3412C

< Back

Financing & Insurance
See our Offers

Overview

The Cat® 3412C Industrial Diesel Fire Pump Engine is offered in ratings ranging from 476-551 bkW (638-739 bhp) @ 1750-2100 rpm. These ratings are non-certified and are available for global non-regulated areas. They are not FM Approved and not UL Listed. Starting on demand is a must for a fire pump engine - always. Cat® fire pump engines have a reputation for reliable starts and long efficient service.

Power Rating

Units:
Minimum Power 638.0 BHP 476.0 bkW Less
Maximum Power 739.0 BHP 551.0 bkW Less
Rated Speed 1750-2100 rpm 1750-2100 rpm Less

Emission Standards

Emissions Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed Non-Certified. Available for global non-regulated areas. Not FM Approved, Not UL Listed Less

General

Engine Configuration V-12, 4-Stroke-Cycle Diesel V-12, 4-Stroke-Cycle Diesel Less
Bore 137.2 mm (5.4 in) 137.2 mm (5.4 in) Less
Stroke 152.4 mm (6.0 in) 152.4 mm (6.0 in) Less
Displacement 27 L (1648 in³) 27 L (1648 in³) Less
Aspiration Turbocharged Aftercooled (TA) Turbocharged Aftercooled (TA) Less
Compression Ratio 14.5:1 14.5:1 Less
Rotation from Flywheel End Counterclockwise Counterclockwise Less

Engine Dimensions - Approximate

Height 1413.2 mm (55.6 in) 1413.2 mm (55.6 in) Less
Length 1999.8 mm (78.7 in) 1999.8 mm (78.7 in) Less
Weight - Approximate, Net Dry (Basic Operating Engine Without Optional Attachments) 2579 kg (5686 lb) 2579 kg (5686 lb) Less

Emissions

Non-certified for U.S. EPA stationary emergency fire engines. Available for global non-regulated areas. Not FM Approved. Not UL Listed.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.

3412CStandard Equipment

Air Inlet System
  • Air cleaner, regular duty with service indicators
  • Turbocharged

Cooling System
  • Thermostats and housing
  • Jacket water pump, centrifugal
  • Heat exchanger installed
  • Expansion tank

Control System
  • Charging alternator 24 volt, 35 amp
  • Governor control
  • Hydra-mechanical governor

Exhaust System
  • Exhaust manifold
  • Exhaust elbow, dry. 203 mm (8 in) on all Turbocharged engines and Turbocharged Aftercooled with wet exhaust. 152 mm (6 in) on Turbocharged Aftercooled with dry manifolds.

Flywheels & Flywheel Housings
  • SAE No. 0 flywheel
  • SAE No. 0 flywheel housing
  • SAE standard rotation

Fuel System
  • Fuel filter
  • Fuel transfer pump
  • Primary fuel filter
  • Fuel priming pump

Instrumentation
  • Instrument panel, LH
  • Engine oil pressure gauge
  • Fuel pressure gauge
  • Water temperature gauge
  • Tachometer

Lube System
  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filler in valve cover and dipstick, both RH
  • Lube oil filter
  • Rear sump oil pan

Mounting System
  • Supports

Power Take Off
  • Power take-off (PTO) flywheel stub shaft

Protection System
  • Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)

Starting System
  • 24 volt, LH electric starting motor
  • Jacket water heater (6 kW, 240-480 volt)

General
  • Paint: Firepump Red
  • Vibration damper and guard
  • Lifting eyes