10% more swing torque

Experience faster cycle times and smoother, more predictable performance.

Up To 2X more structural durability

Do hard, heavy work with reinforced booms, sticks, and upper and lower frames.

Up To 20% less maintenance cost

Save money and time using less oil and better filters with extended service intervals.

Large Excavators 374 - Tier 4

Request A Price Find Dealer

Key Specs

Net Power - ISO 9249: 484 HP; 361 kW

Operating Weight: 158200 lb; 71700 kg

Maximum Digging Depth: 28.1 ft; 8570 mm

374 - Tier 4
Change model

Overview

High Production and Durability with Low Maintenance

High production, more durability, and less maintenance are what the 374 Next Generation Excavator will bring to your business.

Benefits

10% more swing torque

Experience faster cycle times and smoother, more predictable performance.

Up To 2X more structural durability

Do hard, heavy work with reinforced booms, sticks, and upper and lower frames.

Up To 20% less maintenance cost

Save money and time using less oil and better filters with extended service intervals.

Features At A Glance

Latest Features

Optional Cat Command remote control allows you to work outside of the cab to help avoid potential hazards.
Optional integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.
Optional single antenna global navigation satellite system (GNSS) gives you visual and auditory guidance to grade.
Optional auxiliary relay powers on and turns off CB radios, beacon lights, and other attachments without you taking your hands off the joysticks.
Enhance visibility to make service work easier and safer with optional inspection lighting.
Make the jobsite safer with an optional swing alarm.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
Build Number: 07C

High Performance

The 374 can load up to 33 trucks per hour with 36 tonne (40 ton) capacity.
Swing torque increase of 10 percent makes cycle times faster than the previous series.
Multifunctioning is smoother and more efficient with the hydrostatic swing circuit.
Enhanced heavy lift mode increases system pressure to help you pick and place heavy material with ease.
Booms, sticks, and frames are up to two times more durable than the previous series, which will give you years of reliable performance in the harshest environments.
Match the excavator to the job with three operating modes: Power, Smart, and ECO.
Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
Don’t let the temperature stop you from working. This excavator has a high-ambient capability of 52° C (125° F) and standard cold start capability of –18° C (-0.4° F).

Boost Efficiency and Productivity

Boost productivity up to 45% versus traditional grading with standard Cat Grade with 2D system – includes indicate-only and laser capability.
Standard Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging.
Upgrade easily to optional Cat Grade with Advanced 2D or 3D.
Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with Swing Assist.
Standard Cat Payload on-board weighing helps you achieve precise load targets and increase loading efficiency with real-time payload estimates.
Standard Product Link provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through VisionLink online interface, helping you improve jobsite efficiency with lower operating costs.
VisionLink™ helps you remotely manage production targets. The monitor's USB port lets you download your results from one shift all the way up to 30 days of work so you can manage progress without needing an internet connection or VisionLink subscription.
All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.
Remote troubleshoot connects you to a dealer service pro to help solve your problem and quickly get you to work.
Remote flash works around your schedule to ensure your machine's software is up to date for optimal performance.

Work In Comfort

Choose between Deluxe and Premium cabs – both with automatic climate control.
Stay warm with the Deluxe heated seat; stay warm and cool with the Premium heated and ventilated seat.
Get in and out of the cab easier using the tip-up left console.
Advanced viscous mounts reduce cab vibration up to 50 percent over previous excavator models.
Control the excavator comfortably with easy-to-reach controls all located in front of you.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

Simple to Operate

Start the engine with a push button; use a Bluetooth key fob or the unique Operator ID function.
Program each joystick button, including power mode, response, and pattern, using Operator ID; the machine will remember what you set each time you go to work.
Program up to four depth and slope offsets so you can easily get to grade without a grade checker – a real time saver and safety enhancer on the jobsite.
Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds – all to prevent wear and tear on the attachment and excavator.
Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
Navigate quickly on the standard high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
A second 254 mm (10 in) monitor is available for the Cat Grade with Advanced 2D and Cat Grade with 3D.
The Cat PL161 Attachment Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy. The excavator’s onboard Bluetooth reader will locate the device automatically.
Save more time and energy with available work tool recognition. A simple shake of the attached tool confirms its identity; it also ensures all the attachment settings are correct so you can get to work quickly and efficiently.
Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
Need more lift during your shift? Auto heavy lift gives you 8% more power when you need it for as long as you need it.

