C32 (50 Hz) with Upgradeable Packaging

< Back

View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.

C32 (50 Hz) with Upgradeable Packaging Standard Equipment

Air Inlet System
  • Single element canister type with service indicator

Control Panel
  • Control Features
  • EMCP 4.2
  • Communications
  • Programmable Protective Relaying Functions
  • Digital Indicators
  • Warning Shutdowns

Cooling System
  • Coolant drain line with valve
  • Caterpillar Extended Life Coolant
  • Low coolant level sensor
  • Radiator fan and fan drive
  • Fan and belt guards
  • ATAAC

Exhaust System
  • 203 mm (8 in) ID round flanged outlet
  • Exhaust manifold - Dry

Fuel System
  • Fuel priming pump
  • Fuel cooler
  • Secondary fuel filters
  • Primary fuel filter with water separator

General
  • Caterpillar Yellow with high gloss black rails & radiator
  • RH Service
  • SAE Standard Rotation
  • Flywheel and flywheel housing-SAE

Generators and Attachments
  • 3 Phase brushless
  • Reactive droop
  • Busbar connections, top center mounted, top cable entry
  • Internal excitation
  • Permanent magnet
  • Integrated voltage regulator (IVR)
  • Class H temperature rise at 40C ambient
  • Salient pole
  • Winding temperature detectors
  • 6 Lead
  • NEMA Class H insulation
  • IEC standard hole pattern

Governing System
  • ADEM(tm) A4

Lube System
  • Fumes disposal
  • Oil drain lines and valve
  • Lubricating oil
  • Gear type lube oil pump
  • Integral lube oil cooler
  • Oil filter, filler and dipstick

Mounting System
  • Rubber anti-vibration mounts
  • Rails - engine/generator/radiator mounting

Power Termination
  • Busbar

Starting / Charging System
  • 45 amp charging alternator
  • Battery, rack and cables
  • Battery disconnect switch
  • 24-volt electric starting motor

C32 (50 Hz) with Upgradeable Packaging Optional Equipment

Control System
  • Expansion I/O module
  • EMCP 4.3, EMCP 4.4
  • Remote monitoring software
  • Local annunciator module
  • Remote annunciator module

Engine System
  • Heavy duty electric starting motors
  • Muffler (industrial grade)
  • Jacket water heater
  • Dual element air cleaners
  • Rubber anti-vibration mounts (90% efficient)
  • Battery charger (10 amps)
  • Heavy duty batteries
  • Exhaust guards / shields
  • Heavy duty air cleaners
  • Spring type anti-vibration mounts (95% efficient)
  • Radiator duct flange

Extended Service Contract
  • 2 Year Extended Service Contract (ESC)
  • 3 Year Extended Service Contract (ESC)
  • 5 Year Extended Service Contract (ESC)

Generators
  • Generator stator and bearing temperature monitoring & protection
  • Anti-condensation heaters
  • Temperature Rise over 40°C ambient: [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C
  • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
  • Winding: [ ] Random [ ] Random with coastal insulation [ ] Form

Power Termination
  • Circuit breaker, 100% Rated, UL Listed (fully rated)
  • Bus bars
  • Circuit breaker, IEC listed (fully rated)

Design Criteria

The generator set meets transient response and block loading steps as per ISO 8528-5.

Cat Generator Set Package

Cat generator set packages have been fully prototype tested, and certified torsional vibration analysis reports are available. The packages are designed to accept 100% load in one step, meet the NFPA 110 requirement for loading, and conform to the ISO 8528-5 steady state and transient response requirements.

World Wide Product Support

Cat Dealers have over 1,800 dealer branch stores operating in 200 countries, providing extensive pre-sale and post-sale support, from 98% parts availability within 24 hours to an individualized customer support agreement (CSA), the Cat dealer will provide support.

EMCP Control Panels

The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. The EMCP 4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP 4 systems can be further customized to meet your needs through programming and expansion modules.

Generators

The generators used on Cat packages have been designed and tested to work with the Cat engine. The generators are built with robust Class H insulation and provide industry leading motor starting capability. Random wound generators provide good generator performance in a majority of applications and form wound is available for harsh mechanical and electrical environments.

Cooling System

The cooling system has been designed to operate in standard ambient temperatures up to 50°C (122°F), with optional high ambient radiators available. The factory installed cooling system has been designed and tested to ensure proper generator set cooling, and includes the radiator, fan, belts, and all guarding installed as standard. Contact your Cat Dealer for specific ambient and altitude capabilities.

Cat Diesel Engines

The four cycle Cat diesel engine combines consistent performance with excellent fuel economy and transient response that meets or exceeds ISO 8528-5. The engines have been designed and built for a wide range of applications and can be optimized for lowest fuel consumption, low emissions, or U.S. Environmental Protection Agency (EPA) certified configurations. The engines feature a reliable, rugged, and durable design that has been field proven in thousands of applications worldwide from emergency standby installations to continuously operating power plants.

Precision Sizing at Your Fingertips.

Caterpillar Electric Power is excited to introduce you to our latest generator set sizing software, Cat® Electric Power SpecSizer. Considering factors such as site conditions, load characteristics and required performance, SpecSizer provides accurate and timely technical data, robust load models and optimized algorithms to assist in specifying a properly sized generator set to best meet your power needs.

Learn More

Power Systems Technical Information Portal

Find product comparisons, technical data, product sizing and more using our technical information portal specifically created for consultants, architects, engineers, and owners.

Learn More