C7.1 Generator Set

C7.1

Product Specifications for C7.1

Generator Set Specifications

Engine Specifications

Generator Set Dimensions

Generator Specifications

C7.1 Standard Equipment

AIR INLET SYSTEM

  • Open Crankcase Ventilation (OCV) system
  • Turbocharger, jacket water cooled
  • Integrated coolant lines into manifold utilizing EGR circuit

CONTROL SYSTEM

  • Panels available in RH, LH, and rear configurations with a remote mount option
  • Electronic diagnostics and fault logging
  • Electronic governor
  • Electronic Control Module (ECM)
  • SAE J1939 data link Ratings Only
  • Electronic fuel/air ratio control

COOLING SYSTEM

  • Integrated heat exchanger and aftercooler
  • Compact design integral coolant passages
  • Thermostat and housing
  • Jacket Water Heater 120/240V option
  • Auxiliary seawater pump, gear driven
  • Engine mounted heat exchanger, removable tubeBundle (for sea water) (heat exchanger engines only)
  • Engine oil cooler
  • Auxiliary sea water lines
  • Keel cooling

EXHAUST SYSTEM

  • Water-cooled exhaust manifold & turbocharger
  • 152 mm (6 in) round flanged outlet
  • Dry Elbow/Flange options

FLYWHEELS & FLYWHEEL HOUSINGS

  • Flywheel Housing, SAE No. 2
  • Flywheel, 134 teeth
  • SAE standard rotation

FUEL SYSTEM

  • Common Rail Fuel System
  • Simplex and Duplex Fuel options
  • Flexible fuel line option
  • Fuel transfer pump, gear driven

GENERATORS AND GENERATOR ATTACHMENTS

  • 12 leads
  • 3 phase Brushless
  • Separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds
  • 2/3 Pitch
  • Broad voltage band
  • IP23 Water protection
  • Solid state voltage regulator with integral voltage adjustment
  • Class H insulation
  • Generator temperature rise exceeds marine society requirements for 105 C @ 50 C ambient - prime 85 C @ 50 C ambient - prime Connection poles

LUBE SYSTEM

  • Crankcase breather
  • Simplex and Duplex options
  • Oil filter, RH service
  • Oil filler, in valve cover and timing case (option)
  • Oil level gauge, RH service
  • Oil pan
  • Oil pan drain, RH`
  • Lubricating oil
  • Engine oil pump (gear driven)

MOUNTING SYSTEM

  • Skiddable base frame
  • Anti vibration isolators between base and engine-generator

POWER TAKE-OFFS

  • Poly-V groove for alternator drive
  • PTO Shaft Kit (optional)

GENERAL

  • Torsional vibration damper and guard
  • Paint, Caterpillar yellow
  • Lifting eyes
  • Protective lifting covers
  • Literature
  • Battery disconnect switch
  • Plastic wrap packaging
  • Note: Keel-cooled gen sets do not include the keel cooler(s).
  • Engine is certified to D2/E2 emissions cycles

C7.1 Optional Equipment

CONTROL SYSTEM

  • Governor droop kit

EXHAUST SYSTEM

  • Dry Elbow
  • Dry Flange
  • Exhaust Temp Sensor

FUEL SYSTEM

  • Flexible Fuel Lines

LUBE SYSTEM

  • Dipstick

COOLING SYSTEM

  • Coolant recovery tank
  • Jacket Water Heater

POWER TAKE-OFFS

  • Crankshaft Pulley

See how C7.1 compares against frequently compared products.

Tools And Expert Help At Every Turn

Cat Connect: Get More from Every Asset

INFORM: Remotely access equipment information so you can make more informed decisions ADVISE: Receive clear predictive recommendation about your equipment from your Cat Dealer to reduce costs and increase revenue PARTNER: Let your Cat Dealer manage your equipment so you can focus on your business

Learn More

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.


Check out current offers for the C7.1

View More Offers