D3K2 Tier 4 Final

< Back

Financing & Insurance Offers
View Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Traction control, power pitch and improved blade control make the K2 machines even more productive, precise and efficient. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. All three models meet U.S. EPA Tier 4 Final/EU Stage IV emissions requirements. From the first cut to finish grade, the K2 Family sets the standard.

Engine

Units:
Engine Model Cat C4.4 Cat C4.4 Less
Power - Net 80.0 HP 59.7 kW Less
Displacement 269.0 in³ 4.4 l Less
Bore 4.13 in 105.0 mm Less
Stroke 5.0 in 127.0 mm Less
Rated Net Power - 2,200 rpm - SAE J1349 80.0 HP 59.7 kW Less
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80.0 HP 59.7 kW Less
Note Engine meets U.S. EPA Tier 4 Final emission standards. Engine meets U.S. EPA Tier 4 Final emission standards. Less

Transmission

Drive Pumps 1 1 Less
Maximum Travel Speed - Reverse 6.2 mile/h 10.0 km/h Less
Track Motors 2 2 Less
Relief Valve Settings 7033.0 psi 48500.0 kPa Less
Maximum Travel Speed - Forward 5.6 mile/h 9.0 km/h Less

Weights

Operating Weight - XL 17465.0 lb 7922.0 kg Less
Operating Weight - LGP 18442.0 lb 8365.0 kg Less
Operating Weight - LGP, 762 mm/30 in 18896.0 lb 8571.0 kg Less
Note (1) Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. Specifications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. Less
Note (2) Enclosed cab adds 225 kg (495 lb). Enclosed cab adds 225 kg (495 lb). Less

Service Refill Capacities

Cooling System 5.92 gal (US) 22.4 l Less
Final Drive - Each - LGP 2.6 gal (US) 10.0 l Less
Transmission - Hydraulic Tank 15.7 gal (US) 59.5 l Less
Crankcase - With Filter 2.91 gal (US) 11.0 l Less
Final Drive - Each - XL 2.6 gal (US) 10.0 l Less
Fuel Tank 51.5 gal (US) 195.0 l Less
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) 19.0 l Less

Hydraulic Controls

Pump Output 17.7 gal/min 68.0 l/min Less
Relief Valve Settings 2988.0 psi 20600.0 kPa Less

Undercarriage

Length - Track on Ground - LGP 89.0 in 2248.0 mm Less
Track Gauge - LGP 68.0 in 1725.0 mm Less
Ground Contact Area - LGP, 762 mm (30 in) 5340.0 in² 34452.0 cm² Less
Ground Contact Area - LGP 4425.0 in² 28550.0 cm² Less
Length - Track on Ground - XL 89.0 in 2248.0 mm Less
Shoe Width - XL 16.0 in 406.0 mm Less
Track Gauge - XL 59.0 in 1495.0 mm Less
Shoe Width - LGP 25.0 in 635.0 mm Less
Ground Pressure - XL 6.2 psi 42.8 kPa Less
Ground Pressure - LGP 4.2 psi 30.0 kPa Less
Ground Pressure - LGP, 762 mm (30 in) 3.6 psi 24.8 kPa Less
Track Gauge - LGP, 762 mm (30 in) 73.0 in 1860.0 mm Less
Ground Contact Area - XL 2829.0 in² 18254.0 cm² Less
Shoe Width - LGP, 762 mm (30 in) 30.0 in 762.0 mm Less
Number of Shoes - Each Side - SystemOne Undercarriage 38 38 Less
Length - Track on Ground - LGP, 762 mm (30 in) 89.0 in 2248.0 mm Less
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 43 Less
Number of Rollers - Each Side 6 6 Less

Ripper

Type Parallelogram Parallelogram Less
Number of Shanks 3 3 Less
Height 6.5 in 165.0 mm Less
Weight 1222.0 lb 554.0 kg Less
Maximum Ground Clearance Under Tip 17.6 in 448.0 mm Less
Maximum Reach - Ground Line 30.2 in 766.0 mm Less
Overall Width 67.3 in 1710.0 mm Less
Maximum Digging Depth 13.3 in 337.5 mm Less

Winch

Weight 1345.0 lb 610.0 kg Less
Winch Drive Hydrostatic Hydrostatic Less
Control Hydraulic Hydraulic Less
Speed Variable Variable Less
Maximum Line Pull - Full Drum 25000.0 lb 11340.0 kg Less
Throat Clearance 6.75 in 171.5 mm Less
Maximum Line Pull - Bare Drum 40000.0 lb 18144.0 kg Less
Overall Width 29.2 in 741.0 mm Less
Drum Capacity - Recommended Cable 371.0 ft 113.0 m Less
Rope Diameter - Recommended 0.63 in 16.0 mm Less
Rope Diameter - Optional 0.75 in 19.0 mm Less
Drum Width 10.8 in 274.0 mm Less
Maximum Line Speed - Bare Drum 131.0 ft/min 40.0 m/min Less
Winch Length 27.76 in 705.0 mm Less
Drum Diameter 10.0 in 254.0 mm Less
Maximum Line Speed - Full Drum 207.0 ft/min 63.0 m/min Less
Drum Capacity - Optional Cable 256.0 ft 78.0 m Less

