< Atrás

Financiamiento y seguros
Vea nuestras Ofertas
Ver descargas de productos
Responda para continuar. Responda para continuar Introduzca una dirección de correo electrónico válida.
Sí, en el futuro deseo recibir comunicaciones (p. ej., por correo electrónico) de la empresa extendida y la red de distribuidores de Caterpillar.

Información general

El Motor Diesel Industrial Cat® C1.5 se ofrece en clasificaciones que van desde 20,9-30 bkW (28-40,2 bhp) a 2.200-3.000 rpm. Estas clasificaciones cumplen con los estándares de emisiones Stage IIIA de la Unión Europea.Las aplicaciones que usan los motores C1.5 incluyen: tractores agrícolas, cosechadoras, apoyo en tierra para aeronaves, plataformas de perforación, cortadores, trituradores, compactadores, rodillos, compresores, construcción, riego, bombas, césped, paisajismo, movimiento de tierras móvil, pavimentación, zanjadoras, minería subterránea y manipulación de materiales.

Power Rating

Unidades:
Minimum Power 28.0 bhp 20.9 bkW Less
Maximum Power 40.2 bhp 30.0 bkW Less
Frequency 2200-3000 rpm 2200-3000 rpm Less

Emission Standards

Emissions U.S. EPA Tier 4 Interim Equivalent U.S. EPA Tier 4 Interim Equivalent Less

General

Engine Configuration Inline 3, 4-Stroke-Cycle Diesel Inline 3, 4-Stroke-Cycle Diesel Less
Bore 84 mm (3.3 in) 84 mm (3.3 in) Less
Stroke 90 mm (3.5 in) 90 mm (3.5 in) Less
Displacement 1.496 L (91 in³) 1.496 L (91 in³) Less
Aspiration Naturally Aspirated (NA) or Turbocharged (T) Naturally Aspirated (NA) or Turbocharged (T) Less
Compression Ratio 22.5:1 22.5:1 Less
Combustion System Indirect Injection Indirect Injection Less
Rotation (from flywheel end) Counterclockwise Counterclockwise Less
Lube System (refill) 6 L (6.3 qt) 6 L (6.3 qt) Less

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length 572 mm (22.5 in) 572 mm (22.5 in) Less
Width 453-512 mm (17.8-20.2 in) 453-512 mm (17.8-20.2 in) Less
Height 643 mm (25.3 in) 643 mm (25.3 in) Less
Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 149-156.5 kg (328-345 lb) 149-156.5 kg (328-345 lb) Less

World-class Product Support Offered Through Global Cat Dealer Network

  • Mantenimiento programado, incluida una muestra S•O•SSM< /li>
  • Convenios de respaldo al cliente (CSA, Customer Support Agreements)< /li>
  • Cobertura de servicio extendido (ESC, Extended Service Coverage) Caterpillar
  • Red de servicio superior del distribuidor
  • Red de servicio extendido del distribuidor a través del programaDistribuidor de servicio industrial (ISD, Industrial Service Distributor) Cat

C1.5 Equipos estándar

Air Inlet System
  • Inlet manifold with choice of inlets.

Control System
  • Alternator 12 volt 65 amp
  • Starter motor 12 volt
  • Glow plug starting aid
  • Tier 4 Final: Alternator 12V 85 amp

Cooling System
  • Belt-driven coolant pump
  • Coolant temperature switch
  • Choice of cooling fans

Flywheel & Flywheel Housing
  • Naturally Aspirated: SAE No. 7 1/2 flywheel
  • Turbocharged: SAE No. 6 1/2 or SAE No. 7 1/2 flywheel
  • EPA Tier 4 Final Turbocharged: SAE No. 7 1/2 flywheel
  • Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
  • Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing
  • Tier 4 Final Turbocharged: Choice of SAE No. 4 or SAE No. 5 or standard backplate flywheel housing

Fuel System
  • Fuel injection pump
  • Spin-on fuel filter
  • Electronic Shut-off Solenoid (ESOS)

Lube System
  • Alternative oil fillers
  • Spin-on lube oil filter
  • Lube oil pressure switch
  • Lube oil sump

General
  • Cast iron, engine block
  • Cast iron exhaust manifold--side outlet
  • Cold start capability to -20° C (-4° F)
  • Gradeability 35° continuous
  • Paint: Caterpillar yellow, with optional colors available at request