Less Maintenance

Expect up to 20 percent less maintenance cost than the 374F due to reduced hydraulic oil capacity and extended and synchronized service intervals
The excavator is auto lube ready with built-in mounting points; an available auto lube retrofit kit provides additional hardware to mount a grease pump and line guards.
Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
Using Cat genuine oil and filters and doing typical S∙O∙S monitoring will double the current service interval to 1,000 hours, giving you greater uptime to do more work.
The advanced air intake filter with pre-cleaner has double the dust holding capacity of the previous air intake filter.
The hydraulic oil filter provides improved filtration performance and longer 3,000 hour replacement interval – 50 percent longer than previous filter designs.
The high-efficiency hydraulic fan has an automatic reverse function to keep cores free from debris, eliminating the need for any operator interaction.
S∙O∙S ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.

Enhanced Safety

Standard 2D E-Fence is integrated right out of the factory, which prevents the excavator from moving outside of operator-defined set points.
Lift Assist helps you avoid tipping by letting you know if your load is within the excavator’s safe working range limits.
Rear and right-hand-sideview cameras are standard. Upgrade to 360° visibility and you’ll easily visualize objects and personnel around the excavator in a single view.
See all around the machine with the premium 360° lighting package and its 1800 lm lights on the chassis, cab, boom, sides, and rear.
Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
A travel direction indicator helps operators know which way to activate the travel levers.
Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design.
A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.

Full Specifications Standard Equipment Optional Equipment

Product Specifications for 374 - Tier 4

Engine

Net Power - ISO 9249	484 HP 361 kW
Engine Model	Cat C15 Cat C15
Engine Power - ISO 14396	485 HP 362 kW
Bore	5.4 in 137 mm
Stroke	6.7 in 171 mm
Displacement	928 in³ 15.2 l
Biodiesel Capability	Up to B20¹ Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator. Engine speed at 1,700 rpm. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator. Engine speed at 1,700 rpm.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System

Main System - Maximum Flow - Implement	237 gal/min 896 l/min
Maximum Pressure - Equipment	5366 psi 37000 kPa
Maximum Pressure - Equipment - Lift Mode	5511 psi 38000 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa
Maximum Pressure - Swing	5076 psi 35000 kPa

Swing Mechanism

Swing Speed	6.34 r/min 6.34 r/min
Maximum Swing Torque	220000 ft·lbf 298 kN·m

Weights

Operating Weight	158200 lb 71700 kg
Note	Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight.

Service Refill Capacities

Fuel Tank Capacity	243 gal (US) 920 l
Cooling System	19 gal (US) 71 l
Engine Oil	16 gal (US) 62 l
Swing Drive	5 gal (US) 20 l
Final Drive - Each	9 gal (US) 32 l
Hydraulic System - Including Tank	164 gal (US) 620 l
Hydraulic Tank	86 gal (US) 326 l
DEF Tank	21 gal (US) 80 l

Dimensions

Boom	Reach 7.8m (25'7") Reach 7.8m (25'7")
Stick	R3.6m (11'10") R3.6m (11'10")
Bucket	SD 3.3 m³ (4.32 yd³) SD 3.3 m³ (4.32 yd³)
Shipping Height - Top of Cab	11.8 ft 3559 mm
Handrail Height	13 ft 3982 mm
Shipping Length	44.9 ft 13652 mm
Tail Swing Radius	13.8 ft 4171 mm
Counterweight Clearance	4.1 ft 1494 mm
Ground Clearance	2.6 ft 782 mm
Track Length	19.3 ft 5873 mm
Track Length to Center of Rollers	15.5 ft 4705 mm
Track Gauge	11.2 ft 3410 mm
Transport Width	11.1 ft 3400 mm
Note	Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps

Working Ranges & Forces

Maximum Digging Depth	28.1 ft 8570 mm
Boom	Reach 7.8m (25'7") Reach 7.8m (25'7")
Stick	R3.6m (11'10") R3.6m (11'10")
Bucket	SD 3.3 m³ (4.32 yd³) SD 3.3 m³ (4.32 yd³)
Maximum Reach at Ground Level	43.2 ft 13160 mm
Maximum Cutting Height	41.2 ft 12550 mm
Maximum Loading Height	27.7 ft 8430 mm
Minimum Loading Height	10.1 ft 3310 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	27.8 ft 8440 mm
Maximum Vertical Wall Digging Depth	22.8 ft 6910 mm
Bucket Digging Force - ISO	80550 ft·lbf 358 kN
Stick Digging Force - ISO	66390 ft·lbf 295 kN

374 - Tier 4 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

CAB

High-resolution 254 mm (10") LCD touch screen monitor

Heated seat with air-adjustable suspension (Deluxe only)

Heated and cooled seat with auto adjustable suspension (Premium only)

CAT TECHNOLOGY

Cat Product Link

Remote flash

Remote troubleshoot

Compatibility with radios and base stations from Trimble, Topcon, and Leica

Capability to install 3D grade systems from Trimble, Topcon, and Leica

Cat Grade with 2D and offset memory

Cat Grade Assist

Cat Payload

2D E-Fence

Lift Assist

ELECTRICAL SYSTEM

Maintenance-free 1,400 CCA batteries (x2)