Dimensions

Length - Basic Tractor - Without Blade - XL 128.9 in 3275.0 mm Less
BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ 1.66 m³ Less
BLADE: Blade Capacity (SAE) - XL 1.99 yd³ 1.52 m³ Less
Track Gauge - XL 58.9 in 1495.0 mm Less
BLADE: Digging Depth - LGP 22.5 in 573.0 mm Less
BLADE: Digging Depth - XL 22.5 in 573.0 mm Less
BLADE: Maximum Angle (either side) - XL 25° 25° Less
Track Gauge - LGP, 762 mm (30 in) 73.0 in 1860.0 mm Less
BLADE: Blade Width at Maximum Angle - LGP 113.1 in 2874.0 mm Less
BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58° 52° to 58° Less
BLADE: Blade Lift Height - LGP 28.7 in 730.0 mm Less
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58° 52° to 58° Less
BLADE: Blade Height - Intermediate 33.9 in 860.0 mm Less
BLADE: Blade Width - LGP 124.0 in 3149.0 mm Less
BLADE: Blade Lift Height - Intermediate 29.3 in 743.0 mm Less
Ground Clearance - LGP 13.0 in 332.0 mm Less
BLADE: Blade Capacity (SAE) - Intermediate 1.96 yd³ 1.5 m³ Less
BLADE: Blade Lift Height - XL 28.7 in 730.0 mm Less
Tractor Height - LGP, 762 mm (30 in) 108.8 in 2763.0 mm Less
BLADE: Maximum Angle (either side) - Intermediate 25° 25° Less
BLADE: Digging Depth - Intermediate 22.5 in 573.0 mm Less
BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in 2669.0 mm Less
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in) 94.9 in 2411.0 mm Less
BLADE: Blade Width - XL 104.2 in 2646.0 mm Less
Width - Tractor - Standard Shoes - No Blade - LGP 92.9 in 2360.0 mm Less
BLADE: Blade Width - Intermediate 115.0 in 2921.0 mm Less
Tractor Height - LGP 108.8 in 2763.0 mm Less
BLADE: Maximum Tilt - XL 14.5 in 368.0 mm Less
Length - Basic Tractor - Without Blade - LGP 128.9 in 3275.0 mm Less
Overall Length - With Blade - XL 168.0 in 4266.0 mm Less
Overall Length - With Blade - LGP, 762 mm (30 in) 167.6 in 4255.0 mm Less
Overall Length - With Blade - LGP 167.6 in 4255.0 mm Less
BLADE: Blade Width at Maximum Angle - XL 95.2 in 2417.0 mm Less
Tractor Height - XL 108.8 in 2763.0 mm Less
Ground Clearance - XL 13.0 in 332.0 mm Less
BLADE: Maximum Tilt - LGP 17.2 in 438.0 mm Less
BLADE: Blade Height - LGP 33.8 in 860.0 mm Less
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in) 128.9 in 3275.0 mm Less
BLADE: Maximum Tilt - Intermediate 17.7 in 448.0 mm Less
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° 52° to 58° Less
Width - Tractor - Standard Shoes - No Blade - XL 74.8 in 1901.0 mm Less
BLADE: Maximum Angle (either side) - LGP 25° 25° Less
Ground Clearance - LGP, 762 mm (30 in) 13.0 in 332.0 mm Less
BLADE: Blade Height - XL 35.8 in 910.0 mm Less
Track Gauge - LGP 67.9 in 1725.0 mm Less

Cab

Sound Levels - ISO 6396:2008 79.0 dB(A) 79.0 dB(A) Less
Sound Levels - SAE J1166 FEB2008 79.0 dB(A) 79.0 dB(A) Less
FOPS ISO 3449:2005 Level II ISO 3449:2005 Level II Less
ROPS ISO 3471:2008 ISO 3471:2008 Less

Grade with ease and accuracy

The D3K2 Dozer offers numerous grade control features to enable operators to grade with increased accuracy. Features such as Cat® GRADE with 3D, Cat GRADE with Slope Assist, AccuGrade and Slope Indicate allows for a smooth finish grade for both new and experienced operators every time.

Choices for any Application

The family of Small Dozers offers a choice of both track frames and undercarriages.

Track frames are available in two configurations:

• XL undercarriage - where flotation and side stability are not extreme
• LGP undercarriage - for soft underfoot conditions where additional flotation is required

Undercarriages are available in two configurations:

• Sealed and Lubricated Track (SALT) Undercarriage
– Track is not bushing limited
– May require pin and bushing turn

• SystemOne™ Undercarriage
– Track is bushing limited
– Bushing rotates continuously
– Does not require bushing turn
– Designed to maximize the life of all undercarriage components

All Day Comfort

The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
• Quiet environment
• Wide door openings for easy entry/exit
• Dash mounted air vents for improved air circulation
• Air suspension seat for a more comfortable ride
• Air conditioning for greater comfort in all climates
• New ventilated seat (optional)
• Heated seat and heated control handles (optional)

