986K Large Wheel Loader - Block Handler Arrangement | Cat

Engine

Net Power	373 HP 278 kW
Engine Model	Cat® C15 ™ Cat® C15 ™
Emissions	U.S. EPA Tier 4 Final/EU Stage IV, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage IV, or China Nonroad Stage III and Brazil MAR-1 and equivalent to U.S. Tier 3 and EU Stage IIIA
Gross Power - ISO 14396	449 HP 335 kW
Peak Power Speed - 1,600 rpm - SAE J1995	456 HP 340 kW
Peak Power Speed - 1,600 rpm - SAE J1995 (DIN)	462 HP 340 kW
Peak Power Speed - 1,600 rpm - ISO 14396	449 HP 335 kW
Peak Power Speed - 1,600 rpm - ISO 14396 (DIN)	455 HP 335 kW
Rated Speed - 2,000 rpm - EEC 80/1269	373 HP 278 kW
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)	378 HP 278 kW
Rated Speed - 2,000 rpm - ISO 9249	373 HP 278 kW
Rated Speed - 2,000 rpm - ISO 9249 (DIN)	378 HP 278 kW
Rated Speed - 2,000 rpm - SAE J1349	373 HP 278 kW
Rated Speed - 2,000 rpm - SAE J1349 (DIN)	378 HP 278 kW
Bore	5.4 in 137 mm
Stroke	6.75 in 171.5 mm
Displacement	927 in³ 15.2 l
Peak Torque - 1,200 rpm - SAE J1995	1778 lb/ft 2411 N·m
Torque Rise	16% 16%

Operating Specifications

Operating Weight

116688 lb 52929 kg

Buckets

Bucket Capacities

5.4 m³ (7 yd³) 5.4 m³ (7 yd³)

Transmission

Transmission Type	Cat-Planeten-Lastschaltgetriebe Cat-Planeten-Lastschaltgetriebe
Forward - 1	5 mile/h 7.3 km/h
Forward - 2	8 mile/h 12.2 km/h
Direct Drive - Forward 2	8 mile/h 12.7 km/h
Direct Drive - Forward 3	14 mile/h 22 km/h
Direct Drive - Forward 4	24 mile/h 39 km/h
Reverse - 1	5 mile/h 7.6 km/h
Reverse - 2	8 mile/h 13.6 km/h
Direct Drive - Reverse 2	9 mile/h 14.1 km/h
Direct Drive - Reverse 3	16 mile/h 25 km/h
Direct Drive - Reverse 4	25.4 mile/h 40.8 km/h

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit	Load Sense Load Sense
Lift/Tilt System - Pump	2 × 110 cc variable displacement 2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm	123 gal/min 470 l/min
Relief Valve Setting - Lift/Tilt	4050 psi 27900 kPa
Lift Cylinder - Bore	7.5 in 190 mm
Lift Cylinder - Stroke	45 in 1138 mm
Tilt Cylinder - Bore	6.7 in 170 mm
Tilt Cylinder - Stroke	22.4 in 568 mm

Hydraulic Cycle Times

Rack Back	4.5 s 4.5 s
Raise	8.5 s 8.5 s
Dump	3 s 3 s
Lower	4.9 s 4.9 s
Lower Float Down	4.3 s 4.3 s
Total Hydraulic Cycle Time	15.8 s 15.8 s

Service Refill Capacities

Fuel Tank	116 gal (US) 438 l
Cooling Systems	26 gal (US) 100 l
Crankcase	9 gal (US) 34 l
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only)	6 gal (US) 23 l
Transmission	20 gal (US) 75 l
Axle Oil - Differentials and Final Drives - Front	49 gal (US) 186 l
Axle Oil - Differentials and Final Drives - Rear	45 gal (US) 170 l
Hydraulic System Factory Fill	87 gal (US) 330 l
Hydraulic System - Tank Only	34 gal (US) 130 l

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Axles

Front	Fixed Fixed
Rear	Trunnion Trunnion
Oscillation Angle	±12.5° ±12.5°
Oscillation Angle - Chain Arrangement	±8.5° ±8.5°

Brakes

Brakes

ISO 3450: 2011 ISO 3450: 2011

Hydraulic System - Steering

ISO 5010:2007 - Steering System - Circuit	Load Sense Load Sense
ISO 5010:2007 - Steering System - Pump	Piston, variable displacement Piston, variable displacement
ISO 5010:2007 - Maximum Flow at 1,400 rpm	52 gal/min 200 l/min
ISO 5010:2007 - Steering Cutoff Pressure	4000 psi 27600 kPa
ISO 5010:2007 - Total Steering Angle	70° 70°

