Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.
- Full box-section rear frame resists torsional shock and twisting forces.
- Castings in the engine end frame are used in high stress areas to spread high loads.
- Cast axle pivot mounting areas better disperse stress loads for increased structural integrity.
- 90 percent of the machine structure is robotically welded to provide highly consistent welds and increased strength.
Your key to maximum uptime and productivity is our purpose built front and rear frames.
- Full box-section frames absorb torsional forces during dozing, maintaining alignment for hitch pins and drive line.
- Spread hitch design features double tapered roller bearings and hardened pins that resist both horizontal and vertical loads.
- Enhance strength in key pin areas through the use of one piece castings.
Push Beam and Push Arm Dozer Arrangement
To ensure long life and reliability, solid one piece push beams are through-width, not merely attached to the side of the frame. In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.
Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS)
Lower your cost per ton utilizing advanced ICTC and RCS for modulated rimpull.
- Reduce tire slippage and wear by modulating rimpull from 100 to 25 percent while depressing left pedal. After 25 percent rimpull is achieved the left pedal applies the brake.
- Reduce the potential for wheel slippage without reducing hydraulic efficiency with RCS.
- Improve fuel efficiency in certain applications with our lock-up clutch torque converter providing direct drive.
Steering and Transmission Integrated Control System (STIC™)
Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.
- Simple side-to-side motion turns machine right or left, minimizing operator movements.
- Easy to operate finger controlled gear selection.
- Smoother, faster cycles and less operator fatigue through the use of low effort integrated controls.
Cat Planetary Powershift Transmission
Building your success begins with a best-in-class transmission designed specifically for mining applications.
- Consistent, smooth shifting and efficiency through integrated electronic controls.
- Long life and reliability through heat treat gear and metallurgy.
- Three forward and three reverse speeds to match your application.
Cat C32 ACERT Engine
Durability and efficiency at the heart of your 854K comes from the Cat C32 engine with ACERT technology. Optimum performance is built in through the use of a 12-cylinder, four-stroke design.
- On-demand performance through the use of turbochargers and aftercoolers.
- High Torque Rise – 33% torque rise ensures high lugging forces during dozing.
- Extended engine life through lower rpm ratings.
- Quick engine response through the use of electronic engine controls.
- U.S. EPA Tier 4 Final rating available for highly regulated regions.
Electro Hydraulic Controls
Operators increase productivity with our responsive implements feature.
- Operate comfortably through electronically controlled hydraulic cylinder stops.
- Handle easy-to-use soft detent controls.
Improve operator efficiency by matching the speed of the blade movement to your application.
- Three different speeds: Standard, Fine and Fast.
- Easily configured through the advisor display.
- Only affects blade raise and lower functions.
Confident loader operation starts with precise machine control enabled by the 854K's load sensing hydraulic steering system.
- Increase efficiency with our variable displacement piston pumps.
- Achieve precise positioning for easy loading in tight areas with 43 degrees of steering articulation.
- Enhance operator comfort with integrated steering and transmission control functions.
Benefit from extended performance and reliability of your hydraulic system with our advanced filtration system.
- Lift/tilt case drain filters.
- Lift/tilt high pressure screens.
- Steering case drain filters.
- Steering high pressure screens.
- Hydraulic case drain filters.
- Front pump drive lube filter.
- Front and rear brake oil screens.
Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.
Entry and Exit
Enter and exit the cab easily and safely with these newly designed, ergonomic features.
- Two side access points.
- Fold up STIC steer/arm rest.
- Reduced access stairway angles.
Cat Comfort Series III Seat
Enhance comfort and reduce operator fatigue with Cat Comfort Series III seat.
- High back design and extra thick, contoured cushions.
- Air suspension system.
- Easy-to-reach seat levers and controls for six way adjustments.
- Seat-mounted implement pod and STIC steer that moves with the seat.
- 76 mm (3 in) wide retractable seat belt.
Safely train other operators in comfort with our standard training seat.
- 76 mm (3 in) wide, retractable seat belt.
- Fold-down design with molded drink tray and storage.
