< Back

Financing & Insurance
See our Offers

Overview

Providing reliable energy solutions, our C2.2 diesel generator sets are made to meet your standby and prime applications. All standby C2.2 generator sets are supplied with 4 years extended service coverage as standard. We've designed each to ISO 8528-5 transient response requirements. All C2.2 generator sets are EU Stage IIIA emissions compliant. We offer easy-to-use Cat control panels, EMCP 4.1 or EMCP 4.2 options. Browse a broad range of accessories including galvanised sound attenuated enclosures and integral fuel tanks. Our C2.2 generator sets are made for demands, so you can make yours.

Generator Set Specifications

Units:
Minimum Rating 15.5 ekW (15.5 kVA) 15.5 ekW (15.5 kVA) Less
Maximum Rating 20.0 ekW (25.0 kVA) 20.0 ekW (25.0 kVA) Less
Voltage 110 to 415 Volts 110 to 415 Volts Less
Frequency 60 Hz 60 Hz Less
Speed 1800 RPM 1800 RPM Less

Generator Set Configurations

Emissions/Fuel Strategy EU Stage IIIA EU Stage IIIA Less

Engine Specifications

Engine Model Cat® C2.2, In-line 4, 4-cycle diesel Cat® C2.2, In-line 4, 4-cycle diesel Less
Compression Ratio 22.5:1 22.5:1 Less
Governor Type Mechanical Mechanical Less
Fuel System Indirect Injection Indirect Injection Less
Bore 3.3 in 84.0 mm Less
Displacement 135.2 in³ 2.2 l Less
Stroke 3.9 in 100.0 mm Less

C2.2 (60 Hz)Standard Equipment

Air Inlet System
  • Air cleaner; light duty with disposable element

Control Panel
  • EMCP4.1 control panel

Cooling System
  • Radiator and cooling fan with guards
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Caterpillar extended life coolant

Exhaust System
  • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose

Fuel System
  • Standard open set fuel tank / base supplied
  • Base, formed steel with single wall integral 8-hour fuel tank

Generators and Generator Attachments
  • 12 leads
  • IP23 Protection
  • Voltage regulator (single phase sensing)
  • Tower panel, IP22, bottom cable entry
  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • Segregated low voltage (AC/DC) wiring panel

Governing System
  • Mechancial governing system

Lube System
  • Lubricating oil
  • Oil drain line with valve

Mounting System
  • Captive linear vibration isolators between base and engine-generator
  • includes lifting provisions and termination points for coolant

Starting / Charging System
  • 12V battery with rack & cables

General
  • Engine and alternator pre-paint, Caterpillar yellow

C2.2 (60 Hz)Optional Equipment

Global Certifications
  • Certification for CIS

Circuit Breakers
  • 4 Pole circuit breaker

Control Panel Options
  • Volt free contacts for common alarm
  • Volt free contacts for genset running
  • Battery charger
  • Emergency stop with key

Cooling System
  • Coolant heater

Enclosures
  • Sound attenuated enclosure (GALV)
  • Single point lift for enclosure

European Certifications
  • Upgrade to STD set for "CE"

Fuel System
  • Skidbase for open sets
  • Skidbase for Enclosures
  • DEFRA bunded fuel tank
  • Low fuel level alarm
  • Fuel transfer control
  • 1000 hr extended service interval
  • Base feet

Mounting Options
  • Battery removal
  • Industrial silencer removal
  • Silencer installation kit

Accessories / Miscellaneous
  • Radiator Stone Guard
  • Packing Case - compact set
  • Packing case - canopied set