You don't need to be a hammer expert as our expertise is on call for you. Built-in features like automatic shut-off protect your equipment from poor operation techniques or the occasional mistake. Internal buffering and integral silencing keeps the noise and power on the job, and out of the cab. If you can run an excavator, you can run a Cat hammer like a pro.
Daily greasing is a snap, with one basic point at a convenient height. With the addition of a Cat autolube, the hammer is greased while it runs – not just saving you time, but protecting your investment. Rotate or change the bushing in less than an hour. Gas checks are annual, and quickly accomplished without dismounting the hammer. You can do this yourself… or your Cat dealer can provide comprehensive support on your schedule.
Add a hammer-mounted autolube system to simplify maintenance and improve reliability on more than just a single machine, making it an ideal choice for large production or demolition companies and rental fleets.
Want to learn more about your hammer? Operating and maintenance videos are available online or through your local Cat dealer. Working away from home? Not a problem. Be confident no matter where your job takes you as the global network of Cat dealer is there with not only equipment support and service, but also with the hammer parts and service you may need as well. No other manufacturer can offer you the same.
The H180E S wear package hammer is a valuable asset in quarries and bridge demolition, as well as the largest-scale demolition projects. The additional factory installed wear package keeps you productive, while protecting your investments.
|Impact Energy Class||12000.0 ft·lbf 16720.0 J||More Less|
|Blows per Minute||275-450 275-450||More Less|
|Maximum Operating Pressure||2321.0 psi 16000.0 kPa||More Less|
|Minimum Operating Pressure||2176.0 psi 15000.0 kPa||More Less|
|Minimum Carrier Weight||92600.0 lb 42003.0 kg||More Less|
|Maximum Carrier Weight||167600.0 lb 76022.0 kg||More Less|
|Minimum Rated Flow||58.0 gal/min 220.0 l/min||More Less|
|Maximum Operating Weight||9570.0 lb 4340.0 kg||More Less|
|Maximum Rated Flow||79.0 gal/min 300.0 l/min||More Less|
|Minimum Operating Weight||8798.0 lb 3990.0 kg||More Less|
|Tool Shaft Diameter||7.07 in 179.5 mm||More Less|