< Back

Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Providing reliable energy solutions, our C1.1 diesel generator sets are made to meet your standby and prime applications. All standby C1.1 generator sets are supplied with 4 years extended service coverage as standard. We've designed each to ISO 8528-5 transient response requirements. All C1.1 generator sets are EU Stage IIIA emissions compliant. We offer easy-to-use Cat control panels, EMCP 4.1 or EMCP 4.2 options. Browse a broad range of accessories including galvanised sound attenuated enclosures and integral fuel tanks. Our C1.1 generator sets are made for demands, so you can make yours.

Generator Set Specifications

Units:
Minimum Rating 8.0 ekW 8.0 ekW Less
Maximum Rating 8.8 ekW 8.8 ekW Less
Voltage 110 to 480 Volts 110 to 480 Volts Less
Frequency 60 Hz 60 Hz Less
Speed 1800 RPM 1800 RPM Less

Generator Set Configurations

Emissions/Fuel Strategy EU Stage IIIA EU Stage IIIA Less

Engine Specifications

Engine Model C1.1, In-line 4, 4-cycle diesel C1.1, In-line 4, 4-cycle diesel Less
Compression Ratio 23.0:1 23.0:1 Less
Governor Type Mechanical Mechanical Less
Fuel System Indirect Injection Indirect Injection Less
Bore 3.0 in 77.0 mm Less
Displacement 69.0 in³ 1.1 l Less
Stroke 3.2 in 81.0 mm Less

C1.1 (60 Hz)Standard Equipment

Air Inlet System
  • Air cleaner; light duty with disposable element

Control Panel
  • EMCP4.1

Cooling System
  • Radiator and cooling fan with guards
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Caterpillar extended life coolant

Exhaust System
  • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose

Fuel System
  • Standard open set fuel tank / base supplied
  • Base, formed steel with single wall integral 8-hour fuel tank

Generators and Generator Attachments
  • 12 leads
  • IP23 Protection
  • Voltage regulator (single phase sensing)
  • Tower panel, IP22, bottom cable entry
  • Segregated low voltage (AC/DC) wiring panel
  • Circuit breaker, IEC, 3 pole, mounted in tower panel

Governing System
  • Mechanical governing system

Lube System
  • Lubricating oil
  • Oil drain line with valve

Mounting System
  • Captive linear vibration isolators between base and engine-generator
  • Includes lifting provisions and termination points for coolant

Starting / Charging System
  • 12 Volt battery with rack and cables

General
  • Engine and alternator pre-paint, Caterpillar yellow

C1.1 (60 Hz)Optional Equipment

Alternator Options
  • Coastal insulation protection

Certificates
  • Global certification for CIS
  • European upgrade to STD set for CE certificate

Circuit Breakers
  • 4 Pole circuit breaker
  • Pad-locable breaker device

Control Panel Options
  • EMCP 4.2
  • Volt free contacts for common alarm
  • Volt free contacts for genset running
  • Battery charger
  • Emergency stop with key

Cooling System
  • Coolant heater

Enclosures
  • Sound attenuated enclosure (GALV)
  • Single point lift for enclosure

Fuel System
  • Skidbase for open sets
  • Skidbase for Enclosures
  • DEFRA bunded fuel tank
  • Low fuel level alarm
  • Fuel transfer control
  • 1000 hr extended service interval
  • Base feet

Mounting Options
  • Battery removal
  • Industrial silencer removal
  • Silencer installation kit

Special Test and Inspection
  • PGS test report @1.0 power factor

General
  • Radiator Stone Guard
  • Packing Case - compact set
  • Packing case - canopied set