Your operator's productivity is enhanced with our clean, comfortable cab environment.
- Experience reduced vibrations from viscous cab mounts and seat air suspension.
- Maintain desired cab temperature with automatic temperature controls.
- Pressurized cab with filtered air.
- Sound level reduced to a quiet 71 dB(A).
The 854K electronic systems have been completely integrated to function as one machine. This integration creates a smart machine and more informed operator, maximizing the productivity of both.
We have worked hard to help our customers and operators perform at their best through our Vital Information Management System (VIMS 3G).
- Easy-to-view Advisor Display features a large screen.
- Intuitive operation and easy navigation with our enhanced user interface.
- Decrease service time by keeping operators informed about machine system malfunction or operation.
Operator comfort begins with personalized machine feature settings. Through our Advisor Display, an operator can instantly recall personalized profiles.
- Store up to 10 separate operator profiles through Advisor.
- Decrease setup time between operators by recalling personalized screen layouts.
Cat MineStar System is the industry's broadest suite of integrated mine operations and mobile equipment management technologies, configurable to suit your operation's needs. Its capability sets – Fleet, Terrain, Detect, Health and Command – contain a range of technologies that let you manage everything from fleet assignment and condition monitoring to remote and autonomous control. The 854K can take advantage of many of these advanced technologies, some of which are standard out of the factory.
Fleet provides comprehensive, real-time machine tracking, assignment and productivity management, giving you a comprehensive overview of all operations from anywhere in the world.
Terrain for Loading
Terrain with your 854K enables high-precision management of loading operations through the use of guidance technology. It increases 854K's productivity and provides you real-time feedback for improved efficiency.
Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment.
Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.
We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.
- Wider stairs with reduced stair angles provide a safe means for operators getting on and off the 854K.
- Walkways with non-skid surfaces and integrated lock out/tag out points are designed into the service areas.
- Windshield cleaning platforms provide safe and convenient access for the operator.
- Maintain three points of contact at all times through ground level or platform accessible service areas.
- Emergency egress access.
- Optional pull-down window shade and optional heated mirrors ensure extended visibility for safe operation.
- Cat Detect with Object Detection System (rearview camera and radar) or Vision (rearview camera) option increases operator awareness around the machine.
- Standard HID lights provide excellent workspace visibility.
- Cab mounted LED warning beacons.
- Low vibrations to the operator with viscous cab mounts and seat air suspension.
- Low interior sound levels.
- Operator training seat facilitates safe new operator training.
- Standard 76 mm (3 in) seat belts on the operator seat and operator training seat.
Powered Access System
The Cat powered access system allows easier access to the primary stairs by improving ingress and egress to and from the rear platform.
- Safe, ergonomic access system.
- All operators have adequate space when using the wide stairway.
- Operators maintain three-point contact when using full handrails on each side.
- Raise lower platform from cab level or ground.
- Occupants can quickly exit with a conveniently located emergency release valve if the loader becomes inoperable.
Legendary Cat Dealer Support
A valued partner, your Cat dealer is available whenever you need them.
- Preventive maintenance programs and guaranteed maintenance contracts.
- Best-in-class parts availability.
- Improve your efficiency with operator training.
- Genuine Cat Remanufactured parts.
The 854K is designed to maximize efficiency and productivity while conserving natural resources.
- Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
- Reduce waste to the environment with our maintenance free or extended maintenance batteries.
- Built for multiple lives, the Cat 854K is one of the most rebuilt products. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefiting the environment.
- Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.
Maximize your productivity with the right blade for your dozer application.
- High strength, pressed rib construction.
- Large Cat Track-Type Tractor bolt on cutting edges and bottom wear plates.
- Optimized widths and capacities for excellent dozing and rolling characteristics.
Increase your productivity with a Cat coal blade designed to retain load control and a large capacity for lighter materials.
Featuring the characteristics of the S and U blades into one package for increased capacity while retaining excellent spreading characteristics of a straight blade.
For unmatched durability in high wear applications the Semi-U blade feature:
- Hardox 400 Liner plate and side plates
- Additional reinforcements on the bottom of the blade