3512C (HD) Land Drilling Generator Sets

3512C (HD)

Minimum Rating
1245.0 ekW
1245.0 ekW
Maximum Rating
1245.0 ekW
1245.0 ekW
Emissions
U.S. EPA Nonroad Tier 2
U.S. EPA Nonroad Tier 2

Product Specifications for 3512C (HD)

Engine Specifications

Dimensions

Capacity for Liquids

3512C (HD) Standard Equipment

Air Inlet System

  • Corrosion-resistant aftercooler core
  • Air Inlet shutoff
  • Regular duty air cleaner

Control System

  • ADEM A3 ECU, left-hand mounted
  • Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls or
  • Cat Digital Voltage Regulator (DVR), includes reactive droop capability, 3-phase voltage sensing, kVAR/PF modes, RFI suppression, min/max exciter limiter and exciter diode monitor, space heater and jacket water heater connection and controls, temperature monitoring for 6 stator RTDs and 2 bearing RTDs via J1939

Cooling System

  • Separate-circuit aftercooled
  • Outlet controlled jacket water thermostat
  • Jacket water pump - gear driven
  • Dual outlet
  • Aftercooler water pump - gear driven
  • Aftercooler water thermostat

Exhaust System

  • Dry exhaust manifold
  • Dual turbochargers, water cooled bearings
  • Exhaust adapter, 297 mm I.D. to 340 mm I.D. (11.7 in to 13.4 in)
  • Weldable flange, 360 mm I.D. (14.2 in)

Flywheel and Housing

  • SAE No. 00 flywheel
  • SAE No. 00 flywheel housing
  • SAE standard rotation

Fuel System

  • Fuel filter simplex (LH) with priming pump (LH)
  • Fuel transfer pump
  • Fuel return line with flexible connection
  • Electronic unit injectors
  • Fuel priming pump

Instrumentation

  • Emergency stop button
  • Analog gauges:
  • Service port connector
  • Customer connection terminal blocks

EMCP 4.3 Control Panel

  • 140 mm (5.5 in) Graphical Display
  • Communication
  • Controls
  • Generator Set Protection
  • Outputs
  • Inputs
  • Other Features

Lubrication System

  • Crankcase breather
  • Oil cooler
  • Shallow oil pan
  • Oil drain extension, 2 in NPT female connection
  • Simplex oil filter

Mounting System

  • 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
  • Viscous damper drive line coupler

Power take-offs

  • Accessory drive
  • Lower LH front (available for PTO usage)
  • Front housing, two-sided

Protection System

  • Engine alarms, derate, and shutdown in abnormal operation

Starting System

  • TDI air starting motor, RH - 1034 kPa (150 psi)
  • LH control air silencer

General

  • Paint - Cat yellow
  • Vibration damper and guard
  • Lifting eyes
  • Lift and cable two provisions

3512C (HD) Optional Equipment

Air Inlet System

  • Heavy duty air cleaner
  • Remote air inlet adapter - rectangular
  • Remote air inlet adapter - round

Control System

  • Load sharing governor, 2301A
  • Load sharing module
  • Governor conversion to 0-200 mA direct rack control

Cooling System

  • Radiator options:
  • Coolant level sensor
  • Coolant conditioner

Exhaust System

  • Exhaust flexible fitting, 318 I.D. mm (12.5 in)
  • Elbow, 305 mm (12 in)
  • Muffler 305 mm (12 in), non spark arresting
  • Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
  • Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box

Fuel System

  • Custom fuel filter
  • Primary fuel filter
  • Primary fuel filter with water separator

Generator Attachments

  • Barrel-mounted petroleum terminal box with air filter and pressure differential switch
  • Barrel-mounted petroleum terminal box
  • Current droop transformer
  • Cable access box
  • Low voltage extension box
  • Current sensing transformers (3)
  • Bearing temperature detectors

Instrumentation

  • Communications module PL1000T
  • Communications module PL1000E
  • Thermocouples installed, one per cylinder

Lubrication System

  • RH installed centrifugal oil filter
  • Crankcase fumes disposal
  • Oil level regulator

Mounting System

  • 7.62 m (25 ft) outer base
  • 9.14 m (30 ft) outer base
  • 12.19 m (40 ft) outer base
  • Package isolator supports (3), for mounting inner base to customer-supplied base
  • Custom base

Power Take-off

  • Alternator, 24V, 60A
  • Crankshaft pulley

Protection System

  • Explosion relief valves (3)
  • Metal particle detector switch
  • Metal particle detector with annunciator

Starting System

  • Custom starting motor
  • Air pressure regulator

General

  • LH installed engine barring group
  • Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
  • Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
  • Jacket water heater lines

See how 3512C (HD) compares against frequently compared products.

Tools And Expert Help At Every Turn

Cat Connect: Get More from Every Asset

<ul> <li><b>INFORM</b> : Remotely access equipment information so you can make more informed decisions</li> <li><b>ADVISE</b> : Receive clear predictive recommendation about your equipment from your Cat Dealer to reduce costs and increase revenue</li> <li><b>PARTNER</b> : Let your Cat<sup>®</sup> Dealer manage your equipment so you can focus on your business</li> </ul>

Learn More

Product Brochures and More Are Ready to Download!

Full specifications, product brochures and more. Sign up below for additional information. Or for instant access, you can skip this form.


Check out current offers for the 3512C (HD)

View More Offers