C2.2

< Back

Financing & Insurance
See our Current Offers

C2.2Standard Equipment

Air Inlet System
  • Inlet manifold

Control System
  • Alternator 12 volt 65 amp
  • Tier 4 Final: Alternator 12V 85 amp
  • Starter motor 12 volt
  • Glow plug starting aid

Cooling System
  • Belt-driven coolant pump
  • Coolant temperature switch
  • Mounted air cleaner
  • Mounted radiator and fan

Flywheels and Flywheel Housing
  • SAE No. 7 1/2 flywheel
  • SAE No. 4 flywheel housing

Fuel System
  • Fuel injection pump
  • Spin-on fuel filter
  • Electronic Shut-off Solenoid (ESOS)

Lube System
  • Spin-on lube oil filter
  • Lube oil pressure switch
  • Lube oil sump

Power Take Off (PTO)
  • Provision for Power Take Off (PTO)
  • SAE A PTO drive (Tier 4 Final, Stage IV)

General
  • Cast iron, engine block
  • Cast iron exhaust manifold--side outlet
  • Cold start capability to -20° C (-4° F)
  • Gradeability 35° continuous
  • Paint: Caterpillar yellow, with optional colors available at request

Overview

The Cat® C2.2 Industrial Power Unit is offered in ratings ranging from 37.3 - 49.2 bkW (50.0 - 65.9 bhp) @ 2800-3000 rpm. These ratings meet U.S. EPA Tier 4 Interim equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

Power Rating

Units:
Minimum Rating 50.0 BHP 37.3 bkW Less
Maximum Rating 65.9 BHP 49.2 bkW Less
Rated Speed 2800-3000 rpm. 2800-3000 rpm. Less

Emission Standards

Emissions U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIA Equivalent Less

General

Engine Configuration Inline 4, 4-Stroke-Cycle Diesel Inline 4, 4-Stroke-Cycle Diesel Less
Bore 84 mm (3.3 in) 84 mm (3.3 in) Less
Stroke 100 mm (3.9 in) 100 mm (3.9 in) Less
Displacement 2.216 L (135 in³) 2.216 L (135 in³) Less
Aspiration Naturally Aspirated (NA), Turbocharged (T), or Turbo Aftercooled (TA) Naturally Aspirated (NA), Turbocharged (T), or Turbo Aftercooled (TA) Less
Compression Ratio 23.3:1 23.3:1 Less
Rotation from Flywheel End Counterclockwise Counterclockwise Less
Cooling System - Capacity 6.98 L (7.4 qt) 6.98 L (7.4 qt) Less
Lube System - Refill 10.6 L (11.2 qt) 10.6 L (11.2 qt) Less

Power Unit Dimensions - Approximate

Height 854-973 mm (33.62-38.3 in) 854-973 mm (33.62-38.3 in) Less
Length 946-973 mm (37.24-38.3 in) 946-973 mm (37.24-38.3 in) Less
Weight - Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C 218-228 kg (480-502 lb) 218-228 kg (480-502 lb) Less
Width 513-590 mm (20.3-23.23 in) 513-590 mm (20.3-23.23 in) Less

Emissions

Meets. U.S. EPA Tier 4 Interim equivalent, EU Stage IIIA equivalent emission standards.

High Performance

This radiator-cooled package delivers impressive performance up to a 3000 rpm rating.

Package

Ultra-compact package size ensures ease of installation as well as exceptional density. Radiators have been designed and air filters positioned for easy installation.

Low Cost Maintenance

Single-side servicing improves ease of maintenance and simplifies the servicing routine. Standard 500 hour service intervals.

Quality

Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.