Cat | 910M Compact Wheel Loader

Product Specifications for 910M

US
Metric

Engine

Maximum Gross Power	100.0 HP 74.0 kW
Net Power	97.0 HP 72.0 kW
Rated Net Power - SAE J1349	96.0 HP 72.0 kW
Rated Net Power - Rated Engine Speed	2200.0 r/min 2200.0 r/min
Maximum Gross Power - ISO 14396 (DIN)	101.0 HP 74.0 kW
Maximum Gross Power - ISO 14396	100.0 HP 74.0 kW
Maximum Gross Power - Maximum Engine Speed	2350.0 r/min 2350.0 r/min
Engine Model	Cat C4.4 ACERTï¿½ Cat C4.4 ACERTï¿½
Maximum Gross Power - SAE J1995	102.0 HP 76.0 kW
Emissions	Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Stroke	5.0 in 127.0 mm
Bore	4.13 in 105.0 mm
Maximum Gross Torque - ISO 14396	332.0 ft·lbf 450.0 N·m
Rated Net Power - ISO 9249 (DIN)	98.0 HP 72.0 kW
Maximum Gross Torque - SAE J1995	336.0 ft·lbf 455.0 N·m
Rated Net Power - ISO 9249	97.0 HP 72.0 kW
Note	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Displacement	268.0 in³ 4.4 l

Weights

Operating Weight

17893.0 lb 8116.0 kg

Service Refill Capacities

Cooling System	5.7 gal (US) 21.5 l
Fuel Tank	40.7 gal (US) 154.0 l
Hydraulic System - Including Tank	25.9 gal (US) 98.0 l
Engine Crankcase	2.3 gal (US) 8.8 l
Diesel Exhaust Fluid (DEF) Tank	5.0 gal (US) 18.9 l
Note	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential	2.0 gal (US) 7.5 l
Hydraulic Tank	14.5 gal (US) 55.0 l
Axles - Front Center Differential	2.0 gal (US) 7.5 l
Transmission	0.9 gal (US) 3.4 l

Operating Specifications

Rated Bucket Capacity

2.5 yd³ 1.9 m³

Buckets

Bucket Capacities

1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3) 1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)

Cab

ROPS	ISO 3471:2008 ISO 3471:2008
FOPS	ISO 3449:2005 Level II ISO 3449:2005 Level II
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)	The measurements were conducted with the cab doors and windows closed. The measurements were conducted with the cab doors and windows closed.
Note (3)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008, when properly installed and maintained, is 77 dB(A). The declared dynamic operator sound pressure levels per ISO 6396:2008, when properly installed and maintained, is 77 dB(A).

Loader Hydraulic System

Hydraulic Cycle Time - Dump, at Maximum Reach	1.4 s 1.4 s
Relief Pressure - Tilt Cylinder	4931.0 psi 34000.0 kPa
Maximum Flow - Implement Pump	32.0 gal/min 122.0 l/min
Maximum Working Pressure - Implement Pump	3408.0 psi 23500.0 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	3046.0 psi 21000.0 kPa
Hydraulic Cycle Time - Rackback	2.2 s 2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	5.2 s 5.2 s
Hydraulic Cycle Time - Total Cycle Time	12.5 s 12.5 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	3.7 s 3.7 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	24.0 gal/min 90.0 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	24.0 gal/min 90.0 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	3046.0 psi 21000.0 kPa

Transmission

Note	Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Low Range, Speed Range 1*	6.3 mile/h 10.0 km/h
Forward and Reverse - Low Range, Speed Range 2*	12.5 mile/h 20.0 km/h
Forward and Reverse - High Range	25.0 mile/h 40.0 km/h

Steering

Steering Articulation Angle - Each Direction	40.0 ° 40.0 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	3.2 s 3.2 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.75 turns 3.75 turns
Maximum Working Pressure - Steering Pump	2683.0 psi 18500.0 kPa
Maximum Flow - Steering Pump	17.0 gal/min 66.0 l/min

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - ISO 9249	329.0 ft·lbf 446.0 N·m
Maximum Net Torque - SAE J1349	325.0 ft·lbf 441.0 N·m

Axles

Front	Fixed; Locking differential (standard) Fixed; Locking differential (standard)
Rear	Oscillating ï¿½11 degrees; Locking differential (Standard) Oscillating ï¿½11 degrees; Locking differential (Standard)

Tires

Note (3)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include	15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexportï¿½ 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexportï¿½
Note (2)	In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (1)	Other tire choices are available. Contact your Cat dealer for details. Other tire choices are available. Contact your Cat dealer for details.
Standard Size	15.5-25 12PR 15.5-25 12PR

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.

First Name

Last Name

Business Phone

Company

Company Address

City

Zip/Postal Code

Country

Level of interest

Yes I'd like to receive future marketing (e.g. new product information, promotions) communications (e.g. email, text and phone) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us. No I would not like to receive future marketing communications.