C9.3

C9.3 Standard Equipment

Air Inlet System

• Turbocharged

• Air-to-Air Aftercooled

• Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)

Control System

• Electronic control system

• Over-foam wiring harness

• Automatic altitude compensation

• Power compensated for fuel temperature

• Configurable software features

• Engine monitoring system SAE J1939 broadcast and control

• Integrated Electronic Control Unit (ECU)

• Remote fan control

Cooling System

• Vertical or RH thermostat outlet

• Centrifugal water pump

• Guidance on cooling system design available through your dealer to ensure equipment reliability

Flywheels and Flywheel Housing

• Dual rear PTO configuration

• Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).

Fuel System

• Electronic high pressure common rail

• Primary fuel filter

• Secondary fuel filters

• Fuel transfer pump

• Electronic fuel priming

Lube System

• Open crankcase ventilation system

• Oil cooler

• Oil filler

• Lube oil filter

• Oil dipstick

• Gear driven oil pump

• Choice of front, rear or center sumps

• Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)

Power Take Off (PTO)

• SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

General

• Paint: Caterpillar yellow, with optional colors available at request

• Vibration damper

• Lifting eyes

U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment

• Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)

• NOx Reduction System (NRS)

• Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet

• Available in 12 volt or 24 volt systems

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment

• Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)

• Aftertreatment Electronic Control Unit (ECU)

• NOx Reduction System (NRS)

• Pump Electronic Control Unit (PETU)

• Selective Catalytic Reduction (SCR)

• Available in 12V or 24V systems