TH48-E70
Specifications
Overview
Your operation depends on the power driving it. And your transmission is as crucial to your power solution as the engine. Cat transmissions are proven in the oil and gas industry and widely known for their exceptional power, leading durability, ease of operation, and shifting options.Ideal applications for Cat TH48-E70 transmissions include pressure pumping, kill mud pumps, coil tubing pump support, nitrogen units, and acidizing units. TH48-E70 transmissions are optimized for use with Cat C27 ACERT and C32 ACERT, as well as Cummins QST30 engines.Cat transmissions are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat TH48-E70 oilfield transmission. Gross input power: 1118 bkW (1500 bhp).
| Gross Input Power | 1200.0 BHP 895.0 bkW | More |
| Gross Peak Input Torque | 4422.0 ft-lb 5995.0 N·m | More |
| Rated Input Speed | 2100.0 r/min 2100.0 r/min | More |
| Maximum Turbine Torque | 7442.0 ft-lb 5489.0 N·m | More |
| Gear Type | Straight spur planetary Straight spur planetary | More |
| Gears | 7F/0R 7F/0R | More |
| 1F Gear Ration | 6.16 6.16 | More |
| 2F Gear Ration | 4.52 4.52 | More |
| 3F Gear Ration | 3.33 3.33 | More |
| 4F Gear Ration | 2.47 2.47 | More |
| 5F Gear Ration | 1.82 1.82 | More |
| 6F Gear Ration | 1.36 1.36 | More |
| 7F Gear Ration | 1.00 1.00 | More |
Equipment
TH48-E70 Standard Equipment
Cat Engines for Optimized Power Train
- Cat C27 ACERT
- Cat C32 ACERT
- Cummins QST30 (950-1500 bhp ratings)
Transmission Rotation
- Input rotation — counterclockwise
- Output rotation — counterclockwise(as viewed from rear)
Torque Converter
- Integral torque converter
- Series
- Stall torque ratio
Clutches
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
Installation Connections
- 2 oil cooler lines
- 1 electrical connector
- 1 pump
Oil System
- Cat Transmission/Drive Train Oil-4 (TDTO)
- Sump oil temperatures
- Hydraulic fill capacity — Approx. 114 L (30 gal), subject to cooler size, lines, and installation.
- Filter Type — 6 micron synthetic, cartridge remote mount
Mountings
- Input connection (flywheel) — SAE #0
- Output connections (yoke) — GWB 390.60/GWB 390.65
- Structural application subject to Caterpillar approval
Control System
- Electronic Control Unit (ECU)
- Electronic data link, SAE J1939
- Electrical system 24V
Power Take-Off Drives
- Location
- Mounting type: SAE 8 bolt (J704)
- Rated power
