The excavator is 5 percent more fuel efficient than the 336D2 in similar applications.
The C7.1 engine meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Match the excavator to the job with two power modes. Smart mode automatically matches engine and hydraulic power to digging conditions, providing max power when needed and reducing power when it isn’t to help save fuel.
The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times.
Advansys™ bucket tips increase penetration and improve cycle times.
Add auxiliary hydraulics to do more work with various Cat attachments.
Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on demand through the VisionLink® online interface.
Expect up to 15 percent less maintenance cost than the 336F due to extended service intervals. (Savings calculated over 12,000 machine hours.)
Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
Change all fuel filters at a synchronized 1,000 hours. Oil and fuel filters are grouped and located on right-hand side of machine for easy maintenance.
The new air intake filter with pre-cleaner has double the dust holding capacity of the previous air intake filter.
The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous filter designs.
S·O·S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
Standard undercarriage, Reach boom,R3.2DB (10'6") stick, HD 1.88 m3 (2.46 yd3) bucket, 600 mm (24") triple grouser shoes, 6.8 mt (14,991 lb) counterweight. Add 900 kg (1,900 lb) more for long undercarriage.Standard undercarriage, Reach boom,R3.2DB (10'6") stick, HD 1.88 m3 (2.46 yd3) bucket, 600 mm (24") triple grouser shoes, 6.8 mt (14,991 lb) counterweight. Add 900 kg (1,900 lb) more for long undercarriage.