< Back

View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

The industry standard continues to roll forward with the Cat® 14M3 motor grader. With a larger engine, improved fuel economy and machine balance, enhanced transmission performance and a range of technology, this machine is ready to excel at your grading projects.

Engine

Units:
Base Power (1st Gear) - Net 238.0 HP 178.0 kW Less
Engine Model Cat C13 ACERT VHP Cat C13 ACERT VHP Less
Bore 5.1 in 130.0 mm Less
Stroke 6.2 in 157.0 mm Less
Speed at Rated Power 1,850 rpm 1,850 rpm Less
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Less
Standard Capability 122.0 °F 50.0 °C Less
Note (2) Optimized VHP Plus is standard for the 14M3. Optimized VHP Plus is standard for the 14M3. Less
Torque Rise 41% 41% Less
Maximum Altitude - Full Power 13900.0 ft 4237.0 m Less
Maximum Torque - VHP Plus 1137.0 lb/ft 1542.0 N·m Less
Emissions Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent Less
Maximum Altitude - Full Power (Tier 3) 14349.0 ft 4374.0 m Less
Maximum Altitude - Full Power (Tier 2) 12049.0 ft 3672.0 m Less
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Less
Standard - Fan Speed - Minimum 550 rpm 550 rpm Less
Note (4) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) Less
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Less
Standard - Fan Speed - Maximum 1,600 rpm 1,600 rpm Less
Displacement 763.0 in³ 12.5 l Less
Number of Cylinders 6 6 Less

Frame

Circle - Outer Diameter 71.7 in 1822.0 mm Less
Front Axle - Wheel Lean - Left/Right 17.1° 17.1° Less
Front Axle - Total Oscillation per Side 32° 32° Less

Moldboard

Blade Width 14.0 ft 4.2 m Less
Arc Radius 16.3 in 413.0 mm Less
Throat Clearance 4.6 in 117.0 mm Less
Blade Width - With End Bits 169.0 in 4290.0 mm Less
Blade Height - With Cutting Edge 24.9 in 631.0 mm Less
Blade Width - Without End Bits 164.0 in 4166.0 mm Less
Blade Height - Without Cutting Edge 23.0 in 585.0 mm Less

Blade Range

Maximum Depth of Cut 23.3 in 593.0 mm Less
Circle Centershift - Left 25.6 in 650.0 mm Less
Maximum Lift Above Ground 16.5 in 419.0 mm Less
Circle Centershift - Right 20.5 in 520.0 mm Less
Blade Tip Range - Backward Less
Maximum Shoulder Reach Outside of Tires - Right 78.9 in 2004.0 mm Less
Moldboard Sideshift - Right 31.1 in 790.0 mm Less
Moldboard Sideshift - Left 29.1 in 740.0 mm Less
Maximum Shoulder Reach Outside of Tires - Left 73.6 in 1870.0 mm Less
Blade Tip Range - Forward 40° 40° Less

Weights

Operating Weight - Typically Equipped 57250.0 lb 25968.0 kg Less
Gross Vehicle Weight - Base* - Total 50980.0 lb 23124.0 kg Less
Gross Vehicle Weight - Base* - Front Axle 13994.0 lb 6344.0 kg Less
Gross Vehicle Weight - Typically Equipped - Total 57250.0 lb 25968.0 kg Less
Gross Vehicle Weight - Typically Equipped - Rear Axle 42005.0 lb 19053.0 kg Less
Gross Vehicle Weight - Typically Equipped - Front Axle 15245.0 lb 6915.0 kg Less
Gross Vehicle Weight - Base* - Rear Axle 36994.0 lb 16780.0 kg Less
Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. Less

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). Less

TECHNOLOGY THAT GETS WORK DONE

MOVE MORE, BURN LESS.