Centralized electrical disconnect switch

ENGINE

Three selectable modes: Power, Smart, and Eco

Auto engine speed control

Up to 4500m (14,760 ft) altitude capability

52°C (126°F) high-ambient cooling capacity

-18°C (-0.4°F) cold start capability

Hydraulic reverse fan

Double element air filter with integrated pre-cleaner

Remote disable

HYDRAULIC SYSTEM

Boom and stick regeneration circuit

Electronic main control valve

Dedicated closed loop swing circuit

Heavy lift mode

Auto hydraulic oil warmup

Auto swing parking brake

High performance hydraulic return filter

Two speed travel

Bio hydraulic oil capability

SAFETY AND SECURITY

Caterpillar One Key security system

Lockable external tool / storage box

Lockable door, fuel, and hydraulic tank locks

Service platform with anti-skid plate & recessed bolts

Right hand handrail and hand hold

Mirror package

Signaling/warning horn

Ground-level secondary engine shutoff switch

Rearview and right-hand-sideview cameras

SERVICE AND MAINTENANCE

Auto lube ready

Grouped location of engine oil & fuel filters

Scheduled Oil Sampling (S·O·S) ports

UNDERCARRIAGE AND STRUCTURES

Long variable gauge

Standard counterweight

Towing eye on base frame

374 - Tier 4 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

BOOMS AND STICKS

7.0m (23') Mass boom

7.8m (25'7") Reach boom

2.57m (8'5") Mass stick

2.84m (9'4") Reach stick

3.0m (9'10") Mass stick

3.6m (11'10") Reach stick

4.15m (15'4") Reach stick

4.67m (15'4") Reach stick

CAB

Cat Stick Steer

Auxiliary relay

CAT TECHNOLOGY

Cat Grade connectivity

Cat Grade with Advanced 2D

Cat Grade with 3D single GNSS

Cat Grade with 3D dual GNSS

Laser catcher

ELECTRICAL SYSTEM

Premium surround lighting package

ENGINE

Cold start block heaters

HYDRAULIC SYSTEM

Smart Boom

Advanced tool control

Medium-pressure auxiliary circuit

Quick coupler circuit

SAFETY AND SECURITY

Cat Command remote control

Swing alarm

360° visibility

Boom lowering check valve

Stick lowering check valve

Inspection lighting

SERVICE AND MAINTENANCE

Integrated vehicle health management

Electric refueling pump with auto shutoff

QuickEvac maintenance ready

UNDERCARRIAGE AND STRUCTURES

Counterweight with removal device

650mm (26") HD double grouser track shoes

750mm (30") HD double grouser track shoes

900mm (35") HD double grouser track shoes

Product Specifications for 374 - Tier 4

Download Print

Engine

Net Power - ISO 9249	484 HP 361 kW
Engine Model	Cat C15 Cat C15
Engine Power - ISO 14396	485 HP 362 kW
Bore	5.4 in 137 mm
Stroke	6.7 in 171 mm
Displacement	928 in³ 15.2 l
Biodiesel Capability	Up to B20¹ Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, and Japan 2014 emission standards. Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator. Engine speed at 1,700 rpm. Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator. Engine speed at 1,700 rpm.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System

Main System - Maximum Flow - Implement	237 gal/min 896 l/min
Maximum Pressure - Equipment	5366 psi 37000 kPa
Maximum Pressure - Equipment - Lift Mode	5511 psi 38000 kPa
Maximum Pressure - Travel	5076 psi 35000 kPa
Maximum Pressure - Swing	5076 psi 35000 kPa

Swing Mechanism

Swing Speed	6.34 r/min 6.34 r/min
Maximum Swing Torque	220000 ft·lbf 298 kN·m

Weights

Operating Weight	158200 lb 71700 kg
Note	Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight.

Service Refill Capacities

Fuel Tank Capacity	243 gal (US) 920 l
Cooling System	19 gal (US) 71 l
Engine Oil	16 gal (US) 62 l
Swing Drive	5 gal (US) 20 l
Final Drive - Each	9 gal (US) 32 l
Hydraulic System - Including Tank	164 gal (US) 620 l
Hydraulic Tank	86 gal (US) 326 l
DEF Tank	21 gal (US) 80 l

Dimensions

Boom	Reach 7.8m (25'7") Reach 7.8m (25'7")
Stick	R3.6m (11'10") R3.6m (11'10")
Bucket	SD 3.3 m³ (4.32 yd³) SD 3.3 m³ (4.32 yd³)
Shipping Height - Top of Cab	11.8 ft 3559 mm
Handrail Height	13 ft 3982 mm
Shipping Length	44.9 ft 13652 mm
Tail Swing Radius	13.8 ft 4171 mm
Counterweight Clearance	4.1 ft 1494 mm
Ground Clearance	2.6 ft 782 mm
Track Length	19.3 ft 5873 mm
Track Length to Center of Rollers	15.5 ft 4705 mm
Track Gauge	11.2 ft 3410 mm
Transport Width	11.1 ft 3400 mm
Note	Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps

Working Ranges & Forces

Maximum Digging Depth	28.1 ft 8570 mm
Boom	Reach 7.8m (25'7") Reach 7.8m (25'7")
Stick	R3.6m (11'10") R3.6m (11'10")
Bucket	SD 3.3 m³ (4.32 yd³) SD 3.3 m³ (4.32 yd³)
Maximum Reach at Ground Level	43.2 ft 13160 mm
Maximum Cutting Height	41.2 ft 12550 mm
Maximum Loading Height	27.7 ft 8430 mm
Minimum Loading Height	10.1 ft 3310 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	27.8 ft 8440 mm
Maximum Vertical Wall Digging Depth	22.8 ft 6910 mm
Bucket Digging Force - ISO	80550 ft·lbf 358 kN
Stick Digging Force - ISO	66390 ft·lbf 295 kN

