CN5086 Electric Motor

< Back

View Product Downloads
Yes, I would like to receive future marketing communications (such as email) from Caterpillar Inc., its affiliates and subsidiaries worldwide and the Caterpillar dealer network. Regardless of whether you decide to receive these marketing communications, Caterpillar will continue to send service/transactional messages, including those that have to do with any accounts that you may have with us.


Get power built for your most demanding gas compression applications. Every Cat® electric motor is tested at each stage of production to make sure it performs reliably under load and according to your process requirements. High operating efficiency and low operating costs come with low noise levels and no emissions. Cat electric motors for gas compression are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.

Electric Motor Specifications

Electric Motor Type Squirrel Cage Induction Motor Squirrel Cage Induction Motor Less
Mounting Designation F1 or F2 F1 or F2 Less
Number of Poles 8 8 Less
Voltage/Frequency 4000V ± 10%/60 Hz 4000V ± 10%/60 Hz Less
Full Load Speed 894.0 r/min 894.0 r/min Less
Type of EX-Protection Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC) Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC) Less
Connection of Stator Winding Star Star Less
Rated Torque 29366.0 lb/ft 39815.0 N·m Less
Standards NEMA MG1 NEMA MG1 Less
Maximum Altitude - Before Derate 3000.0 ft 1000.0 m Less
Service Factor 1.15 SF 1.0 vfd Less
No Load Current 200 Amps 200 Amps Less
Maximum Ambient Temperature 104.0 °F 40.0 °C Less
Temperature Rise Class B at rated load Class B at rated load Less
Shaft 8.5 in 216.0 mm Less
Insulation Class F Class F Less
Enclosure Type/Method of Cooling WP-II WP-II Less
Duty Continuous Continuous Less
Locked Rotor Amps 520% Code E 520% Code E Less
Full Load Current 658 Amps 658 Amps Less
Locked Rotor Torque 60% 60% Less
Breakdown Torque 190% 190% Less

CN5086 Electric Motor Standard Equipment

  • Self-lubricated sleeve bearings
  • Insulated non-drive end bearings to reduce bearing currents
  • Bearing RTDs for temperature monitoring

  • Designed for minimal vibration
  • Dynamic balancing at full operational speed
  • Fabricated copper squirrel cages
  • Oversized, forged, keyless shaft
  • AISI 4140/DIN42CrMo4 shaft

  • Radial air ducts ensure uniform and efficient cooling
  • Vacuum pressure impregnated with specially formulated epoxy resin
  • 2X RTDS per Phase
  • Space heater
  • Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

Cat Connect: Get More from Every Asset

  • INFORM : Remotely access equipment information so you can make more informed decisions
  • ADVISE : Receive clear predictive recommendation about your equipment from your Cat Dealer to reduce costs and increase revenue
  • PARTNER : Let your Cat® Dealer manage your equipment so you can focus on your business

Learn More