C18 ACERT Fire Pump Engine

C18 ACERT™

Minimum Rating
600.0 BHP
447.0 bkW
Maximum Rating
800.0 BHP
597.0 bkW
Emissions
U.S. EPA Tier, Tier 2 or non-certified
U.S. EPA Tier, Tier 2 or non-certified

Product Specifications for C18 ACERT™

Engine Specifications

Capacity for Liquids

Dimensions

C18 ACERT™ Standard Equipment

Air Inlet System

  • Dual turbocharger: front and rear inlet 127.mm (5.0 in)
  • Separate Circuit Aftercooled (SCAC)

Charging System

  • Charging alternator 24 volt, 50 amp

Control System

  • Dual Electronic Control Units (ECU), primary and secondary
  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold start capability to -20° C (-4° F)
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and total engine limit
  • Electronic diagnostics and fault logging
  • Engine monitoring system SAE J1939 broadcast and control

Cooling System

  • Thermostats and housing, vertical outlet
  • Jacket water pump, centrifugal
  • Heat exchanger installed
  • Expansion tank

Exhaust System

  • Exhaust manifold, dry
  • Dual turbo: exhaust elbow, dry 203 mm (8 in)

Flywheels and Flywheel Housing

  • SAE No. 1 flywheel
  • SAE No. 1 flywheel housing
  • Power take-off (PTO) flywheel stub shaft

Fuel System

  • Electronic unit injector
  • Fuel filter, secondary (2 micron high performance)
  • Fuel transfer pump
  • Fuel priming pump
  • Fuel sample valve, mounted on fuel filter base
  • Primary fuel filter
  • Water separator

Instrumentation

  • Instrument panel, LH
  • Engine oil pressure gauge
  • Voltmeter gauge
  • Water temperature gauge
  • Tachometer/engine hour meter

Lube System

  • Open crankcase ventilation system
  • Oil cooler
  • Lube oil filter
  • Front sump oil pan
  • Oil filler
  • Oil dipstick
  • Oil pump

Mounting System

  • Front and rear support

Protection System

  • Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)

Starting System

  • 24 volt, LH electric starting motor
  • Jacket water heater (3 kW, 120-240 volt)

General

  • Vibration damper
  • Lifting eyes
  • Automatic variable timing, electronic
  • Electronic installation kit, 70 pin connector (connectors, pins, sockets)

See how C18 ACERT™ compares against frequently compared products.

Tools And Expert Help At Every Turn

Cat Connect: Get More from Every Asset

<ul> <li><b>INFORM</b> : Remotely access equipment information so you can make more informed decisions</li> <li><b>ADVISE</b> : Receive clear predictive recommendation about your equipment from your Cat Dealer to reduce costs and increase revenue</li> <li><b>PARTNER</b> : Let your Cat<sup>®</sup> Dealer manage your equipment so you can focus on your business</li> </ul>

Learn More

Product Brochures and More Are Ready to Download!

Caterpillar product brochures and other informational documents are available for your growing business. To get exclusive access to more awesome content, sign up below. Or for instant access, you can skip this form.


Check out current offers for the C18 ACERT™

View More Offers