374 - Tier 4 Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

CAB

High-resolution 254 mm (10") LCD touch screen monitor

Heated seat with air-adjustable suspension (Deluxe only)

Heated and cooled seat with auto adjustable suspension (Premium only)

CAT TECHNOLOGY

Cat Product Link

Remote flash

Remote troubleshoot

Compatibility with radios and base stations from Trimble, Topcon, and Leica

Capability to install 3D grade systems from Trimble, Topcon, and Leica

Cat Grade with 2D and offset memory

Cat Grade Assist

Cat Payload

2D E-Fence

Lift Assist

ELECTRICAL SYSTEM

Maintenance-free 1,400 CCA batteries (x2)

Centralized electrical disconnect switch

ENGINE

Three selectable modes: Power, Smart, and Eco

Auto engine speed control

Up to 4500m (14,760 ft) altitude capability

52°C (126°F) high-ambient cooling capacity

-18°C (-0.4°F) cold start capability

Hydraulic reverse fan

Double element air filter with integrated pre-cleaner

Remote disable

HYDRAULIC SYSTEM

Boom and stick regeneration circuit

Electronic main control valve

Dedicated closed loop swing circuit

Heavy lift mode

Auto hydraulic oil warmup

Auto swing parking brake

High performance hydraulic return filter

Two speed travel

Bio hydraulic oil capability

SAFETY AND SECURITY

Caterpillar One Key security system

Lockable external tool / storage box

Lockable door, fuel, and hydraulic tank locks

Service platform with anti-skid plate & recessed bolts

Right hand handrail and hand hold

Mirror package

Signaling/warning horn

Ground-level secondary engine shutoff switch

Rearview and right-hand-sideview cameras

SERVICE AND MAINTENANCE

Auto lube ready

Grouped location of engine oil & fuel filters

Scheduled Oil Sampling (S·O·S) ports

UNDERCARRIAGE AND STRUCTURES

Long variable gauge

Standard counterweight

Towing eye on base frame

374 - Tier 4 Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

BOOMS AND STICKS

7.0m (23') Mass boom

7.8m (25'7") Reach boom

2.57m (8'5") Mass stick

2.84m (9'4") Reach stick

3.0m (9'10") Mass stick

3.6m (11'10") Reach stick

4.15m (15'4") Reach stick

4.67m (15'4") Reach stick

CAB

Cat Stick Steer

Auxiliary relay

CAT TECHNOLOGY

Cat Grade connectivity

Cat Grade with Advanced 2D

Cat Grade with 3D single GNSS

Cat Grade with 3D dual GNSS

Laser catcher

ELECTRICAL SYSTEM

Premium surround lighting package

ENGINE

Cold start block heaters

HYDRAULIC SYSTEM

Smart Boom

Advanced tool control

Medium-pressure auxiliary circuit

Quick coupler circuit

SAFETY AND SECURITY

Cat Command remote control

Swing alarm

360° visibility

Boom lowering check valve

Stick lowering check valve

Inspection lighting

SERVICE AND MAINTENANCE

Integrated vehicle health management

Electric refueling pump with auto shutoff

QuickEvac maintenance ready

UNDERCARRIAGE AND STRUCTURES

Counterweight with removal device

650mm (26") HD double grouser track shoes

750mm (30") HD double grouser track shoes

900mm (35") HD double grouser track shoes

Compatible Technology and Services

Leverage Caterpillar connected data and security principles to improve efficiencies, increase productivity and make your business more profitable.

Assist

Command

Equipment Management

Grade

Payload

Productivity

Cat Grade Assist for Excavators

Cat Grade Assist for excavators automates boom and stick movements for more accurate cuts with less effort. Grade Assist uses machine position sensors and operator defined depth and slope parameters to enable single-lever digging.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Grade Assist for excavators automates boom and stick movements for more accurate cuts with less effort. Grade Assist uses machine position sensors and operator defined depth and slope parameters to enable single-lever digging.

