CN1566 Electric Motor

< Back

Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.


Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

Electric Motor Specifications

Mounting Designation F1 or F2 F1 or F2 Less
Voltage/Frequency 4000V ± 10%/60 Hz 4000V ± 10%/60 Hz Less
Electric Motor Type Squirrel Cage Induction Motor Squirrel Cage Induction Motor Less
Type of EX-Protection Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) Less
Full Load Speed 1189.0 r/min 1189.0 r/min Less
Shaft 5.1 in 130.0 mm Less
Standards NEMA MG1 NEMA MG1 Less
Connection of Stator Winding Star Star Less
Locked Rotor Torque 60% 60% Less
No Load Current 67 Amps 67 Amps Less
Locked Rotor Amps 500% Code E 500% Code E Less
Service Factor 1.15 SF (1.0 VFD) 1.15 SF (1.0 VFD) Less
Enclosure Type/Method of Cooling WP-II WP-II Less
Duty Continuous Continuous Less
Temperature Rise Class B at rated load Class B at rated load Less
Maximum Ambient Temperature 104.0 °F 40.0 °C Less
Maximum Altitude - Before Derate 3000.0 ft 1000.0 m Less
Rated Torque 6625.0 lb/ft 8982.0 N·m Less
Full Load Current 202 Amps 202 Amps Less
Insulation Class F Class F Less

CN1566 Electric Motor Standard Equipment

  • Bearing RTDs for temperature monitoring
  • Insulated non-drive end bearings to reduce bearing currents
  • Anti-friction on 1500 hp (optional)

  • Designed for minimal vibration
  • Dynamic balancing at full operational speed
  • Fabricated copper squirrel cages
  • Oversized, forged, keyless shaft
  • AISI 4140/DIN42CrMo4 shaft

  • Radial air ducts ensure uniform and efficient cooling
  • Vacuum pressure impregnated with specially formulated epoxy resin
  • 2X RTDS per Phase
  • Space heater
  • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges