SW360B, 203 mm (8 in)
Specifications
Overview
Ideal for asphalt patch cutting, road expansion join cuts, and utility trenching.
| Maximum Depth of Cut | 24.0 in 600.0 mm | More |
| Weight | 3075.0 lb 1395.0 kg | More |
| Bit Speed at Maximum Flow | 1180.0 ft/min 360.0 m/min | More |
| Conical Bits - Per Wheel | 96 96 | More |
| Drive Method | Piston motor/Planetary Piston motor/Planetary | More |
| Length | 93.0 in 2365.0 mm | More |
| Optimal Hydraulic Pressure | 3335.0 psi 230.0 bar | More |
| Optional Bit Type | Standard Standard | More |
| Overall Height | 70.0 in 1765.0 mm | More |
| Overall Width | 73.0 in 1850.0 mm | More |
| Required Hydraulic Flow | 33.0 gal/min 125.0 l/min | More |
| Side Shift Travel | 22.0 in 550.0 mm | More |
| Standard Bit Type | Concrete Concrete | More |
| Wheel Speed at Maximum Flow | 74 rpm 74 rpm | More |
| Wheel Torque at Maximum Pressure | 5538.0 ft-lb 7509.0 N·m | More |
| Wheel Width | 8.0 in 200.0 mm | More |
| Motor Displacement | 106.0 in³/rev 1686.0 cm³/rev | More |
| Required Hydraulics | High Flow XPS High Flow XPS | More |
| Trench Cleaning Device | Yes Yes | More |
Benefits & Features
Application
Ideal for asphalt patch cutting, road expansion join cuts, and utility trenching.
Direct Drive System
Direct drive system features a hydraulic piston pump motor to ensure maximum cutting rate and wheel torque for optimal production performance and efficiency.
Hydraulic Side-Shift and Depth Control
Hydraulic side-shift and depth control is standard on all models and is controlled from the operator's compartment. Hydraulic side-shift allows wheel positioning from center to the far right of center. This allows for cutting close to curbs, walls and other obstructions, and minimizes need to reposition the machine.
Trench Cleaning Device
The trench cleaning device is hydraulically operated from the operator's compartment. The blade can be controlled up and down to remove spoil and ensure a clean trench.
Deflector Plates
Deflector plates remove spoil from the machine's path for smooth operation. Spoil can be discharged left, right, or on both sides of the wheel saw with installation of included blanking plates.
Max Pro Pressure Gauge
Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on XHP models.
Bits
Concrete bits are standard on all models. Optional all purpose conical bits are available for all Cat Wheel Saws for tarmac and asphalt applications. Extreme life bits are available for extreme duty Cat Wheel Saw applications.
Self Standing
Self standing frame design improves connection and parking.
Optional Guide Bar
Optional guide bar allows operator to position wheel saw for a straight cut and aids in visibility.