Operator's Cab

ROPS/FOPS

ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Sound Performance - Standard

Operator Sound Level (ISO 6396)	72 dB(A) 72 dB(A)
Machine Sound Level (ISO 6395)	112 dB(A) 112 dB(A)
Note	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Sound Performance - Suppression

Operator Sound Level (ISO 6396)	72 dB(A) 72 dB(A)
Machine Sound Level (ISO 6395)	110 dB(A) 110 dB(A)
Note	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Ground to Top of ROPS	13.5 ft 4100 mm
Ground to Top of Exhaust Stacks	13.3 ft 4060 mm
Ground to Top of Hood	10.7 ft 3270 mm
Ground to Center of Rear Axle	3.2 ft 978 mm
Ground to Fuel Tank Clearance	2.3 ft 691 mm
Ground to Lower Hitch Clearance	1.5 ft 459 mm
Reach at Maximum Lift	8 ft 2437 mm
Clearance at Maximum Lift	10.7 ft 3259 mm
B-Pin Height at Maximum Lift	15 ft 4566 mm
Maximum Overall Height, Bucket Raised	20.9 ft 6359 mm
Rear Axle Center Line to Bumper	10.3 ft 3132 mm
Wheel Base	12.5 ft 3810 mm
Maximum Overall Length	35 ft 10671 mm
Front Axle Centerline to Bucket Tip	12.2 ft 3729 mm

Dimensions (Approximate) - Quick Coupler and Fork

Ground to Top of ROPS	13.5 ft 4100 mm
Ground to Top of Exhaust Stacks	13.3 ft 4060 mm
Ground to Top of Hood	10.7 ft 3270 mm
Ground to Center of Rear Axle	3.2 ft 978 mm
Ground to Fuel Tank Clearance	2.3 ft 691 mm
Ground to Lower Hitch Clearance	1.5 ft 459 mm
B-Pin Height at Maximum Lift	15 ft 4566 mm
Rear Axle Center Line to Bumper	10.3 ft 3132 mm
Wheel Base	12.5 ft 3810 mm
Maximum Overall Length	35.4 ft 10776 mm
Front Axle Centerline to Bucket Tip	12.6 ft 3834 mm

Large Wheel Loaders 986K Block Handler Arrangement Durability for your toughest loading conditions

Overview

Features At A Glance

Robust Structures

Lift Arms

Front Linkage

Cat® Planetary Powershift Transmission

Cat C15 Engine

Transmission Neutralizer Pedal

Load Sense Hydraulics

Electro Hydraulic Controls

Steering System

Filtration System

Entry and Exit

Cat Comfort Series III Seat

Control Panel

Environment

Information Display

Cat production measurement system

Tire Pressure Monitoring System

Product Link™ Cat Elite

Machine Access

Visibility

Operator Environment

We can help you succeed by ensuring your 986K has design features to reduce your downtime.

Legendary Cat Dealer Support

Reducing Impact to the Environment

Counter Weight

Quick Coupler Activation

Application Specific Tilt and Lift Cylinders

Ride Control

Block Handler Front Linkage

Optimized Z-bar Linkage

Block Handling Tools

Block Handling Quick Coupler

Forks

Rock Buckets

Product Specifications for 986K Block Handler Arrangement

Engine

Operating Specifications

Buckets

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Service Refill Capacities

Air Conditioning System

Axles

Brakes

Hydraulic System - Steering

Operator's Cab

Sound Performance - Standard

Sound Performance - Suppression

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

986K Block Handler Arrangement Standard Equipment

NOTE

ELECTRICAL

OPERATOR ENVIRONMENT

POWER TRAIN

OTHER

986K Block Handler Arrangement Optional Equipment

NOTE

POWER TRAIN

MISCELLANEOUS ATTACHMENTS

OPERATOR ENVIRONMENT

See how 986K Block Handler Arrangement compares against frequently compared products.

Tools And Expert Help At Every Turn

Payment Calculator

Current Offers

Rental Options

Used Options

Find Dealer

assignment Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business.

Media Gallery

Photos

Videos

360 View

All

Compatible Technology and Services

Product Brochures and More Are Ready to Download!