< Back

View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

The Cat CG132B family of gas engines are perfectly tailored to the challenges of the power plant in an age of global value chains.

Gas Generator Sets Specification

Units:
Maximum Continuous Rating 800 kW 800 kW Less
Fuel Type Natural Gas, Biogas Natural Gas, Biogas Less
Maximum Electrical Efficiency 43.5%/42.6% 43.5%/42.6% Less
Maximum Standby Rating 800 kW 800 kW Less
Frequency 50/60Hz 50/60Hz Less
RPM 1500 / 1800 rpm 1500 / 1800 rpm Less

Engine Specifications

Aspiration TA TA Less
Bore 5.2 in 132.0 mm Less
Displacement 2135.8 in³ 35.0 l Less
Engine Model CG132 CG132 Less
Stroke 6.3 in 160.0 mm Less

Generator Set Dimensions

Length 165.0 in 4200.0 mm Less
Width 70.0 in 1780.0 mm Less
Height 85.0 in 2150.0 mm Less
Dry Weight - Genset NaN lb NaN kg Less

Lower Operating Costs

Optimized engine components mean the CG132 uses up to 50 percent les lubricating oil than competing generator sets, which means more money stays in your company's pockets.

Smaller footprint

The CG132 uses nearly 50 percent less space than similar system. Less space means lower installation costs.

System Control

Control the entire system, not just the engine, with the Cat Total Electronic Management System. Features like temperature and pressure monitoring for each cylinder and anti-knock control allow for maximum power output and the best possible fuel utilization, even if gas composition changes.

Flexible Fuel Usage

Our gas-mixer technology and Total Electronic Management System let you use a wide variety of gases, including problematic gases like digester, landfill and sewage gases

CG132B-16 Standard Equipment

Air Inlet
  • One-element single-stage air cleaner with enclosure and sevice indicator
  • Turbocharger with a water-cooled bearing case for all cylinder

Control Panels
  • TPEM (Total Plant & Energy Management System)

Cooling
  • Jacket water and SCAC thermostats
  • Electrical jacket water and aftercooler coolant pump
  • flange connections for JW inlet and outlet
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Flange connections for JW inlet and outlet
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Cat flanges on SCAC circuit

Exhaust
  • Closed crankcase ventilation system
  • PEARL/Low resistence exhaust system
  • Exhaust waste gate for the CG132B-16

Fuel system
  • Electronic fuel metering valve
  • Pre-chamber spark plugs
  • Independently controlled cylinder monitoring and ignition system
  • Electronic fuel metering valve
  • Pre-chamber spark plugs
  • Independently controlled cylinder monitoring and ignition system

Generator
  • Reactive droop
  • Bus bar connections
  • Winding temperature detectors
  • Anti-condensation space heater
  • Reactive droop
  • 3-phase sensing and KVAR/PF control
  • Bus bar connections
  • Winding temperature detectors
  • closed-coupled generator result in no torque transmission to the base frame
  • Anti-condensation space heater
  • grid code generator
  • 3-phase sensing and KVAR/PF control

General
  • Crankshaft vibration damper and guard
  • Crankshaft vibration damper and guard

Starting/Charging
  • 24V starting motors
  • Battery disconnect switch
  • Battery disconnect switch

CG132B-16 Optional Equipment

Air Inlet
  • Mounting stand
  • Air cleaner with precleaner

Cooling
  • CHP skid
  • CHP skid