MORE CONTROL AND EFFICIENCY

DESIGNED FOR OPERATORS

BUILT-IN SAFETY FEATURES

SAVE MAINTENANCE TIME

14M3 Standard Equipment

OPERATOR ENVIRONMENT
  • Joystick, power adjustable armrests
  • Air conditioner with heater
  • Centershift pin indicator
  • Coat hook
  • Cup holder
  • Display, digital speed and gear
  • Doors, left and right side with wiper
  • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
  • Gauges, machine level
  • Message display
  • Joystick gear selection
  • Joystick hydraulic controls for implements, steering, transmission
  • Ladders, cab, left and right side
  • Lights, left and right side lights
  • Lights, night time cab, LED
  • Meter, hour, digital
  • Mirror, inside rearview, wide angle
  • Power port, 12V
  • Radio ready, entertainment
  • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
  • Seat, mechanical suspension, cloth
  • Storage compartments
  • Throttle control, electronic

POWER TRAIN
  • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
  • Articulation, automatic Return-to-Center
  • Air-to-Air After Cooler (ATAAC)
  • Auto Diff Lock
  • Brake wear indication
  • Brakes, oil disc, four-wheel, hydraulic
  • Consistent power to ground
  • Monitoring system
  • Clutch, circle drive slip
  • Differential, lock/unlock*
  • Drain, engine oil, ecology
  • Demand fan, hydraulic
  • Engine ECO Mode
  • Ether starting aid
  • Fuel tank, ground level
  • Fuel-water separator
  • Hydraulic demand fan
  • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
  • Optimized VHP
  • Parking brake - multi disc, sealed, oil-cooled
  • Priming pump, fuel
  • Sediment drain, fuel tank
  • Three variations of the C13 engine with ACERT technology. One meets Tier 4 Final/Stage IV emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
  • Transmission, 8F/6R, power shift, direct drive

ELECTRICAL
  • Alternator, 150 ampere, sealed
  • Batteries, maintenance free, HD, 1,125 CCA
  • Breaker panel
  • Electrical system, 24V*
  • Belt, serpentine, automatic tensioner
  • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
  • Product Link
  • Starter, electric
  • Service lights, enclosure, rear, LED

SAFETY
  • Alarm, back up
  • Ground level engine shutdown
  • Hammer (emergency exit)
  • Horn, electric
  • Lockout, hydraulic implement for roading
  • Operator Not Present Monitoring system
  • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
  • Seat belt, retractable 76 mm (3 in)
  • Secondary steering
  • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)

14M3 Optional Equipment

OPERATOR ENVIRONMENT
  • Air horn
  • Heated door
  • Mirrors high visibility
  • Mirrors, outside heated 24V
  • Mirrors, outside mounted
  • Seat, heated
  • Seat, heated/ventilated
  • Rearview camera
  • Seat belt indicator

POWER TRAIN
  • Transmission, autoshift
  • Engine, compression brake

TECHNOLOGY
  • Cat GRADE with Cross Slope
  • Stable Blade
  • Advanced Control Joysticks
  • Auto Articulation

GUARDS
  • Debris guard
  • Front axle cylinder guards
  • Rear fenders
  • Sound suppression, engine enclosure and transmission
  • Transmission guard
  • Accumulators, blade lift
  • Fast fill fuel, 378.5 L/min (100 gal/min)
  • Metallic DCM wear strips

ELECTRICAL
  • Light, LED, warning strobe
  • Lights, front headlights high
  • Lights, front headlights low
  • Mounting, for warning light
  • Working lights halogen
  • Working lights LED

SAFETY
  • Additional rearview camera and monitor
  • Machine security system key

OTHER ATTACHMENTS
  • Moldboard, 4.9 m (16 ft)
  • Heater, engine coolant, 120V
  • Heater, engine coolant, 240V
  • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
  • Product Link satellite, cellular
  • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
  • Snow wing, mounting frame ready
  • Fast fill

WORK TOOLS/G.E.T.
  • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
  • Push block, counterweight
  • Ripper, rear
  • Tooth, ripper

FLUIDS
  • Coolant, -51 degrees C (-60 degrees F)