C18 (50 Hz) China Non Road
Equipment
C18 (50 Hz) China Non Road Standard Equipment
Air System
- Air Cleaner, light duty
- Turborcharger
Control Panel
Cooling System
- Radiator and cooling fan with guard
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Caterpillar Extended Life Coolant
Exhaust System
- Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use; shipped loose
Fuel System
- Standard open set fuel tank / base supplied Base, formed steel with single wall integral 8-hour fuel tank
Generator and Attachments
- A frame generator - IP21 Protection
- Optional LC frame generator - IP23 Protection,
- Integrated Voltage Regulator
- Power center, IP22
- Segregated low voltage (AC / DC) wiring panel
- Mandatory Option Rear circuit breaker, IEC, 3 pole, mounted in power center
Governing System
- Cat Electronic Governor (ADEM A4)
Lube System
- Lubricating oil
- Oil drain valves
Mounting System
- Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting / Charging
General
- Engine and alternator pre-paint, Caterpillar Yellow
C18 (50 Hz) China Non Road Optional Equipment
Certifications
- European Certifications - EU certificate of conformance
- Global
Air Inlet System
- Single element air cleaner
- Dual element air cleaner
Circuit Breakers
- 3 Pole (IEC-100% rated) - package mounted
- 4 Pole (IEC-100% rated) - package mounted
- 3 Pole (IEC-100% rated) - motorized
- 4 Pole (IEC-100% rated) - motorized
- Pad-lockable device
- Power terminal strips
Control Panel
Control System
Cooling System
- Remote annunciator modules
Enclosures
- Radiator duct flange
Exhaust System
- Sound attenuated enclosures
- Engine mounted muffler
- Mufflers, End in / End out
- Flange groups; 8 and 10 inch weld flanges and gaskets
- Elbow Kit
Fuel System
- Manifold and turbocharger guard
- Integral -Duel wall fuel tank bases
- Manual fuel transfer system
Generator and Attachments
- Fuel transfer system
- Ingress protection
- Permanent magnet excitation
- Space heaters
- A frame oversize generator
- A frame CIP generator
- LC frame generator
- LC frame oversize generator
Lube System
- LC frame CIP generator
Mounting System
- Manual sump pump
Starting / Charging System
- Narrow skid base
- 5 Amp battery charger
- Battery disconnect switch
- Jacket water heater
Related Products
Specifications
Overview
Producing reliable power from 550 kVA to 715 kVA at 50 Hz, our C18 diesel generator sets are made to meet your standby and prime applications. Each is designed to ISO 8528-5 transient response requirements and built accept 100 percent rated load in one step. Our C18 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certified. Seismic certification is also available for select models, so you can deliver power despite disturbances. Our integrated control system, including ATS and switchgear ensure a consistent power supply and connection to your fleet through on-site and remote monitoring options. We offer a wide range of EMCP 4 control panel options, with a simple screen display, consolidating all your management and diagnostics tools. The EMCP 4.4 controller provides on package paralleling capability, allowing you to use multiple generator sets to power your facility, providing added capacity and redundancy. We've made our generator sets adaptable to your demands with a broad range of accessories and bolt-on system expansion attachments. Find flexible packaging to fit your spatial restrictions and environmental conditions. Even choose UL 2200 and CSA certified package options for added safety.
Generator Set Configurations
| Emissions/Fuel Strategy | Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards), EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards | More |
Engine Specifications
| Engine Model | C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel | More |
| Bore | 145 mm (5.71 in) 145 mm (5.71 in) | More |
| Displacement | 18.13 L (1106.36 in3) 18.13 L (1106.36 in3) | More |
| Stroke | 183 mm (7.2 in) 183 mm (7.2 in) | More |
| Compression Ratio | 14.5:1 14.5:1 | More |
| Aspiration | Air to Air Aftercooled Air to Air Aftercooled | More |
| Governor Type | Adem™A4 Adem™A4 | More |
| Fuel System | Electronic unit injection Electronic unit injection | More |
Benefits & Features
Generator
Cat EMCP Control Panel
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.
Seismic Certification
Design Criteria
The generator set accepts 100% rated load in one step per NFPA 110 and meets ISO 8528-5 transient response.
UL 2200 / CSA - Optional
Single-Source Supplier
Fully prototype tested with certified torsional vibration analysis available
World Wide Product Support
Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products