Explore Technology

Cat Command for Excavating

Cat Command for Excavating is a remote control option that contributes to jobsite safety by allowing operators to run an excavator remotely in hazardous applications.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Command for Excavating is a remote control option that contributes to jobsite safety by allowing operators to run an excavator remotely in hazardous applications.

Explore Technology

Cat Inspect

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology
Cat PL161 Attachment Locator

The Cat PL161 Attachment Locator is the most advanced OEM integrated solution for attachment tracking. The PL161 mounts easily to your attachments or anything else you want to track.

Explore Technology
Cat Product Link

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology
VisionLink®

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat® Inspect allows you to access your equipment data on your mobile device. This easy-to-use app lets you capture inspection data and integrates with your other Cat data systems, so you can keep a close eye on your fleet. More than one million inspections are completed each year, providing convenience and accountability to equipment owners.

Explore Technology

The Cat PL161 Attachment Locator is the most advanced OEM integrated solution for attachment tracking. The PL161 mounts easily to your attachments or anything else you want to track.

Explore Technology

Cat® Product Link™ wirelessly connects you to your equipment giving you valuable insight into how your machine or fleet is performing. Information such as location, hours, fuel usage, productivity, idle time, and diagnostic codes are made available through online web applications so that you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower the cost of owning and operating your fleet. Available with satellite or cellular connectivity.

Explore Technology

VisionLink® is a cloud-based software application that takes the guesswork out of fleet management with key insights to maximize performance - regardless of fleet size or equipment manufacturer. Receive equipment data seamlessly to your desktop or mobile device, all from a convenient centralized solution to make informed decisions at every turn.

Explore Technology

Cat Grade with 2D for Excavators

Cat Grade with 2D helps excavator operators work up to 35% more efficiently in a wide variety of applications. Delivering real-time guidance for accurate vertical and horizontal control, Grade with 2D helps to ensure that cuts and fills are made to exact specifications – without under or overcutting.

Explore Technology
Cat Grade with 3D for Excavators

Grade with 3D adds GNSS technology and RTK positioning guidance to simplify the grading process of complex designs often found on large infrastructure and commercial projects.

Explore Technology
Cat Grade with Advanced 2D for Excavators

Cat Grade with Advanced 2D gives excavator operators the ability to input, edit, and grade simple two-dimensional designs by using real time bucket tip and elevation guidance provided by the system.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Cat Grade with 2D helps excavator operators work up to 35% more efficiently in a wide variety of applications. Delivering real-time guidance for accurate vertical and horizontal control, Grade with 2D helps to ensure that cuts and fills are made to exact specifications – without under or overcutting.

Explore Technology

Grade with 3D adds GNSS technology and RTK positioning guidance to simplify the grading process of complex designs often found on large infrastructure and commercial projects.

Explore Technology

Cat Grade with Advanced 2D gives excavator operators the ability to input, edit, and grade simple two-dimensional designs by using real time bucket tip and elevation guidance provided by the system.

Explore Technology

Cat Payload for Excavators

Next generation excavators take on all kinds of tasks - loading, stockpiling, material handling, and more. Cat® Payload technology provides on-the-go weighing to help operators hit exact targets every time and avoid overloading, underloading, or misloading materials.

Explore Technology

1 - 8 of 9 Items items

Previous Next

Next generation excavators take on all kinds of tasks - loading, stockpiling, material handling, and more. Cat® Payload technology provides on-the-go weighing to help operators hit exact targets every time and avoid overloading, underloading, or misloading materials.

Explore Technology

VisionLink® Productivity

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

1 - 8 of 9 Items items

Previous Next

VisionLink® Productivity is an easy-to-use cloud-based platform that gathers and summarizes machine telematics and jobsite data from all your equipment. Actionable performance data is transmitted to the web platform for users to access anywhere, anytime via a mobile, tablet, or desktop device - on or off the jobsite.

