D6 XE

< Back

View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

Overview

The Cat D6 XE is the world’s first high drive Electric Drive dozer. Next-generation technology allows constant power to the ground, greater agility and faster cycle times with up to 35 percent better fuel efficiency and reduced maintenance costs.

Engine

Units:
Engine Model Cat C9.3B Cat C9.3B Less
Power - Net 215.0 HP 161.0 kW Less
Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final Less
Net Power - Rated - ISO 9249/SAE J1349 (DIN) 219.0 HP 219.0 HP Less
Build Number 20A 20A Less
Note (1) Rated horsepower at 1,700 rpm Rated horsepower at 1,700 rpm Less
Note (2) All non-road Tier 4 Interim and Final, Stage IIIB, IV and V and Korea Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20 blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. All non-road Tier 4 Interim and Final, Stage IIIB, IV and V and Korea Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20 blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. Less
Note (3) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Less
Note (4) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full D6/D6 XE Technical Specifications. Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full D6/D6 XE Technical Specifications. Less

Weights

Operating Weight 51250.0 lb 23248.0 kg Less

Transmission

Power Train Electric Drive Electric Drive Less

Engine - Standard

Net Power - Rated - ISO 9249/SAE J1349 215.0 HP 161.0 kW Less

Service Refill Capacities

Fuel Tank 90.0 gal (US) 341.0 l Less
DEF Tank 7.4 gal (US) 28.0 l Less

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. Less

D6 XE Push Arm

Operating Weight 49100.0 lb 22273.0 kg Less
Ground Pressure 8.0 psi 54.7 kPa Less
Width of Standard Shoe 24.0 in 610.0 mm Less
Blade Semi-Universal (SU) Semi-Universal (SU) Less
Blade Capacity 7.5 yd³ 5.7 m³ Less

D6 XE LGP (30-in) Push Arm

Operating Weight 50730.0 lb 23013.0 kg Less
Ground Pressure 6.7 psi 46.7 kPa Less
Width of Standard Shoe 30.0 in 760.0 mm Less
Blade Semi-Universal (SU) Semi-Universal (SU) Less
Blade Capacity 7.6 yd³ 5.8 m³ Less

D6 XE LGP (36-in) Push Arm

Operating Weight 53215.0 lb 24139.0 kg Less
Ground Pressure 5.2 psi 35.7 kPa Less
Width of Standard Shoe 36.0 in 915.0 mm Less
Blade Straight Straight Less
Blade Capacity 5.0 yd³ 3.8 m³ Less

D6 XE VPAT

Operating Weight 49630.0 lb 22513.0 kg Less
Ground Pressure 7.2 psi 49.7 kPa Less
Width of Standard Shoe 24.0 in 610.0 mm Less
Blade VPAT VPAT Less
Blade Capacity 5.4 yd³ 4.1 m³ Less

D6 XE LGP (30-in) VPAT

Operating Weight 51250.0 lb 23248.0 kg Less
Ground Pressure 5.9 psi 40.7 kPa Less
Width of Standard Shoe 30.0 in 760.0 mm Less
Blade VPAT VPAT Less
Blade Capacity 5.9 yd³ 4.5 m³ Less

D6 XE LGP (36-in) VPAT

Operating Weight 52475.0 lb 23803.0 kg Less
Ground Pressure 5.1 psi 35.7 kPa Less
Width of Standard Shoe 36.0 in 915.0 mm Less
Blade VPAT VPAT Less
Blade Capacity 6.5 yd³ 4.9 m³ Less

EFFICIENCY AND PRODUCTIVITY

MOVE MORE WITH LESS FUEL

LONG TERM VALUE AND DURABILITY

TECHNOLOGY THAT GETS WORK DONE

DESIGNED FOR OPERATORS

LOWER MAINTENANCE COSTS

BUILT-IN SAFETY FEATURES

WASTE HANDLING PERFORMANCE

FORESTRY/LAND CLEARING POWER

D6 XE Standard Equipment

Attachments
  • Ripper-ready rear hydraulics
  • Ripper and winch-ready rear hydraulics

D6 XE Optional Equipment

Service and Maintenance
  • High-speed oil change