< Back

View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Producing reliable power from 1940 to 2910 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM25E 50 and 60 Hz, 6, 8 or 9 cylinder, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.

Generator Set Specifications

Units:
Minimum Rating 1940 kWe 1940 kWe Less
Maximum Rating 2910 kWe 2910 kWe Less
Emissions/Fuel Strategy World bank (WB) emission certification stage 1 and 2, Post-emission treatment systems for lower emission requirements available World bank (WB) emission certification stage 1 and 2, Post-emission treatment systems for lower emission requirements available Less
Voltage 3000 to 13800 Volts 3000 to 13800 Volts Less
Frequency At Speed 50 Hz @ 750 / 60 Hz @ 720 50 Hz @ 750 / 60 Hz @ 720 Less
Duty Cycle Prime, Continuous Prime, Continuous Less
Ready To Accept Loads (Preheated/Vented) 40 s 40 s Less
Normal Ramp Up To 100% Load 85 s 85 s Less
Emergency Ramp Up 10% To 100% Load 30 s 30 s Less
Genset Efficiency Up To 43.50% 43.50% Less

Engine Specifications

Engine Model CM25, 4-stroke-engine CM25, 4-stroke-engine Less
Bore 10.04 in 255.0 mm Less
Stroke 15.75 in 400.0 mm Less
Aspiration Turbocharged-aftercooled Turbocharged-aftercooled Less
Engine Rating Range 2010 - 3015 kW 2010 - 3015 kW Less
Configuration 6,8,9 cylinder 6,8,9 cylinder Less
Fuel Type Diesel oil / heavy fuel oil (HFO) / crude oil Diesel oil / heavy fuel oil (HFO) / crude oil Less
Swept Volume 1247.0 in³ 20.4 l/cyl Less
Mean Effective Pressure Up To 396.0 psi 27.3 bar Less
Specific Fuel Oil Consumption (WB I) Up To 0.412 187.0 Less
Specific Fuel Oil Consumption (WB II) Up To 0.412 187.0 Less
Specific Lube Oil Consumption 0.001 0.6 Less

Generator Set Dimensions

Length - Minimum 304.0 in 7717.0 mm Less
Length - Maximum 343.0 in 8713.0 mm Less
Width - Minimum 93.0 in 2357.0 mm Less
Width - Maximum 93.0 in 2357.0 mm Less
Height - Minimum 152.0 in 3866.0 mm Less
Height - Maximum 160.0 in 4066.0 mm Less
Dry Weight - Genset (minimum) 94799.0 lb 43.0 ton (US) Less
Dry Weight - Genset (maximum) 123459.0 lb 56.0 ton (US) Less

CM25E Standard Equipment

Fuel System
  • Circulation module
  • Pre-pressure module
  • Separator module
  • Engine ventilation module (only dual fuel (DF) and gas)
  • Gas valve unit (GVU) (only dual fuel (DF) and gas)
  • Ignition fuel oil module (only dual fuel (DF))

Lubricating Oil System
  • Combined module: cooling water system and lube oil system
  • Lube oil separator module
  • Piping interface module

Cooling Water System
  • Combined module: see lube oil system
  • Cooling water system with radiators
  • Piping interface module

Starting System
  • Starting air compressor module
  • Starting air receiver module

Combustion Air System
  • Air filter - pocket
  • Air filter - oil bath
  • Air filter - pulse

Exhaust System
  • Exhaust gas silencer
  • Selective catalytic reduction (SCR) system
  • Oxidation catalytic (Oxicat) converter system
  • Exhaust gas ventilation module (only dual fuel (DF) and gas)

Control & Monitoring System
  • Local control panel (LCP)
  • Local data panel (LDP) / generator control panel (GCP)
  • Motor control center module (MCC)
  • Engine monitoring package
  • Gas leak detection per cylinder (only dual fuel (DF) and gas)

Mounting System
  • Elastic mounting - genset/engine

Reliable Operation

  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability
  • Control & Monitoring

  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system
  • Ease Of Installation

  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting
  • Ease Of Operation

  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available
  • Intelligent Simplicity

  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time
  • Ease Of Maintenance

  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls
  • Fuel

  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3
  • Emissions

  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available
  • Expertise & Experience

  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)
  • Application Centre

    Explore valuable resources for generator sizing, specification, and training materials. SpecSizer evaluates load types, collects data, and organises it to help you select the generator set that's best for you. Find product comparisons, technical data, product sizing, and more using our technical information portal (TIP) specifically created for consultants, architects, engineers, and owners.

    visit page

    Why Choose Cat® Electric Power?

    Caterpillar offers a comprehensive variety of electric power systems, customised to fit your needs. Our specialised systems deliver high power and performance in industries across the globe. With Caterpillar, you get outstanding manufacturing quality, expert support, and the essential tools and applications to complete any project.

    Learn More About Electric Power

    EMCP 4 Generator Set Controls

    Cat generator sets provide a complete factory-built solution with fully featured standard and advanced controls. Optional accessories enhance the capabilities of the genset package-mounted control system.

    Learn More