C13 (50 Hz) China Non Road
Specifications
Overview
350 to 450 kVA Generator Set for Emergency Standby (ESP), Standby, Prime and Continuous applications.
Generator Set Configurations
| Emissions/Fuel Strategy | Low Fuel Consumption, EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards Low Fuel Consumption, EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards | More |
Engine Specifications
| Engine Model | C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C13 ATAAC, I-6, 4-Stroke Water-Cooled Diesel | More |
| Compression Ratio | 16.3:1 16.3:1 | More |
| Aspiration | Air to Air Aftercooled Air to Air Aftercooled | More |
| Governor Type | Adem™A4 Adem™A4 | More |
| Fuel System | MEUI MEUI | More |
| Bore | 5.12 in 130.0 mm | More |
| Displacement | 762.8 in³ 12.5 l | More |
| Stroke | 6.18 in 157.0 mm | More |
Equipment
C13 (50 Hz) China Non Road Standard Equipment
Air Inlet System
- Air cleaner; light duty with disposable paper filter
- Aftercooler core
- Turbocharger
Control Panel
- EMCP 4.2
Cooling System
- Radiator and cooling fan with guard
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Caterpillar Extended Life Coolant
Exhaust System
- Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
Fuel System
- Primary fuel filter w/integral water separator & secondary filter
- Fuel coolersteel with single wall integral 8-hour fuel tank
- Fuel priming pump
- Flexible fuel lines
- Engine fuel transfer pump
Generator and Attachments
- A frame generator - IP21 Protection
- Optional LC frame generator - IP23 Protection
- Integrated Voltage Regulator
- Power center, IP22
- Segregated low voltage (AC/DC) wiring panel
- Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
Governing System
- Cat Electronic Governor (ADEM A4)
Lube System
- Lubricating oil
- Oil drain valves
Mounting System
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines.
Starting / Charging System
- 24V battery with rack and cables
General
- Engine and alternator pre-paint, Caterpillar yellow
C13 (50 Hz) China Non Road Optional Equipment
European Certificates
- EU certificate of conformance
- Global certificate for CIS
Air Inlet System
- Single element air cleaner
- Dual element air cleaner
Circuit Breakers
- 3 Pole (IEC-100% rated) circuit breaker
- 4 Pole (IEC-100% rated) circuit breaker
- 3 Pole (IEC-100% rated) circuit breaker - Motorised
- 4 Pole (IEC-100% rated) circuit breaker - Motorised
- Circuit breaker (IEC) auxiliary contacts
- Shunt trip for IEC circuit breaker
- Pad-lockable circuit breaker device
Control Panels
- EMCP 4.3, EMCP 4.4
- Volt free contacts
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
- Local alarm modules: Local annunciator
- Remote annunciator modules
Cooling System
- Radiator duct flange
- Stone guards
- Low coolant temperature alarm
Enclosures
- Sound attenuated enclosures
- High ambient sound attenuated enclosures
Exhaust System
- Mufflers - End in / End out
- 10, 25 and 35 dBA attenuation
- 6 and 8 inch flange GP
- Flexible 8 inch exhaust fittings
- 6 and 8 inch elbow kit
Fuel System
- Integral dual wall fuel tank base
- Manual fuel transfer pump
- Fuel transfer system controls
Generator and Attachments
- Ingress protection
- Permanent magnet generator
- Space heaters
- A frame oversize generator
- A frame CIP generator
- LC frame generator
- LC frame oversize generator
- LC CIP generator
Lube System
- Manual sump pump
Mounting System
- Narrow skid base
Starting / Charging System
- 5 Amp single battery charger
- Battery disconnect switch
- Jacket water heater
Related Products
Attachments
Benefits & Features
Cat Diesel Engine
Generator
Cat EMCP Control Panel
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP 4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP 4 systems can be further customized to meet your needs through programming and expansion modules.
Design Criteria
The generator set accepts 100% rated load in one step per NFPA 110 and meets ISO 8528-5 transient response.
Single-Source Supplier
Fully prototype tested with certified torsional vibration analysis available
World Wide Product Support
Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products
