volantes y caja del volante
  • SAE No. 1 flywheel housing
  • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).

Sistema de combustible
  • MEUI injection
  • Primary fuel filter
  • Secondary fuel filters
  • Fuel transfer pump
  • Electronic fuel priming

Sistema de lubricación
  • Open crankcase ventilation system
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Oil dipstick
  • Gear driven oil pump
  • Choice of front, rear or center sumps
  • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)

Toma de fuerza (Power Take Off, PTO)
  • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

Generalidades
  • Paint: Cat yellow

U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
  • Cat Regeneration System
  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • NOx Reduction System (NRS)
  • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
  • Available in 12 volt or 24 volt systems

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
  • Cat Regeneration System
  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • Aftertreatment Electronic Control Unit (ECU)
  • NOx Reduction System (NRS)
  • Pump Electronic Control Unit (PETU)
  • Selective Catalytic Reduction (SCR)
  • Available in 12V or 24V systems

Cat® Dealer Service

Compre las piezas que necesite para sus equipos Cat® y obtenga todo el apoyo y compromiso de su distribuidor Cat local.

Póngase en contacto con su distribuidor local
Financiamiento y seguros

Usted puede contar con Cat Financial para proporcionar las mejores soluciones financieras, construidas sólo para usted.

Vea nuestras Ofertas
Engine Warranty Registration

We are committed to providing our customers with the finest products and product support available in the market today.

Register Today