Forestry

Maximizing the Life of Your Undercarriage

When you purchased your Cat® forestry machine with genuine Cat Undercarriage, you made a smart investment.

A significant portion of the owning and operating cost of your machine is undercarriage related.  Following these simple tips will help you keep costs down.

 

  • High forward travel rates (idlers first)
  • Heavy lifting and grading must occur over the idlers.
  • Light lifting and grading, any other location around the machine.
  • Occasionally, slightly lift tracks to clean soil from bushings:
    –  maintains proper track tension.
    –  minimizes track indexing due to packing.
  • Minimize travelling with heavy lift over side.
  • Contact between shoe and shoe support wears away leading edge of shoe and can cause shoe crossing/breaking.
  • Typically short distances
  • Idlers in downhill position so heavy loads are transferred from shoes to links to idlers, not shoes to links to bushings to sprockets.
  • Do not travel with grapple full of logs over side. This can cause leading edge of shoe to contact shoe supports, wearing away the leading edge much faster.
  • Minimize stump jumping on edges of shoe. If you must climb over stump, approach in dead center of shoe to minimize shoe deflection/crossing.
  • Minimal travel
  • A smooth bench is key to long life:
    –  Undercarriage life is not typically limited due to wearing out.
    –  Structural failures are common as the machine sits in one location, used only for impacts/load shifting.
    –  If your machine is rocking back and forth, the bench is not adequately built.
  • Rotate track occasionally to spread the loading evenly across the undercarriage.
  • Heavy lift over idlers; load truck over side:
    –  Keep boom and stick close when over side to minimize tilting/leaning.
    –  Minimize travel with machine leaning over side. Contact between shoe and shoe support wears away leading edge of shoe and can cause shoe crossing/breaking.
  • High travel with heavy lift, one of the most difficult applications:
    –  Idlers first – for both wear and structural concerns.
    –  Do not travel with loads.
    –  If you can’t avoid a stump, approach it center of shoe (between bolts). Do not clip edge of stump with edge of shoe.
    –  If clear-cutting small trees over side, switch sides of machine frequently to share load from right track to left; do not swing cab 180 degrees.

 

Some of the highest load cycles are seen during loading the machine on the trailer.

  • Approach trailer square on, both tracks at the same time.
  • Make sure your shoes contact the trailer in the center of the shoes, not between the shoes.
  • Use boom/stick to assist in setting machine down easy:
    –  Free falling a couple of feet can send loads many times the machine’s weight into the undercarriage.
  • It is vital to the machine to avoid contact between shoe and shoe support.
  • Ice lugs should be applied only when absolutely necessary:
    –  Minimize length and height of ice lugs.
    –  Apply only to leading edge grousers – pattern of 2, 1, 2, 1, 2, 1 or staggered. Do not apply too far outside of track bolts.
  • Daily cleanouts are necessary, especially during freeze-thaw situations:
    –  Special focus around carrier rollers (minimizes roller seizing) and between bushings (allows proper sprocket-to-bushing contact).
  • For machines with track over 1,500 hours and parked for a month or more:
    –  Exercise the track for a few minutes each month so track joints do not seize up.
  • Inspect daily for loose hardware, broken shoes, etc. Hammer to listen for loose hardware and repair/replace immediately.
  • At every track replacement, inspect shoe supports for excessive wear. Repair/replace as necessary.
  • Maintain track tension daily.
Placeholder image
Twice the coverage on compact machines
Learn more
Financing & Insurance

You can count on Cat Financial to provide the best financial solutions, built just for you.

See our Current Offers
Cat® Technology

We are constantly developing and refining advanced technologies to help make your equipment more productive and efficient.

Learn More
Connect with the Experts

Connect with the experts. Learn from the experts and get advice from your peers - check out our blogs and online forums.

Read our Blogs
Cat® Dealers Make the Difference

Your Cat dealer is committed to maximizing your success, helping you get the most out of your operations with site-level solutions, service and support.

Connect with your dealer today
The Power of Cat® Equipment

While superior quality is easy to see, it's over time and throughout your equipment ownership experience that the superior value of Caterpillar really becomes clear.

Learn More
CAT® Product Stories

Learn how customers all over the world are using Cat® products to do great things.

Learn More