Explore Technology

See how 374 - Tier 4 compares against frequently compared products.

Excavators 374 - Tier 4

Net Power - ISO 9249: 484 HP; 361 kW
Operating Weight: 158200 lb; 71700 kg
Maximum Digging Depth: 28.1 ft; 8570 mm

Selected Model

Excavators 352

Net Power - ISO 9249: 443 HP; 330 kW
Operating Weight: 111300 lb; 50500 kg
Maximum Digging Depth: 26.11 ft; 8210 mm

Model Details

Excavators 374 - Tier 3

Net Power - ISO 9249: 480 HP; 358 kW
Operating Weight: 163100 lb; 74000 kg
Maximum Digging Depth: 25.1 ft; 7660 mm

Model Details

Use the comparison tool to compare detailed specs of Cat and competitor models.

COMPARE ALL MODELS

Tools And Expert Help At Every Turn

Payment Calculator

Current Offers

Rental Options

Used Options

Find Dealer

Boost Productivity. Improve Efficiency.

Cat® Technology for construction helps contractors meet production goals and improve efficiencies.

Learn More

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

Videos

360 View

All

Take the interactive virtual product tour to explore the great features and benefits of the 374 - Tier 4

Start 374 - Tier 4 Tour

Internet Explorer users may experience issues with certain features of our site.
Please try a current version of an alternate browser (i.e. Google Chrome, Microsoft Edge, Mozilla Firefox) for the full Cat.com experience.

10% more swing torque

Up To 2X more structural durability

Up To 20% less maintenance cost

Large Excavators 374 - Tier 4

Overview

High Production and Durability with Low Maintenance

Benefits

10% more swing torque

Up To 2X more structural durability

Up To 20% less maintenance cost

Features At A Glance

Product Specifications for 374 - Tier 4

Engine

Hydraulic System

Swing Mechanism

Weights

Service Refill Capacities

Dimensions

Working Ranges & Forces

374 - Tier 4 Standard Equipment

NOTE

CAB

CAT TECHNOLOGY

ELECTRICAL SYSTEM

ENGINE

HYDRAULIC SYSTEM

SAFETY AND SECURITY

SERVICE AND MAINTENANCE

UNDERCARRIAGE AND STRUCTURES

374 - Tier 4 Optional Equipment

NOTE

BOOMS AND STICKS

CAB

CAT TECHNOLOGY

ELECTRICAL SYSTEM

ENGINE

HYDRAULIC SYSTEM

SAFETY AND SECURITY

SERVICE AND MAINTENANCE

UNDERCARRIAGE AND STRUCTURES

Product Specifications for 374 - Tier 4

Engine

Hydraulic System

Swing Mechanism

Weights

Service Refill Capacities

Dimensions

Working Ranges & Forces

374 - Tier 4 Standard Equipment

NOTE

CAB

CAT TECHNOLOGY

ELECTRICAL SYSTEM

ENGINE

HYDRAULIC SYSTEM

SAFETY AND SECURITY

SERVICE AND MAINTENANCE

UNDERCARRIAGE AND STRUCTURES

374 - Tier 4 Optional Equipment

NOTE

BOOMS AND STICKS

CAB

CAT TECHNOLOGY

ELECTRICAL SYSTEM

ENGINE

HYDRAULIC SYSTEM

SAFETY AND SECURITY

SERVICE AND MAINTENANCE

UNDERCARRIAGE AND STRUCTURES

Compatible Technology and Services

Cat Grade Assist for Excavators

Cat Command for Excavating

Cat Inspect

Cat PL161 Attachment Locator

Cat Product Link

VisionLink®

Cat Grade with 2D for Excavators

Cat Grade with 3D for Excavators

Cat Grade with Advanced 2D for Excavators

Cat Payload for Excavators

Product Brochures and More Are Ready to Download!