M 25 C Generator Set

M 25 C

Minimum Rating
1669 kWe (2088 kVA)
1669 kWe (2088 kVA)
Maximum Rating
2877 kWe (3600 kVA)
2877 kWe (3600 kVA)
Configuration
6,8,9 Cylinder
6,8,9 Cylinder

Product Specifications for M 25 C

Generator Set Specifications

Engine Specifications

Generator Set Dimensions and Weights - Dependent on Generator Type

M 25 C Standard Equipment

Air Inlet System

  • Air intake silencer / filter

Control System

  • Load sharing unit (for multiple engine plant only)
  • Protection system
  • Serial link interface (MODbus / canbus)
  • Speed governor

Cooling System

  • Electric cooling water preheater
  • HT cooling water pump (engine driven)
  • 2-stage charge air cooler

Exhaust System

  • Exhaust gas expansion joint
  • Exhaust gas insulated manifolds
  • Turbocharger at counter-flywheel end

Fuel System

  • Fuel circulating pump (attached / for MDO/MGO only)
  • Fuel indicator filter
  • Fuel pressure valve (fitted / for MDO/MGO only)

Instrumentation

  • Control push buttons and lamps
  • Emergency stop lever
  • Local control panel
  • Pressure and temperature indicator

Lube System

  • Lube oil cooler (separate)
  • Lube oil pump (engine driven)
  • Lube oil self-cleaning filter
  • Pre-lubricating pump (electric driven / fitted on base frame)
  • Oil sump in base frame
  • Pressure regulating valve

Mounting System

  • Flexible pipe connections
  • High flexible coupling
  • Resilient mounting on base frame

Starting System

  • Electrical barring device
  • Starting air valve

General

  • Engine, flex. coupling and generator mounted on a common base frame
  • Flywheel cover
  • Lifting device (rental)
  • Torsional Vibration Calculation (TVC)

M 25 C Optional Equipment

Air Inlet System

  • Air inlet shut-off valve
  • Air intake transition piece
  • Expansion joint
  • Silencer / filter

Control System

  • Air injection control (for better load request)
  • Electronic speed governor
  • Engine alarm system
  • Remote indicators (start air pressure, engine speed, etc.)
  • Starter for electric driven pumps
  • 24 DC UPS

Cooling System

  • CW piping for generator cooliing on base frame
  • CW piping for lubricating oil cooler on base frame
  • FW/SW plate cooler
  • HT cooling water pump (electric driven)
  • HT temperature control valve fitted on base frame
  • LT cooling water pump (electric driven)
  • Sea water cooling pump (electric driven)
  • Temperature control valve

Exhaust System

  • Silencer (with or without spark arrester)

Fuel System

  • Fuel oil cooler
  • HFO final preheater
  • HFO pressure regulating valve
  • HFO self-cleaning automatic filter
  • HFO supply and booster pumps (electric driven)
  • HFO treatment and supply modules
  • HFO viscosity control device
  • Mixing tank

Lube System

  • Lube oil centrifuge
  • Lube oil cooler fitted on base frame
  • Lube oil pump (electrical driven)
  • Lube oil treatment and combined modules
  • Temperature control valve fitted on base frame

Mounting System

  • Double resilient mounting (engine and base frame)

Starting System

  • Starting air compressor
  • Starting air receiver

General

  • Engine PTO coupling
  • Generator customer supply
  • PTO shaft on counter-flywheel side

See how M 25 C compares against frequently compared products.

Tools And Expert Help At Every Turn

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business. To get exclusive access to more awesome content, sign up below. Or for instant access, you can skip this form.


Check out current offers for the M 25 C

View More Offers