C18 (50 Hz) China Non Road

< Back

Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

C18 (50 Hz) China Non RoadStandard Equipment

Air System
  • Air Cleaner,light duty
  • Turborcharger

Control Panels
  • EMCP 4.2

Cooling System
  • Radiator and cooling fan with guard
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Caterpillar Extended Life Coolant

Exhaust System
  • Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use; shipped loose

Fuel System
  • Standard open set fuel tank / base supplied Base, formed steel with single wall integral 8-hour fuel tank

Generator and Attachments
  • A frame generator - IP21 Protection
  • Optional LC frame generator - IP23 Protection,
  • Integrated Voltage Regulator
  • Power center, IP22
  • Segregated low voltage (AC/DC) wiring panel
  • Mandatory Option Rear circuit breaker, IEC, 3 pole, mounted in power center

Governing System
  • Cat Electronic Governor (ADEM A4)

Lube System
  • Lubricating oil
  • Oil drain valves

Mounting System
  • Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Starting/Charging
  • 24 Volt battery with rack and cables

General
  • Engine and alternator pre-paint, Caterpillar Yellow

C18 (50 Hz) China Non RoadOptional Equipment

Certifications
  • European Certifications - EU certificate of conformance
  • Global

Air Inlet System
  • Single element air cleaner
  • Dual element air cleaner

Circuit Breakers
  • 3 Pole (IEC-100% rated) - package mounted
  • 4 Pole (IEC-100% rated) - package mounted
  • 3 Pole (IEC-100% rated) - motorized
  • 4 Pole (IEC-100% rated) - motorized
  • Pad-lockable device
  • Power terminal strips

Control Systems
  • Volt free contacts
  • Control panel protective devices
  • Local alarm modules
  • Remote annunciator modules

Cooling System
  • Radiator duct flange

Enclosures
  • Sound attenuated enclosures

Exhaust System
  • Engine mounted muffler
  • Mufflers, End in/ End out
  • Flange groups; 8 and 10 inch weld flanges and gaskets
  • Elbow Kit
  • Manifold and turbocharger guard

Fuel System
  • Integral -Duel wall fuel tank bases
  • Manual fuel transfer system
  • Fuel transfer system

Generator and Attachments
  • Ingress protection
  • Permanent magnet excitation
  • Space heaters
  • A frame oversize generator
  • A frame CIP generator
  • LC frame generator
  • LC frame oversize generator
  • LC frame CIP generator

Lube System
  • Manual sump pump

Mounting System
  • Narrow skid base

Starting / Charging System
  • 5 Amp battery charger
  • Battery disconnect switch
  • Jacket water heater

Overview

Producing reliable power from 455 kVA to 600 kVA at 50 Hz, our C18 diesel generator sets are made to meet your standby and prime applications. Each is designed to ISO 8528-5 transient response requirements and built accept 100 percent rated load in one step. Our C18 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certified. Seismic certification is also available for select models, so you can deliver power despite disturbances. Our integrated control system, including ATS and switchgear ensure a consistent power supply and connection to your fleet through on-site and remote monitoring options. We offer a wide range of EMCP 4 control panel options, with a simple screen display, consolidating all your management and diagnostics tools. The EMCP 4.4 controller provides on package paralleling capability, allowing you to use multiple generator sets to power your facility, providing added capacity and redundancy. We've made our generator sets adaptable to your demands with a broad range of accessories and bolt-on system expansion attachments. Find flexible packaging to fit your spatial restrictions and environmental conditions. Even choose UL 2200 and CSA certified package options for added safety.

Generator Set Specifications

Units:
Minimum Rating 500 ekW (550 kVA) 500 ekW (550 kVA) Less
Maximum Rating 600 ekW (700 kVA) 600 ekW (700 kVA) Less
Voltage 208 to 600 Volts 208 to 600 Volts Less
Frequency 50 Hz 50 Hz Less
Speed 1500 RPM 1500 RPM Less

Generator Set Configurations

Emissions/Fuel Strategy Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards Less

Engine Specifications

Engine Model C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel Less
Bore 145 mm (5.71 in) 145 mm (5.71 in) Less
Displacement 18.13 L (1106.36 in3) 18.13 L (1106.36 in3) Less
Stroke 183 mm (7.2 in) 183 mm (7.2 in) Less
Compression Ratio 14.5:1 14.5:1 Less
Aspiration Air to Air Aftercooled Air to Air Aftercooled Less
Governor Type Adem™A4 Adem™A4 Less
Fuel System Electronic unit injection Electronic unit injection Less

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
  • Seismic Certification

  • Seismic Certification available.
  • Anchoring details are site specific, and are dependent on many factors such as generator set size, weight, and concrete strength.
  • IBC Certification requires that the anchoring system used is reviewed and approved by a Professional Engineer
  • Seismic Certification per Applicable Building Codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007, CBC 2010
  • Pre-approved by OSHPD and carries an OSP-0321-10 for use in healthcare projects in California