S320B

< Back

Financing & Insurance
See our Offers
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Compact and powerful, the S320B excells on ultra-high reach machines. Three-sixty degree rotation aligns the jaws with structural steel at almost any angle.

Shear Forces

Units:
Throat Force 417.0 Sh Ton 3706.0 kN Less
Apex Force 178.0 Sh Ton 1583.0 kN Less
Tip Force 100.0 Sh Ton 892.0 kN Less
Cycle Time - Open 4.0 s 4.0 s Less
Cycle Time - Close 3.0 s 3.0 s Less

Dimensions

Weight - Boom Mount 5666.0 lb 2570.0 kg Less
Weight - Stick Mount 4774.0 lb 2165.0 kg Less
Jaw Opening 16.0 in 409.0 mm Less
Jaw Depth 18.0 in 459.0 mm Less
Jaw Width - Moving 3.0 in 90.0 mm Less
Jaw Width - Fixed 12.0 in 304.0 mm Less
Length 110.0 in 2792.0 mm Less
Height 53.0 in 1340.0 mm Less
Width 31.0 in 792.0 mm Less

Hydraulic Requirements

Cutting Circuit - Maximum Relief Pressure 5075.0 psi 35000.0 kPa Less
Cutting Circuit - Maximum Flow 40.0 gal/min 150.0 l/min Less
Rotation Circuit - Maximum Relief Pressure 2030.0 psi 14000.0 kPa Less
Rotation Circuit - Maximum Flow 10.6 gal/min 40.0 l/min Less

Jaw Design

Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.

360-degree Rotation

Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.

Reversible Knives

The four main, side and front knives are fully reversible with four effective cutting edges.

Easy Maintenance

Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.

Protected Cylinder

Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.

Completely Cat

Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.