< Back

Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Equipped with a Cat® C7 engine, direct-drive powershift transmission, and load-sensing hydraulics and Cat technology solutions, the 160K motor grader takes on your grading work with power, control, comfort and productivity.

Engine

Units:
Base Power (1st Gear) - Net 186.0 HP 139.0 kW Less
Engine Model Cat C7 ACERT Cat C7 ACERT Less
Displacement 439.0 in³ 7.2 l Less
Bore 4.1 in 105.0 mm Less
Stroke 5.0 in 127.0 mm Less
High - Ambient Capability 122.0 °F 50.0 °C Less
Note (2) Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Less
Derating Altitude 10000.0 ft 3048.0 m Less
Base Power - Net 186.0 HP 139.0 kW Less
Note (3) Maximum torque measured at 1,000 rpm in gears 4-8. Maximum torque measured at 1,000 rpm in gears 4-8. Less
High Ambient - Fan Speed - Maximum 1560.0 r/min 1560.0 r/min Less
Speed at Rated Power 2000.0 r/min 2000.0 r/min Less
VHP Range - Net 139-154 kW (186-206 hp) 139-154 kW (186-206 hp) Less
Torque Rise 46% 46% Less
Number of Cylinders 6 6 Less
Maximum Torque 794.0 ft-lb 1076.0 N·m Less
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Less

Moldboard

Blade Width 14.0 ft 4.3 m Less
Arc Radius 16.3 in 413.0 mm Less
Throat Clearance 3.5 in 90.0 mm Less
End Bit - Thickness 0.6 in 16.0 mm Less
End Bit - Width 6.0 in 152.0 mm Less
Moldboard - Thickness 1.0 in 25.0 mm Less
Cutting Edge Width 8.0 in 203.0 mm Less
Moldboard - Height 27.0 in 686.0 mm Less
Cutting Edge Thickness 0.6 in 16.0 mm Less

Blade Range

Moldboard Sideshift - Right 37.1 in 943.0 mm Less
Maximum Depth of Cut 31.1 in 790.0 mm Less
Circle Centershift - Left 29.6 in 752.0 mm Less
Moldboard Sideshift - Left 33.5 in 851.0 mm Less
Maximum Lift Above Ground 17.8 in 452.0 mm Less
Blade Tip Range - Forward 40° 40° Less
Circle Centershift - Right 28.7 in 728.0 mm Less
Maximum Shoulder Reach Outside of Tires - Right 89.0 in 2261.0 mm Less
Blade Tip Range - Backward Less
Maximum Shoulder Reach Outside of Tires - Left 87.5 in 2223.0 mm Less

Frame

Front Axle - Wheel Lean - Left/Right 18° 18° Less
Circle - Outer Diameter 61.1 in 1553.0 mm Less
Front Axle - Total Oscillation per Side 32° 32° Less

Weights

Gross Vehicle Weight - Typically Equipped 39035.0 lb 17706.0 kg Less
Operating Weight - Maximum - Total 50420.0 lb 22870.0 kg Less
Gross Vehicle Weight - Base - Rear Axle 23646.0 lb 10726.0 kg Less
Gross Vehicle Weight - Typically Equipped - Front Axle 11324.0 lb 5136.0 kg Less
Gross Vehicle Weight - Typically Equipped - Total 39035.0 lb 17706.0 kg Less
Gross Vehicle Weight - Base - Front Axle 9831.0 lb 4459.0 kg Less
Operating Weight - Maximum - Rear Axle 32771.0 lb 14865.0 kg Less
Operating Weight - Maximum - Front Axle 17647.0 lb 8005.0 kg Less
Gross Vehicle Weight - Base - Total 33477.0 lb 15185.0 kg Less
Gross Vehicle Weight - Typically Equipped - Rear Axle 27711.0 lb 12570.0 kg Less
Note (2) Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Less
Note (1) Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. Less

PERFORMANCE AND PRODUCTIVITY

POWERFUL EFFICIENCY

SIMPLE TO OPERATE

SAVE MAINTENANCE TIME

HEAVY DUTY CONSTRUCTION

WORK IN COMFORT

PRODUCTIVITY WITH TECHNOLOGY

BUILT-IN SAFETY FEATURES

160K Standard Equipment

Electrical
  • Alternator, 115 ampere
  • Backup alarm, reversing lights
  • Batteries, maintenance free 750 CCA
  • Common fuse block
  • Electrical system, 24 volt
  • Horn, electric
  • Indication display
  • Lights, stop and tail
  • Motor, starting
  • Product Link ready
  • Working lights

Operator Environment
  • Accelerator
  • Control console, adjustable
  • Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)
  • Guard rails, operator station
  • Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)
  • Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)
  • Key start/stop switch
  • Meter, hour
  • Power steering, hydraulic
  • Seat, vinyl-covered static
  • Seat belt
  • Steering wheel, tilt, adjustable
  • Storage area, cooler/lunch box
  • Throttle, electronic control

Power Train
  • Air cleaner, dry type radial seal with service indicator and automatic dust ejector
  • Air to air after cooler (ATAAC)
  • Blower fan
  • Brakes, oil disc, four-wheel air actuated
  • Differential with lock/unlock
  • Eco mode
  • Engine idle shutdown
  • Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control - Emits equivalent to Tier 3/Stage IIIA
  • Fuel water separator
  • Muffler, under hood
  • Next gen filter design
  • Parking brake, multi-disc, sealed and oil cooled
  • Prescreener
  • Priming pump fuel, resiliently mounted
  • Sediment drain, fuel tank
  • Tandem drive
  • Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection
  • VHP (Variable Horse Power)

Other Standard Equipment
  • Blade Float
  • Bumper, rear
  • CD ROM Parts Book
  • Circle drive slip clutch
  • Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel
  • Doors, engine compartment
  • Drawbar, 6 shoe, replaceable nylon composite wear strips
  • End bits, 16 mm (5/8 in) DH-2 steel
  • Frame, articulated with safety lock
  • Fuel tank, 305 L (80.6 gal)
  • Ground level engine shutdown
  • Link bar, 7 position
  • Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip
  • Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip
  • SOS ports, engine, hydraulic, transmission and cooling
  • Toolbox with padlock
  • Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Antifreeze
  • Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

160K Optional Equipment

Guards
  • Guard, transmission

Operator Environment
  • Air conditoiner with heater
  • Heater, cab

Cab/Canopy
  • Cab, ROPS
  • Cab, Non-ROPS
  • Canopy, ROPS
  • Seat, vinyl adjustable
  • Seat, cloth, contour
  • Fan, defroster, front window
  • Fan, defroster, rear window
  • Sun shade, rear
  • Wiper/washer, rear
  • Wipers, intermittent front
  • Mirrors, dual inside
  • Mirror, heated
  • Mirrors, outside mounted
  • Power port, 12V accessory
  • Radio, Bluetooth
  • Radio ready entertainment
  • Rear vision camera
  • Tachometer/speedometer

Ripper/Scarifier
  • Ripper/scarifier, rear mounted
  • Scarifier, mid mounted, V-Type

Lights
  • Bar mounted, low directional and headlights
  • Beacon light
  • Combination headlight
  • Cab and bar mounted, high, directional, headlights and work lights
  • Rear facing cab lights

Power Train
  • Autoshift

Other Attachments
  • Cross Slope Indicate
  • Product Link
  • Product Link Elite
  • Snow Wing Mounting, frame-ready
  • AccuGrade ARO
  • Dryer, air
  • Push plate, counterweight
  • Accumulator, blade lift
  • Battery, extreme duty (1,400 CCA)
  • Ether, starting aid
  • Heater, engine coolant, 220V
  • Circle Saver
  • Ripper tow package

Hydraulics
  • Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)
  • Hydraulic arrangements with one ormore additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing

Blades, Moldboards
  • Blade, 3658 mm x 610 mm x 22 mm (12' x 24" x 7/8") with hydraulic sideshift and tip and 5/8" end bits cutting edge 203 mm x 19 mm (8" x 3/4") - for use with 4.3 m (14') blade
  • End bits, overlay, reversible pair for use with 203 mm (8") cutting edges