Easy Serviceability Access

Long service intervals and easy maintenance keep the machine up and running to lower your owning and operating costs.
• Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
• Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
• Easy ground level access to hydraulic filters located in the left rear service compartment

D3K2 Tier 4 Final Standard Equipment

ELECTRICAL
  • Alternator, 12 volt, 120 Amp, heavy duty brushless
  • Alarm, backup
  • Batteries (2), heavy duty, maintenance free, 1,500 CCA
  • Diagnostic connector
  • Horn, electric
  • Lights, halogen, 2 front and 2 rear
  • Starter, electric, 12 volt

OPERATOR STATION
  • ROPS/FOPS canopy
  • Seat, air suspended, cloth or vinyl
  • Seatbelt, retractable 76 mm (3 in)
  • Foot pads, dash
  • Electronic Monitoring System with:
    – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level
    – Travel speed limiter, electronic
    – Engine RPM and gear display
    – Hour meter, electric
    – Engine air cleaner service indicator, electronic
    – Water-in-fuel indicator, electronic
  • Slope Indicate
  • Throttle switch, rotary
  • Eco mode
  • Controls, seat mounted, fore/aft adjustment
  • Armrests, adjustable
  • Mirror, rearview, inside
  • Single pedal combining deceleration and braking functions
  • Independent forward/reverse speed settings
  • Power port, 12 volt
  • Coat hook
  • Storage compartment
  • Cup holder
  • Floor mat, rubber, heavy duty

HYDRAULICS
  • Hydraulics, 3 valve
  • Load sensing hydraulics
  • Single lever, three function control
  • Hydraulic pump and oil
  • Stable blade control

POWER TRAIN
  • Cat® C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final certified with aftertreatment
  • Aftercooler, Air-to-Air (ATAAC)
  • Aluminum bar plate cooling system (radiator, power train)
  • Air cleaner with precleaner, automatic dust ejection and under-hood intake
  • Dual path, closed-loop hydrostatic transmission
  • Electric fuel priming pump
  • Fuel/water separator
  • Automatic Traction Control

UNDERCARRIAGE
  • SALT Undercarriage
  • 6 roller track frame
  • Track rollers, lifetime lubricated
  • Carrier rollers
  • Track adjusters, hydraulic
  • Guards, front/rear guiding
  • Master link

OTHER STANDARD EQUIPMENT
  • Cat Product Link™ PLE732 Satellite/PLE742 Cellular
  • C-Frame, VPAT, hydraulic cylinders and lines
  • Lockable engine enclosures
  • Front pull device
  • Rigid drawbar
  • Ecology drains (engine, power train and implement oil and engine coolant)
  • Scheduled oil sampling ports (engine, power train implement oil)
  • Vandalism protection
  • Heavy duty crankcase guard

ANTIFREEZE
  • Extended life coolant, –37° C (–35° F)

D3K2 Tier 4 Final Optional Equipment

ELECTRICAL
  • Integrated four front halogen lights, two rear halogen lights

POWER TRAIN
  • Drive, auxiliary
  • Installation, winch

UNDERCARRIAGE
  • Track Pairs, XL:
    – Track, 406 mm (16 in) MS SystemOne
  • Track Pairs, LGP:
    – Track, 635 mm (25 in) MS SystemOne
    – Track, 762 mm (30 in) MS SystemOne

OPERATOR STATION
  • Cab with air conditioning
  • Cab, polycarbonate windows and air conditioning
  • Seat, air suspension, choice of:
    – Vinyl, heated seat with heated controls
    – Cloth, heated seat with heated controls
    – Cloth, heated and ventilated seat with heated controls
  • Radio, AM/FM, Bluetooth
  • Sound suppression

HYDRAULICS
  • Hydraulics, 4 valve for use with ripper
  • Hydraulics, 4 valve for use with winch

GUARDS
  • Guard, rear, heavy duty
  • Grill, radiator, heavy duty
  • Guard, track guiding, center
  • Guard, track roller, full length
  • Screen, rear, cab
  • Screen, side, cab
  • Screen, rear, canopy
  • Screen, front and doors, canopy
  • Sweeps, front
  • Sweeps, rear

BLADES
  • VPAT XL blade
  • VPAT LGP blade
  • VPAT Intermediate blade

REAR ATTACHMENTS
  • Drawbar, towing
  • Mounting, winch
  • Ripper, parallelogram, includes three shanks and teeth

REAR ATTACHMENT CONTROL
  • Control, ripper
  • Control, winch
  • Control, ripper and winch

MACHINE CONTROL AND GUIDANCE
  • Cat GRADE with 3D
  • Cat GRADE with Slope Assist
  • Power Pitch blade control

STARTING AIDS
  • Heater, engine, coolant, 120 volt
  • Starting aid, ether

OTHER ATTACHMENTS
  • Machine Security System

ANTIFREEZE
  • Extended life coolant, –50° C (–58° F)

FIELD INSTALLED ATTACHMENT
  • Winch, hydraulic, high performance, 40 m/min (131 ft/min) line speed
  • Winch, hydraulic retrieval, 15 m/min (50 ft/min) line speed