Electric Power Generation

Cat EGP Switchgear

< Back

The EXL is a wall mounted system that monitors and controls a single engine generator for operation in parallel with a single utility source. This cost effective alternative to switchgear mounted controls is designed for voltages from 208V through 32kV. The EXL will support Emergency Standby as well as Utility Paralleling applications.
Request A Quote
Financing & Insurance
See our Offers
  • Find Your Dealer
View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

Caterpillar offers standard Switchgear products, which can support a wide variety of applications, or provide a custom designed system to meet your specific project needs. The Emergency Generator paralleling (EGP) product supports paralleling on an isolated generator bus and is commonly used in prime power or emergency standby systems. Caterpillar Standard Switchgear products provide a solution able to combine all elements of monitoring and control for Caterpillar generator sets in a single-source package. Caterpillar also designs and manufacturers custom switchgear to meet specific customer requirements and functionality.

Technical Summary

Units:
Configuration Traditional customizable PLC based floor standing switchgear capable of controlling and monitoring multiple utilities, generators, and loads Traditional customizable PLC based floor standing switchgear capable of controlling and monitoring multiple utilities, generators, and loads Less
Modes of Operation Multi-unit Island and multi-unit standby mode with optional redundant controls and components. Multi-unit Island and multi-unit standby mode with optional redundant controls and components. Less
Application LV and MV (208V - 38 kV) LV and MV (208V - 38 kV) Less

Generator Protective Devices

ANSI Protective Devices 15/25, 27/59, 81 O/U, 32, 40, 50, 51 15/25, 27/59, 81 O/U, 32, 40, 50, 51 Less

Environmental Parameters

Certifications IBC, CBC, UBC & OSHPD Certified IBC, CBC, UBC & OSHPD Certified Less
Control Panel Enclosure NEMA 1 or NEMA 3R Freestanding Construction NEMA 1 or NEMA 3R Freestanding Construction Less
Operating Temperature 0°C to 50°C 0°C to 50°C Less
Storage Temperature -20°C to +60°C -20°C to +60°C Less
Low Voltage Standards NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 Less
Medium Voltage Standards NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 Less

EGP Switchgear

  • High Speed Supervisory Network
  • Automatic Start/Stop
  • Automatic “Dead Bus” Coordination
  • Programmable Load Shed / Load Add Functions
  • Networked Engine Communications
  • Generator Protection
  • Engine Tuning
  • Mode Selection
  • Selectable Auto/ Manual Control
  • Password Protection for Protective Settings and Setup
  • Load/No Load Test
  • Touch Screen (HMI) Display
  • NFPA 99/110 Compliant Alarm
  • Annunciation with Audible Horn
  • Engine Control mimic Screen with gauges for RPM, DC Battery Voltage oil Pressure, Engine Coolant temperature, Engine Hours, Number of starts

Cat EGP Switchgear Standard Equipment

EGP Switchgear
  • Choice of 19” Surface Acoustic Wave Color or 15” Resistive Color Touchscreen
  • Circuit Breaker Control Switch with Indicators
  • Audible Alarm & Horn Silence Button
  • Emergency Stop Button for each generator
  • Instant Auto Switch
  • Generator Demand Priority Control

Cat EGP Switchgear Optional Equipment

Data Table Interface
  • * Accomodates interface with a building management system for monitoring all system parameters via Modbus RTU or TCP

Supplemental Hardware Synchronization check relay (ANSI 25 Device)
  • * Provides additional discrete synchronization protection

Remote Power Monitoring System
  • * To monitor breaker status, alarms, metering and other operating parameters

EMCP 4 Generator Set Controls

Cat generator sets provide a complete factory-built solution with fully featured standard and advanced controls. Optional accessories enhance the capabilities of the genset package-mounted control system.

Learn More

Why Choose Cat® Electric Power?

Caterpillar offers a comprehensive variety of electric power systems, customized to fit your needs. Our specialized systems deliver high power and performance in industries across the globe. With Caterpillar, you get outstanding manufacturing quality, expert support, and the essential tools and applications to complete any project.

Learn More About Electric Power

Application Center

Explore valuable resources for generator sizing, specification, and training materials. SpecSizer evaluates load types, collects data, and organizes it to help you select the generator set that's best for you. Find product comparisons, technical data, product sizing, and more using our technical information portal (TIP) specifically created for consultants, architects, engineers, and owners.

visit page